Physical SVP (Windows 10 Enterprise) hardware description
The physical SVP with Windows 10 Enterprise operating system is provided by Hitachi Vantara. The physical SVP is a 1U management server that attaches to each VSP disk controller (DKC). The following sections describe the front and rear panels of the Hitachi Vantara-supplied physical SVP, along with the physical, electrical, and environmental specifications.
SVP (Windows 10 Enterprise) front panel
The front panel of the physical SVP with Windows 10 Enterprise operating system is equipped with LEDs, a reset button, and a power button.
|
Item |
Description |
| 1 |
LED (left to right):
|
| 2 |
Reset button |
| 3 |
Power button |
SVP (Windows 10 Enterprise) rear panel
The only ports used at the rear panel of the physical SVP are the power socket and the four LAN ports. The following ports connect to your IP network, the management console PC, and the user LAN port on each storage system controller.
|
Item |
Description |
| 1 |
Management (DKC CTL1) - LAN3 port |
| 2 |
Management (DKC CTL2) - LAN4 port |
| 3 |
Maintenance - LAN2 port |
| 4 |
Management (User) - LAN1 port |
The SVP running Windows 10 operating system does not provide an option to disable Spanning Tree Protocol (STP). If your network has BPDU enabled to prevent loops, connect the user LAN port on controllers 1 and 2 to an Ethernet switch that is also connected to the LAN1 port on the SVP.
After the Initial Startup Wizard is complete, the SVP can be used in non-bridge mode. In this mode, the cables can be removed from SVP ports LAN3 and LAN4 and attached to switches. For more information, contact customer support.
Service Processor (Windows 10 Enterprise) hardware specifications
The following table lists the hardware specifications for the service processor (Windows 10 Enterprise) provided by Hitachi Vantara.
|
Item |
Specification |
|
Dimensions |
Height: 1.7 inches (43 mm) Width: 17.2 inches (437 mm) Depth: 9.8 inches (249 mm) Weight: 10 lbs (4.5 kg) |
|
Processor |
Intel N3710 Pentium processor, 4C/4 threads, 1.6 GHz 2M cache, 6W |
|
Memory |
2 x 4 GB DDR3 1600MHz |
|
Storage media |
1 TB 5400 RPM SATA HDD |
|
Network interface card |
1-GbE x 4 ports (on-board NIC) x1 IPMI (BMC) port |
|
Fans |
2 x 4028 mm 13KPRM 4-pin PWM fans |
|
Operating system |
Windows 10 Enterprise |
|
Maximum temperature |
Up to 40° C (104° Fahrenheit) The SVP is supported in high-temperature environments. Do not operate in any location with temperatures above 40°C (104° Fahrenheit). |
Physical SVP (Windows 10 Enterprise) electrical specifications
The following table lists the electrical specifications for the physical SVP provided by Hitachi Vantara.
|
Item |
Specification |
|
Rated AC voltage |
100-240 V, 50-60 Hz, 4 - 2A |
|
Power supply |
200 W AC power supply |
|
AC voltage |
100-240 V, 50-60 Hz, 4 - 2 Amp |
|
Power supply safety / EMC |
|
Physical SVP (Windows 10 Enterprise) environmental specifications
The following table lists the environmental specifications for the physical SVP supplied by Hitachi Vantara.
|
Item |
Specification |
|
Operating temperature |
41°F ~ 104°F (5°C ~ 40°C) |
|
Non-operating temperature range |
-40°F ~ 158°F (-40°C ~ 70°C) |
|
Operating relative humidity range |
8% ~ 90% (non-condensing) |
|
Non-operating relative humidity range |
5% - 95% (non-condensing) |