Skip to main content
Close
Hitachi Vantara Knowledge

Interfaces resource

  1. Last updated
  2. Save as PDF

The interfaces resource provides management for ethernet, aggregate, VLAN and fibre channel (host port) interfaces.

Child Topics
  • Interfaces object model

    The object model describing this resource contains the following objects.

  • Get ethernet interfaces

    Gets all ethernet interfaces.

  • Get aggregate interfaces

    Get a list of aggregate network interfaces. An aggregate is a collection of one or more physical interfaces that are bundled together to behave as a single logical interface.

  • Get an aggregate interface

    Get a single aggregate network interface. An aggregate is a collection of one or more physical interfaces that are bundled together to behave as a single logical interface.

  • Create an aggregate interface

    Creates the binding of one or more physical interfaces to form an aggregate network interface. All physical interfaces must be of the same speed.

  • Modify an aggregate interface

    Updates the details of an aggregate network interface.

  • Delete an aggregate interface

    Deletes the binding of physical interfaces that form an aggregate interface. An interface can’t be deleted if it has any assigned IP addresses or if it is referenced by a VLAN interface.

  • Get VLAN ethernet interfaces

    Gets all configured VLAN interfaces.

  • Get a VLAN ethernet interface

    Gets a specific VLAN interface.

  • Create a VLAN interface

    Creates an association between an aggregate ethernet interface and a specific VLAN ID.

  • Delete a VLAN interface

    Delete an existing VLAN interface.

  • Get host ports

    Returns a list of the systems host ports, on all nodes.

  • Get host port

    Get an individual host port. In the case of this API call, the object ID is specific to a node and port and will show the current status of the specific port.

  • Set host port

    Sets parameters for a specific host port. In the case of this API call, the port index associated with the object ID is used to set the same details on all cluster nodes – this is required for clustering to function successfully.

  • Get host port supported speeds

    Returns a list speed that are supported for the system host ports. The values returned by this API call are the values that should be accepted by the Set host port API call..