Skip to main content
Hitachi Vantara Knowledge

HCP system log messages

HCP maintains a log that records messages about system events. The following table lists each possible event, provides an explanation of the event and a recommended action plan, and categorizes the event severity. The events are listed in ascending order by ID.

IDEventExplanationActionSeverity
1000HCP startedThe HCP system started.No action is required.Notice
1001HCP shutting downThe HCP system is shutting down.If any nodes do not power off automatically, wait a few minutes and then power them off manually.Notice
1002Node startedA node started.No action is required.Notice
1003Node shut downA node shut down.If this event is unexpected and the node does not restart automatically, contact your authorized service provider. Do not try to restart the node manually, as that may cause the loss of information needed to diagnose the problem.Notice
1004Volume startedA logical volume came online.No action is required.Notice
1005Volume shut downA logical volume went offline.Contact your authorized service provider.Notice
1006Volume failureA logical volume failed.Contact your authorized service provider.Error
1007Node removedA node has been permanently removed from the HCP system.No action is required.Notice
1008Time sync problemThe internal clock on a node is out of sync with the clocks on the nodes in the rest of the HCP system.If the problem persists, contact your authorized service provider.Error
1009Node addedA new node has been added to the HCP system.No action is required.Notice
1010Previously removed node re-addedA node that was removed from the system has been powered on again.Remove the node again.Error
1012Metadata DPL is 1The system was configured with metadata DPL 1.No action is required.Warning
1013FailoverA node in a cross-mapped pair failed. The other node has taken over management of the logical volumes previously managed by the failed node.If the failed node does not restart automatically, contact your authorized service provider. Do not try to restart the node manually, as that may cause the loss of information needed to diagnose the problem.Error
1014HCP rebootingThe HCP system is restarting.No action is required.Notice
1015FailoverA node in a cross-mapped pair failed. The other node will take over management of the logical volumes previously managed by the failed node.If the failed node does not restart automatically, contact your authorized service provider. Do not try to restart the node manually, as that may cause the loss of information needed to diagnose the problem.Error
1016Volume recoveredA logical volume recovered.No action is required.Notice
1017Node down for an extended amount of timeA node has been unavailable for an extended amount of time.Contact your authorized service provider.Error
1018HCP is read-onlyThe HCP system has become read-only due to metadata unavailability. Configuration changes and changes to namespace content are not allowed. Services have been suspended.Contact your authorized service provider.Error
1019HCP is no longer read-onlyThe previously unavailable metadata has become available, so the HCP system is no longer read-only due to metadata unavailability.No action is required.Notice
1020Region-count setting is invalidThe region count was changed to a value that is either too large, too small, or not a number. The actual number of regions has not changed.Contact your authorized service provider.Error
1021Region count is changingThe region count was set to a new value.No action is required.Notice
1022Region count has changedThe region count has finished changing to a new value.No action is required.Notice
1023Region-count change has been canceledThe region-count change was canceled.No action is required.Notice
1024Support for DPL 1 changedSupport for DPL 1 was either enabled or disabled.No action is required.Warning
1025External storage volume addedA user added an external storage volume.No action is required.Notice
1026External storage volume updatedA user updated an external storage volume.No action is required.Notice
1027External storage volume deletedA user deleted an external storage volume.No action is required.Notice
1028External storage volume missing necessary permissionsThe share for a new or updated external storage volume was exported without permissions that HCP needs in order to mount the volume.Ensure that the share is exported with the necessary permissions.Warning
1029Cannot mount external storage volumeHCP was unable to mount a new or updated external storage volume.Ensure that the share is exported with the correct configuration on the external device. For more information about this event, see the mount command output displayed with the log message.Warning
1030Cannot mount external storage volumeHCP was unable to mount a new or updated external storage volume.Ensure that the share is exported with the correct configuration on the external device.Warning
1031External volume startedAn external storage volume became available.No action is required.Notice
1032External volume unavailableAn external storage volume is unavailable.Ensure that the share is exported with the correct configuration on the external device and that the HCP node managing the volume is available.Notice
1033External volume failureHCP was unable to connect to an external storage volume.Ensure that the share is exported with the correct configuration on the external device and that all HCP nodes are allowed to mount the share.Error
1034External volume remounteda user remounted an external volume.No action is required.Notice
