Skip to main content
Hitachi Vantara Knowledge

Get event cause and resolution

Get the cause and resolution for a specific event ID. The cause and resolution for an event does not change for any specific HNAS software version, and so can be safely stored and re-used by a client.

HTTP request syntax (URI)
GET <base_URI>/v8/storage/event-details/{eventId}
Parameters
Name Type Required Values Description
eventId URI_PARAM Y number ID of the event to retrieve the cause and resolution.
Return codes
Code Data Description
200 eventDetails Event cause and resolution details retrieved successfully.
400 Error Message Missing or invalid request contents.
404 Error Message Requested resource not found.
500 Error message Error associated with the storage system.

Any HTTP status code other than 200 indicates that the API did not complete successfully.

Request example
curl -vk -H "X-Api-Key: zrxvSDAv9x.RIP4gkmKarG3beF.or.4Tc2im7oeqYN88C9XPGHxbXC" https://172.17.11.11:8444/v8/storage/event-details/8205
Response example
HTTP/1.1 200 OK
{
  "eventDetails": {
    "cause": "Chassis drive volume has less than the recommended free space.",
    "eventId": 8205,
    "resolution": "Free up space on the associated file system by deleting unwanted packages."
  }
}

 

  • Was this article helpful?