Skip to main content
Close

We've Moved!

Product Documentation has moved to docs.hitachivantara.com
Hitachi Vantara Knowledge

Changing the SVP IP address

  1. Last updated
  2. Save as PDF

You can use Windows OS on the SVP or the Storage Device list to change the IP address of the SVP.

Child Topics

Changing the SVP IP address in Windows

CautionDo not connect network servers such as the proxy between the client PC, SVP, and the storage system.

Use this procedure if a storage system is not registered on the SVP or the storage system service has not started.

Procedure

  1. On the SVP, click Start Control Panel Network and Sharing Center.

  2. Click Change adapter settings.

  3. Click a network for which you want to set an IP address, and then set the IP address.

Parent Topic

Changing the SVP IP address using Storage Device List

To change the SVP IP address in Storage Device List, change the IP address registered using the SVP's Windows operating system, and then perform the following procedure.

Before you begin

  • Do not register the storage system on the SVP.
  • Stop the service of the storage system.

Procedure

  1. On the SVP, click Start All Programs Device Manager - Storage Navigator StorageDeviceList.

    The Storage Device List window opens.

  2. In the top-right side of the window, click SVP IP Address.GUID-822134BA-1F4E-49F0-BFA1-E853697E4929-low.png

    The Change SVP IP Address window opens. GUID-2F37BC39-B054-4A31-A4F3-AFB50486A3BE-low.png

  3. Click IPv4 or IPv6.

  4. Enter the new IP address of the SVP.

  5. Click Apply.

Parent Topic