Skip to main content
Hitachi Vantara Knowledge

Accessing the Tenant Management Console for a tenant

If a tenant is configured to allow system-level users to manage it, you can open the Tenant Management Console for that tenant directly from the HCP System Management Console. You can use this method to access the Tenant Management Console for an HCP tenant only if at least one of your client IP addresses is allowed access to the Tenant Management Console for that tenant.

Before you begin

To access the Tenant Management Console directly from the System Management Console, you need the monitor or administrator role.

Procedure

  1. In the top-level menu of the System Management Console, click Tenants.

  2. Take one of these actions:

    • In the list of tenants, click the access control (tenant access control icon) for the tenant that you want to access.

    • In the list of tenants, click the name of the tenant that you want to access. Then click the tenant URL in the tenant Overview panel.

    The browser window switches to the tenant Overview page in the Tenant Management Console.

  3. To return to the System Management Console from the Tenant Management Console, click the return control (Return to System icon ) in the top right corner of the Tenant Management Console window.

    NoteAfter opening a Tenant Management Console from the System Management Console, do not use the browser back button to return to the System Management Console. Doing so can have unpredictable results.

 

  • Was this article helpful?