1035External storage volume missing necessary file naming supportThe share for a new or updated external storage volume was exported without file naming support that HCP needs in order to mount the volume.Ensure that the share is exported with the necessary file naming support.Warning
1036Node rebootingA node is restarting.No action is required.Notice
1050Storage pool createdA user created a storage pool.No action is required.Notice
1051Storage pool updatedA user updated a storage pool.No action is required.Notice
1052Storage pool deletedA user deleted a storage pool.No action is required.Notice
1053Storage component createdA user created a storage component.No action is required.Notice
1054Storage component updatedA user updated a storage component.No action is required.Notice
1055Storage component deletedA user deleted a storage component.No action is required.Notice
1056Storage component abandonedA user abandoned a storage component.No action is required.Notice
1057SSL certificate downloadedA user downloaded an SSL server certificate for storage tiering.No action is required.Notice
1058New SSL certificate addedA user added a new storage tiering client certificate.No action is required.Notice
1059SSL certificate deletedA user deleted a storage tiering client certificate.No action is required.Notice
1060New storage license addedA user added a new storage license.No action required.Notice
1061Storage license expiredA storage license expired.Upload a new storage license.Warning
1062Storage license exceededStorage usage exceed licensed capacity.Delete or relocate objects within the repository or add more licensed capacity.Warning
1066Storage license invalidHCP serial number does not match storage license.Upload a new storage license.Warning
1067Storage component status changedStorage component status was changed.No action is required.Notice
1068Storage component updatedA user updated a storage component.No action is required.Notice
1100Storage capacity warningThe amount of free storage on the HCP storage nodes is low.Consider adding storage capacity to the HCP system before the amount of free storage becomes critically low.Warning
1101Storage capacity criticalThe amount of free storage on the HCP storage nodes may be insufficient to support the addition of new objects.Increase the amount of free storage by adding more storage capacity or deleting objects from the repository.Error
1104Internal SLAB process downThe internal SLAB process is not running. The node will reboot automatically in order to restart the process.No action is required. If this problem persists, contact your authorized service provider.Error
1105IPMI status became unavailableA hardware condition has rendered IPMI status unavailable.No action is required.Warning
1106Location metricsMetrics have been logged according to schedule.No action is required.Notice
1107Adding logical volumesNew logical volumes are being added to a node.No action is required.Notice
1108Logical volumes addedNew logical volumes were added to a node, thereby increasing the storage capacity of the node.No action is required.Notice
1109Logical volumes addedNew logical volumes were added to a node. These are standby volumes for zero-copy failover.No action is required.Notice
1110Failed to add logical volumesThe addition of new logical volumes to a node failed.Contact your authorized service provider.Error
1111Front-end communication status became unavailableA hardware condition has rendered front-end communication status unavailable.No action is required.Warning
1112Storage status became unavailableA hardware condition has rendered storage status unavailable.No action is required.Warning
1113Spindown capacity warningThe amount of free spindown storage on the HCP storage nodes is low.Consider adding spindown storage capacity to the HCP system before the amount of free spindown storage becomes critically low.Warning
1114Spindown capacity criticalThe amount of free spindown storage on the HCP storage nodes may be insufficient to support the addition of new objects.Increase the amount of free spindown storage by adding more storage capacity or deleting objects from the repository.Error
1115Moving databaseThe database is being moved to new logical volumes on a node.No action is required.Notice
1116Database movedThe database has been moved to new logical volumes on a node.No action is required.Notice
1117Failed to move databaseThe database move to new logical volumes on a node has failed.Contact your authorized service provider.Error
1118Old database deletedThe old database has been deleted.No action is required.Notice
1119Moving databaseThe database is being moved to the new dedicated logical volume on a node.No action is required.Notice
1120Database movedThe database has been moved to the new dedicated logical volume on a node.No action is required.Notice
1200Last update sent to Hitachi Device Manager was unsuccessfulHCP is unable to communicate with the HDvM server.Ensure that you have correctly configured Hitachi Device Manager in the System Management Console and that the Hitachi Device Manager server is healthy.Error
1201Log handler test messageA user sent a test message to the syslog servers or SNMP managers.No action is required.Notice
1202About to change syslog settingsA user changed the settings for syslog logging.No action is required.Notice
1203Syslog settings changedA user changed the settings for syslog logging.No action is required.Notice
1204About to change SNMP settingsA user changed the settings for SNMP logging.No action is required.Notice
