To view the existing IP addresses, navigate to
.
The following table describes the fields on this page:
| Field / Item
| Description
|
| Unified Management IP Addresses
(NAS module only)
| The IP addresses of both nodes in the
NAS module. These addresses are read-only and cannot be modified in the
NAS Manager. To change these addresses, use the maintenance utility.
|
| IP Addresses
| This field contains the IP address for the Admin and File services or for server/cluster node management.
|
| Label
| This field contains the name of the EVS (virtual server) that is assigned to the IP address.
|
| Type
|
This field contains the type of services or configuration of the server:
- Admin - an IP address associated with the Administrative Services for the cluster. Administration Services IP address can be on the public data network or on the private management network.
- File serving - an IP address associated with the File Services for the cluster. File Services IP addresses must be on the public data network.
-
Node - the IP address associated with the physical cluster node. As File and Administrative services can migrate between nodes, the Cluster Node IP address communicates with the node instead of a service.
|
| Port
| This field contains the interface in use by the IP address:
- agX identifies one of the file serving aggregation interfaces
- eth-agX identifies one of the Aggregate Linux interfaces
- agX-vlanXXXX identifies one of the VLAN interfaces
- eth0 or
eth1 identifies a 10/100/1000 interface for a Hitachi NAS Platform
-
mgmnt1 identifies the 10/100 management interface for a Hitachi High performance NAS Platform
|
| Details
|
Click this button to view the
Modify IP Address page. This page enables the Administrator to change the interface IPv4 and/or IPv6 settings.
|
- Parent Topic
- Network Administration Guide
This guide provides information about the server's network usage, and explains how to configure network interfaces, IP addressing, name and directory services.
