Physical SVP hardware description
The physical SVP is provided by Hitachi Vantara. The physical SVP is a 1U management server that attaches to each VSP disk controller (DKC). The front and rear panels of the Hitachi-supplied physical SVP, along with the physical SVP specifications, are described.
SVP front panel
The front panel of the physical SVP is equipped with LEDs, a reset button, and a power button.
|
Number |
Description |
| 1 |
LEDs. From left to right, the LEDs are:
|
| 2 |
Reset button. |
| 3 |
Power button. Applies power to or removes power from the SVP. |
SVP rear panel
The only ports used on the rear panel of the physical SVP are the power socket and the four LAN ports.
|
Number |
Description |
| 1 |
Power socket. Attach the power cable supplied with the SVP. |
| 2 |
Four LAN ports arranged as follows: LAN3 LAN4 LAN1 LAN2 These ports connect to your IP network, the management console PC, and the user LAN port on each storage system controller. |
Service processor hardware specifications
The following table lists the hardware specifications for the service processor (SVP) provided by Hitachi Vantara.
|
Item |
Specification |
|
Dimensions |
Height: 1.7 inches (43 mm) Width: 17.2 inches (437 mm) Depth: 14.5 inches (369 mm) Weight: 14 lbs (6.4 kg) |
|
Processor |
Celeron G1820 2.7-GHz 2M, 2C, 2T
|
|
Memory |
8-GB RAM DDR3 |
|
Hard drive |
2 TB |
|
Network interface card |
x4 ports (on-board NIC) + x1 IPMI (BMC) port |
|
Fans |
2 x 4-cm 4-pin PWM fans |
|
Operating system |
Windows Embedded Standard 7 |
|
Manufacturer |
Super Micro (through Synnex) |
Physical SVP electrical specifications
The following table lists the electrical specifications for the physical SVP supplied by Hitachi Vantara.
|
Item |
Specification | |
|
Rated AC voltage |
100-240 V, 50-60 Hz, 4.2 - 1.8A | |
|
Power supply |
350-Watt AC power supply with PFC | |
|
AC voltage |
100-240 V, 50-60 Hz, 4.2 - 1.8 Amp | |
|
Power supply safety / EMC |
| |
|
MFT p-code |
Description |
Watts |
|
MBD-X10SLM+-LN4F-O |
Single-socket H3 (LGA 1150) / 32-GB DDR3 ECC 1600 MHz / 6x SATA / 4x GbE |
20 |
|
CSE-512F-350B |
Two 350 W 3.5-inch internal drive bays |
26.4 |
|
CM8064601483405 |
Intel Celeron G1820 2.7 Ghz 2M tray |
53 |
|
0F11000 |
3.5-inch 25.4 mm 2 TB 32 MB 7200 RPM |
9.1 |
|
KVR16E11S8 |
4 GB 1600 Mhz DIMM SR x8 with TS Kingston F |
4.05 |
|
112.55 Watts total |
VA is 140.69, with a 0.8 power factor.
Physical SVP environmental specifications
The following table lists the environmental specifications for the physical SVP supplied by Hitachi Vantara.
|
Item |
Specification |
|
Operating temperature |
41°F ~ 95°F (5°C ~ 35°C) |
|
Non-operating temperature range |
-40°F ~ 140°F (-40°C ~ 60°C) |
|
Operating relative humidity range |
8% ~ 90% (non-condensing) |
|
Non-operating relative humidity range |
5% - 95% (non-condensing) |