1205SNMP settings changedA user changed the settings for SNMP logging.No action is required.Notice
1206Email notification failedSMTP or email settings may be incorrect.Check the SMTP and email settings. If the settings are correct, contact your SMTP administrator for help.Warning
1220Successfully downloaded logsThe HCP internal logs have been successfully downloaded.No action is required.Notice
1221Started to download logsA user has requested a download of the HCP internal logs.No action is required.Notice
1222Failed to download logsThe requested download of the HCP internal logs has failed.Try to download the logs again. If that fails, contact your authorized service provider.Warning
1223Started to download logs for nodeHCP has started downloading the internal logs on a node.No action is required.Notice
1224Successfully downloaded logs for nodeHCP has finished downloading the internal logs on a node.No action is required.Notice
1225Failed to download logs for nodeHCP failed to download the internal logs from a node and is continuing with the next node.No action is required.Warning
1226Logs markedA user inserted a message into the HCP internal logs.No action is required.Notice
1227Log encryption key uploadedA user uploaded an encryption key for use when downloading the HCP internal logs.No action is required.Notice
1228Log encryption key deletedA user deleted an encryption key that was used when downloading the HCP internal logs.No action is required.Notice
1229Log download preparation startedA user has requested a download of the HCP internal logs.No action is required.Notice
1230Log download preparation completeLog download preparation is complete, and the HCP internal logs are ready to be download.No action is required.Notice
1231Log download startedThe HCP internal logs have begun streaming to an HTTP client.No action is required.Notice
1232Log download completeThe HCP internal logs have been downloaded.No action is required.Notice
1233Log download preparation complete with issuesLog download preparation finished with issues. The unaffected HCP internal logs are ready to be downloaded.Download one or more of the available logs. Check the nodes identified in the error message.Warning
1500Successfully downloaded health check reportsThe HCP health check reports have been successfully downloaded.No action is required.Notice
1501Started to download health check reportsA user has requested a download of the HCP health check reports.No action is required.Notice
1502Failed to download health check reportsThe requested download of the HCP health check reports has failed.Try to download the health check again. If that fails, contact your authorized service provider.Warning
1503Started to download health check for nodeHCP has started downloading the internal health check on a node.No action is required.Notice
1504Successfully downloaded health check for nodeHCP has finished downloading the internal health check on a node.No action is required.Notice
1505Failed to download health check for nodeHCP failed to download the internal health check from a node and is continuing with the next node.No action is required.Warning
1506Health check report download preparation startedThe HCP system has started to prepare the HCP health check reports for downloading.No action is required.Notice
1507Health check report download preparation completeThe HCP system has finished preparing the health check reports. The reports are now ready to be downloaded.No action is required.Notice
1508Health check report streaming startedThe HCP health check reports have begun streaming to an HTTP client.No action is required.Notice
1509Health check report streaming completeThe HCP health check reports have been downloaded.No action is required.Notice
1510Health check report download preparation complete with issuesHealth check report download preparation finished with issues. The unaffected HCP health check reports are ready to be downloaded.Download one or more of the available health check reports. Check the nodes identified in the error message.Warning
1905Service start skippedA service was not started because the time remaining until a scheduled stop was less than the minimum runtime for the service.No action is required.Notice
1906Scheduled service time period too shortA scheduled time period for a service is shorter than the minimum runtime for the service. The service will not run in that time period.Increase the length of the applicable time period in the service schedule.Warning
1980Service schedule activatedA user activated a service schedule.No action is required.Notice
1981Service schedule activation failedA user tried to activate a service schedule, but the activation failed.Check that the schedule has not been deleted. If the schedule has not been deleted, contact your authorized service provider.Error
1982Service schedule createdA user created a service schedule.No action is required.Notice
1983Service schedule updatedA user updated a service schedule.No action is required.Notice
1984Service schedule deletedA user deleted a service schedule.No action is required.Notice
1900Service worked on regions.A service has finished processing some regions.No action is required.Notice
1901Duplicate elimination service region information.Duplicate elimination service has finished processing some regions.No action is required.Notice
2000Protection service startedThe Protection service has started.No action is required.Notice
