Skip to main content
Close
Hitachi Vantara Knowledge

Hardware description

  1. Last updated
  2. Save as PDF
The physical SVP3 with Windows 10 Enterprise operating system is provided by Hitachi Vantara. The physical SVP3 is a 1U management server that attaches to each disk controller (DKC) of the storage system. The following sections describe the front and rear panels of the Hitachi Vantara-supplied physical SVP3 and provide the physical, electrical, and environmental specifications.
Child Topics

Front panel
GUID-3451BF5D-E3E7-4FA1-8218-CDCD86D25B0F-low.png

Item

Name

Description

1

SVP3 drive

Orange flashing LED indicates that the drive is busy.

2

HUB reset button

Restarts LAN2, LAN3, and LAN4 connected to the internal HUB.

The SVP3 will not restart, and LAN1 will not be reset.

3

MB reset button

Restarts the SVP3 motherboard and LAN1. This will cause the Windows OS and all applications running on the operating system to reboot.

LAN2, LAN3, and LAN4 will not be reset.

4

Power button

Press the button for about 1 second to power on and power off the SVP3.

To forcibly power down the SVP3, press and hold the button for at least 5 seconds.

LED:

  • Green: SVP3 is powered on.
  • Flashing green: SVP3 is in a sleep state.
  • Off: SVP3 is off.
Parent Topic

Back panel
GUID-E9EF2B55-5C56-4124-AD32-7F895F088B1F-low.png

Item

Name

Description

1

HDMI

Not used
2

USB

Not used
3

LAN1

Connects to Maintenance PC
4

LAN2

Connects to CTL1
5

LAN3

Connects to CTL2
6

LAN4

Connects to management network
7Link/Activity LED
  • Orange: Indicates link is up.
  • Orange flashing: Indicates network activity
8Speed LED
  • Yellow: Indicates communication speed of 1000 Mbps.
  • Green: Indicates communication speed of 100 Mbps.
  • Off: Indicates communication speed of 10 Mbps.
Parent Topic

Voltage selector switch

The power supply in the SVP3 has a manual voltage selector switch that must be set to either 115V or 230V (default - 230V). To prevent any damage to the power supply, you must set the voltage selector switch to the correct voltage for your system environment.

CautionThe manual voltage selector switch must be set to the correct voltage before installing the rail kit to the SVP3.
GUID-DE11EFA9-FC22-4C0B-996B-CF960E3358CC-low.png

The SVP3 has a tamper-proof label covering the voltage selector switch which is set to the default 230V setting. If this label has been removed, you must confirm the switch setting before installing the rail kit.

GUID-F21C11B2-2787-46A2-932F-0A6FA808E067-low.png
Parent Topic

Hardware specification

Item

Specification

Model Number

  • DW-F850-SVP3 (Windows 10 IoT Enterprise 2019 LTSC )
  • DW-F850-SVP3A (Windows 10 IoT Enterprise 2021 LTSC)

Dimensions

Height: 43.8 mm (1.7 inches)

Width: 435.2 mm (17.1 inches)

Depth: 270 mm (10.6 inches)

Weight: 4 kg (8.8 lbs)

Processor

Skylake Core i3 family, Core i3-6100U, 2.3GHz

Memory

8GB, SO-DIMM 2133MT/s DDR4, None ECC

Storage media

1 TB 7200 RPM SATA HDD

Network interface card

4 x Gigabit Ethernet ports

(NIC:x2 ports (on-board NIC), 1 port is branched to 3 ports by HUB located within the SVP3 server.)

Maximum temperature

Up to 40°C (104°F)

The SVP3 is supported in high-temperature environments. Do not operate in any location with temperatures above 40°C (104°F).

Parent Topic

Electrical specification

Item

Specification

Rated AC voltage

100-120V / 200-240V 50-60 Hz, 2.1A / 1.2A

Power supply

200 W AC power supply

Power supply safety / EMC

  • UL/CSA: UL/cUL+CB standard:
  • UL/cUL 62368/ IEC 62368 + IEC 60950-1
  • CCC: CCC GB4943.1-2011
  • FCC/ICES: FCC/ICES/VCCI Class A
  • VCCI: VCCI Class A
  • CCC: CCC CB9254 2008(Class A), GB17625.1 2003
Parent Topic

Environmental specification

Item

Specification

Operating temperature

10°C ~ 40°C

(50°F ~ 104°F)

Non-operating temperature range

-10°C ~ 50°C

(14°F ~ 122°F)

Operating relative humidity range

8% ~ 90% (non-condensing)

Non-operating relative humidity range

8% - 90% (non-condensing)

Parent Topic