Adding IP addresses
NoteIt is not possible to add or modify an IP address for a
NAS module. Use the maintenance utility to perform these functions.
Procedure
Navigate to Add IP Address page appears.
. TheSelect a Virtual Server (EVS) to assign to the IP address.
Select an aggregation or management interface:
- agX identifies one of the file serving aggregation interfaces
- eth-agX identifies one of the aggregate Linux interfaces
- agX-vlanXXXX identifies one of the VLAN interfaces
- eth0 or eth1 identifies a 10/100/1000 interface for an HNAS server
NoteWhen assigning an IP address to a file-serving EVS, the Administrator must specify a link aggregation or VLAN interface.Enter the IP address and Subnet Mask for the selected interface.
Verify the settings, and then click OK to apply the settings or cancel to decline.