2001Protection service stopped: run completeThe Protection service finished successfully.No action is required.Notice
2002Protection service stopped without finishingThe Protection service was interrupted without validating all objects or object parts.No action is required.Notice
2003Protection service stopped without finishingThe Protection service was interrupted without validating all objects or object parts.No action is required.Warning
2004Protection service changed protection setsThe Protection service changed protection sets.No action is required.Notice
2005HCP found an unavailable object or object partHCP could not repair an object or object part because the object or object part was unavailable.Contact your HCP system administrator.Warning
2006HCP found an irreparable object or object partHCP found a broken object or object part it could not repair.Contact your HCP system administrator.Error
2007Protection service beginning repairsProtection service is beginning object or object part repairs.No action is required.Warning
2008Protection service: irreparable object or object partThe Protection service detected a violation it could not fix.Contact your authorized service provider.Error
2009Protection service: unavailable objectThe Protection service detected a violation it could not fix.Contact your authorized service provider.Warning
2010Garbage Collection service startedThe Garbage Collection service has started.No action is required.Notice
2011Garbage Collection service finished: run completeThe Garbage Collection service finished successfully.No action is required.Notice
2012Garbage Collection stopped without finishingThe Garbage Collection service stopped without completing its run. The service will resume automatically at a later time.No action is required.Notice
2013Garbage Collection stopped without finishingThe Garbage Collection service stopped without completing its run. The service will resume automatically at a later time.No action is required.Warning
2017Garbage Collection service beginning repairsThe Garbage Collection service has begun fixing violations.No action is required.Notice
2020Scavenging service startedThe Scavenging service has started.No action is required.Notice
2021Scavenging service stopped: run completeThe Scavenging service finished successfully.No action is required.Notice
2022Scavenging service stopped: run bypassed object(s) or object part(s)The Scavenging service finished successfully. Some objects or object parts were not scavenged in this run.No action is required.Notice
2023Scavenging service stopped without finishingThe Scavenging service stopped without completing its run. Scavenging will resume at a later time.No action is required.Warning
2024Scavenging service stopped without finishingThe Scavenging service stopped without completing its run. The service will resume at a later time.No action is required.Notice
2027Scavenging service beginning repairsThe Scavenging service has begun repairs.No action is required.Warning
2028HCP found an irreparable object or object partHCP was unable to repair the object. The repair may be retried at a later time.Contact your HCP system administrator.Error
2029Scavenging service irreparable objectThe Scavenging service was unable to repair the object. The repair may be retried at a later time.Use the System Management Console to verify the health of the system. If the problem persists, contact your authorized service provider.Error
2030Capacity Balancing service startedThe Capacity Balancing service has started.No action is required.Notice
2031Capacity Balancing service stopped: run completeThe Capacity Balancing service finished successfully.No action is required.Notice
2032Capacity Balancing service stopped: run bypassed object(s) or object part(s)Some objects or object parts were bypassed during this run of the Capacity Balancing service. Those objects or object parts will be handled in a future run.No action is required.Notice
2033Capacity Balancing service stopped without finishingThe Capacity Balancing service stopped without completing its run.No action is required.Warning
2034Capacity Balancing service stopped without finishingThe Capacity Balancing service stopped without completing its run.No action is required.Notice
2037Capacity Balancing service beginning repairsCapacity Balancing service has begun repairs.No action is required.Warning
2040Content Verification service startedThe authentication service has started.No action is required.Notice
2041Content Verification service stopped: run completeThe authentication service finished successfully.No action is required.Notice
2042Content Verification service stopped without finishingThe Content Verification service stopped without completing its run. The service will resume at some point in the future.No action is required.Notice
2043Content Verification service stopped without finishingThe Content Verification service stopped without completing its run. The service will resume at some point in the future.No action is required.Warning
2044HCP found an unavailable object or object partHCP could not repair an object or object part because the object or object part was unavailable.Contact your HCP system administrator.Warning
2045Content Verification service: unavailable objectThe Content Verification service detected a violation it could not fix.Contact your authorized service provider.Warning
2046HCP found an irreparable object or object partHCP found a broken object or object part it could not repair.Contact your HCP system administrator.Error
