Monitoring the storage system
You can check whether an error has occurred in a storage system by checking the LED alert for Health Status. Failure information can be also sent in an email message or SNMP trap notification. If a failure is identified, you can check SIMs in the alert list from the maintenance utility and take appropriate action. If the usage rate of a pool exceeds a threshold, or if an error occurs during the operation of a snapshot, you can check the messages in the Health Status message box to identify the problem, and then take specific action.
Checking health status
You can check for problems in the storage system. If a problem occurs in a pool or snapshot, take action according to the displayed message.
In the navigation bar, click Error or Warning.
If there is no problem, Normal displays.
Review any message displayed to identify pools or snapshots where a problem has occurred, and then take appropriate action.
Checking storage system alerts in the maintenance utility
When a failure detection notification for the storage system is sent in Health Status, an email message, or an SNMP trap message, you can check the alert information by using the maintenance utility, and then take appropriate action.
Before you begin
Procedure
In the navigation bar, click
(Settings), and then select Maintenance Utility to open the maintenance utility.
Click the Alerts tab to display the list of alerts.
Check the alerts and then take appropriate action based on the notification information.
In the maintenance utility, click Log Out.