2047Content Verification service beginning repairsThe Content Verification service has begun repairs.No action is required.Warning
2048Content Verification service: irreparable object or object partThe Content Verification service detected a violation it could not fix.Contact your authorized service provider.Error
2049Annotation no longer presentOne or more objects no longer have a previously added annotation.If annotations were not intentionally deleted, contact your authorized service provider.Warning
2050Duplicate Elimination service startedThe Duplicate Elimination service has started.No action is required.Notice
2051Duplicate Elimination service stopped: run completeThe Duplicate Elimination service finished successfully.No action is required.Notice
2052Duplicate Elimination service stopped: run bypassed object(s) or object part(s)The Duplicate Elimination service finished successfully. Some objects or object parts were not checked during this run. They will be checked in a future run.No action is required.Notice
2053Duplicate Elimination service stopped without finishingThe Duplicate Elimination service stopped during its merge phase without completing its run. The service will resume at some point in the future.No action is required.Warning
2054Duplicate Elimination service stopped without finishingThe Duplicate Elimination service stopped during its merge phase without completing its run. The service will resume at some point in the future.No action is required.Notice
2057Duplicate Elimination service beginning repairsThe Duplicate Elimination service has begun merging objects and object parts.No action is required.Notice
2058Service beginning repairs from a remote systemA service has begun making repairs from a remote system.No action is required.Notice
2059Fast Object Recovery service startedThe Fast Object Recovery service has started.No action is required.Notice
2060Fast Object Recovery service stopped: run completeThe Fast Object Recovery service finished successfully.No action is required.Notice
2061Fast Object Recovery service stopped without finishingThe Fast Object Recovery service stopped without completing its run. The service will resume at some point in the future.No action is required.Notice
2062Fast Object Recovery service stopped without finishingThe Fast Object Recovery service stopped without completing its run. The service will resume at some point in the future.No action is required.Warning
2064Fast Object Recovery service beginning repairsTheFast Object Recovery service has begun repairs.No action is required.Warning
2065Fast Object Recovery service: irreparable objectThe Fast Object Recovery service detected a violation it could not fix.Contact your authorized service provider.Error
2066Fast Object Recovery service: failure limit reachedThe Fast Object Recovery service experienced successive failures.Contact your authorized service provider.Error
2070Object or object part has been shreddedAn object or object part was shredded.No action is required.Notice
2079Compression/Encryption service stopped without finishingThe Compression/Encryption service stopped without completing its run. The service will resume at some point in the future.No action is required.Notice
2080Compression/Encryption service startedThe Compression/Encryption service has started.No action is required.Notice
2081Compression/Encryption service stopped: run completeThe Compression/Encryption service finished successfully.No action is required.Notice
2082Compression/Encryption service stopped without finishingThe Compression/Encryption service stopped without completing its run. The service will resume at some point in the future.No action is required.Warning
2083Service could not startA service was requested to run but could not start for some reason.No action is required.Warning
2084Disposition service startedThe Disposition service has started.No action is required.Notice
2085Disposition service stopped: run completeThe Disposition service finished successfully.No action is required.Notice
2086Disposition service stopped without finishingThe Disposition service stopped without completing its run. The service will resume at some point in the future.No action is required.Warning
2091Disposition service stopped without finishingThe Disposition service stopped without completing its run. The service will resume at some point in the future.No action is required.Notice
2100HCP search facility indexing.HCP search facility has started indexing.No action is required.Notice
2102HCP search facility indexing failureHCP search facility could not index object(s). Displays specific details.Contact your authorized service provider.Error
2103HCP search facility connection failure.The search console failed to establish connection to the HCP search facility.Ensure that the HCP search facility search configuration is correct. If the configuration is correct and the problem persists, contact your authorized service provider.Error
2105Replication link createdA user created a replication link.No action is required.Notice
2106Replication link suspendedA replication link has been suspended.No action is required.Notice
2107Replication link resumedA suspended replication link has been resumed.No action is required.Notice
2108Replication link failureA replication link is not working.Check network connectivity to the remote system.Error
2109Replication link deletedA replication link was deleted.If this event is unexpected, contact your authorized service provider.Warning
2110Replication link read-onlyThe tenants and directories included in a replication link are now read-only on this system.No action is required.Notice
2111Replication link authorizedA replication link was authorized.No action is required.Notice
2112Replication link updatedA user updated the configuration of a replication link.No action is required.Notice
2113Replication link failed overA user failed over a replication link. The replicated tenants and directories are now read-write on the replica and read-only on the primary system.Redirect client requests to the replica.Notice
2114Replication link failed backA user failed back a replication link.No action is required.Notice
2115Replication data recovery startedData recovery has started on a replication link. The replicated tenants and directories are read-write on the replica and read-only on the primary system.Monitor the recovery progress in the System Management Console.Warning
2116Replication data recovery completedData recovery has completed on a replication link. The replicated tenants and directories are now read-write on the primary system and read-only on the replica.Redirect client requests to the primary system.Warning
2117Replication link missing on remote systemA replication link configured on this system is missing on the remote system. The link has been suspended.Restore the replication link to begin the recovery process.Error
2118Object replicated with collisionsAn object being replicated conflicts with an existing object on the target system. The object has been stored in the .lost+found directory on the target system.No action is required.Warning
2119Object did not replicateAn object was not replicated.Contact your authorized service provider.Error
2120Object or object part did not replicate; will retry laterAn object or object part was not replicated. Replication of the object or object part will be retried later.Monitor the remote system to see whether this object or object part is eventually replicated. If the object or object part does not replicate within one week, contact your authorized service provider.Warning
2121Duplicate Elimination service sort startedThe Duplicate Elimination service has started the sort phase of its run.No action is required.Notice
2122Duplicate Elimination service sort finishedThe Duplicate Elimination service successfully finished the sort phase of its run.No action is required.Notice
2123Duplicate Elimination service sort stopped without finishingThe Duplicate Elimination service stopped during its sort phase without completing its run. The service will resume at some point in the future.No action is required.Notice
2124HCP search facility indexing failure.The HCP search facility encountered an object it could not index but will try again at a later date.Contact your authorized service provider.Error
2126Replica capacity limit reachedHCP suspended a replication link due to insufficient capacity on the replica.Add storage capacity to the replica and resume the replication link.Warning
2127Time sync problemThe time on this system is not in sync with the time on the other system in a replication link in which this system participates.Ensure that time is synchronized on all the HCP systems in the replication topology.Warning
2128Collisions occurred on replication linkOne or more collisions occurred on a replication link in the last 24 hours.No action is required.Warning
2129Replication link failed over automaticallyA replication link failed over automatically because communication was disrupted for an extended period of time. The replicated tenants and directories are now read-write on the replica and read-only on the primary system.Redirect client requests to the replica.Notice
2130Replication link failed over automaticallyA replication link failed over automatically because communication was disrupted for an extended period of time.No action is required.Notice
2131Replication link final data recovery started automaticallyFinal data recovery has started automatically on a replication link. The replicated tenants and directories are now read-only on both the primary system and the replica.No action is required.Warning
2132Replication link automatically failed backA replication link failed back automatically.No action is required.Notice
2133Objects in one or more namespaces could not be replicated; will retry laterOne or more objects could not be replicated. Another attempt to replicate these objects will be made later.Monitor the remote system to see whether these objects are eventually replicated. If the objects are not replicated within one week, contact your authorized service provider.Warning
2134Replication link is candidate for auto failoverReplication link is candidate for auto failover because communication is disrupted for an extended period of time.No action is required.Warning
2143Replication link progress checkpoints resetA user set the replication progress checkpoints to a specified time. Replication will begin from this new point in time.No action is required.Warning
2144Replication link rejectedA replication link was rejected.If this event is unexpected, contact your authorized service provider.Warning
2145Replication link final data recovery pass startedThe final data recovery pass has started on a replication link. The replicated tenants and directories are now read-only on both the primary system and the replica.No action is required.Warning
2146Replication link suspended automaticallyA replication link was suspended because of a problem.Ensure that the primary system, the replica, and the network are healthy. Then resume the link.Error
2147Replication adversely affected due to failed network connectionsA front-end network connection is unavailable.Check that the hardware is functioning properly. If a problem exists, contact your authorized service provider.Error
2148Replication automatically paused for a tenant due to errorReplication was automatically paused for a tenant due to a problem from which HCP could not recover by itself.Ensure that the primary system, the replica, and the network are healthy and that no tenant collisions have occurred. Then resume replication for the paused tenant.Error
2149Replication paused for a tenantA user paused replication of a tenant.No action is required.Notice
2150Replication resumed for a tenantA user resumed replication of a tenant.No action is required.Notice
2151Replication link suspended according to scheduleA replication link was suspended according to schedule.No action is required.Notice
2152Replication link performance level changed according to scheduleThe performance level of a replication link changed according to schedule.No action is required.Notice
2153Replication link schedule updatedThe schedule for a replication link was updated.No action is required.Notice
2156Replication has been stopped for this tenantReplication of the tenant was stopped for the indicated reason.If the cause is one or more namespace name collisions, rename each indicated namespace. If the cause is that the replica does not support the DPL of one or more namespaces, lower the DPL of each indicated namespace. Alternatively, in either case, you can deselect the namespace from being replicated. After you make the necessary changes, notify your HCP system administrator that the problem has been resolved.Error
2157Namespace replication collision detectedA namespace replication collision was detected, possibly requiring intervention from the tenant administrator.If the cause is one or more namespace name collisions, rename each indicated namespace. If the cause is that the replica does not support the DPL of one or more namespaces, lower the DPL of each indicated namespace. Alternatively, in either case, you can deselect the namespace from being replicated. After you make the necessary changes, notify your HCP system administrator that the problem has been resolved.Notice
2158Additional top-level directories selected for replicationThe indicated top-level directories were selected for replication.No action is required.Notice
2159One or more top-level directories removed from replicationThe indicated top-level directories were removed from replication.No action is required.Notice
2160User account replicated with collisionsEither or both of two user accounts with the same user ID on a 4.x system were modified on that system, resulting in conflicting values for one or more properties. On replication to this system, the values for those properties were taken from the account with roles.Ensure that the user account is configured correctly.Warning
2161All replication links shut downA user shut down all replication links.No action is required.Notice
2162All replication links reestablishedA user reestablished all replication links.No action is required.Notice
2163Replication stalledReplication stalled while replicating an object or object part.If the problem persists, contact your authorized service provider.Error
2164Replication link failed overA user failed over a replication link.Redirect client requests to this system.Notice
2165Replication link failed overA user failed over a replication link.Redirect client requests to the remote system.Notice
2166Stalled replication link has recoveredPrevious stalled replication has recovered.No action is required.Notice
2167The broken replication link recoveredThe broken replication link has been repaired.No action is required.Notice
2168Replication automatically paused for tenant on link outside active erasure coding topologyA tenant in the active erasure coding topology is also on a replication link that is not part of the topology.Either remove the tenant from the link, or remove the tenant from the active erasure coding topology.Error
2200Storage Tiering service startedThe Storage Tiering service has started.No action is required.Notice
2201Storage Tiering service stopped: run completeThe Storage Tiering service finished successfully.No action is required.Notice
2203Storage Tiering service stopped without finishingThe Storage Tiering service was interrupted without examining all objects.No action is required.Warning
2204Storage Tiering service stopped without finishingThe Storage Tiering service was interrupted without examining all objects.No action is required.Notice
2250Geo-distributed Erasure Coding service startedThe Geo-distributed Erasure Coding service has started.No action is required.Notice
2251Geo-distributed Erasure Coding service stopped: run completeThe Geo-distributed Erasure Coding service finished successfully.No action is required.Notice
2253Geo-distributed Erasure Coding service stopped without finishingThe Geo-distributed Erasure Coding service was interrupted without examining all objects.No action is required.Warning
2254Geo-distributed Erasure Coding service stopped without finishingThe Geo-distributed Erasure Coding service was interrupted without examining all objects.No action is required.Notice
2280S Series Balancing service startedThe S Series Balancing service has started.No action is required.Notice
2281S Series Balancing service stopped: run completeThe S Series Balancing service finished successfully.No action is required.Notice
2282S Series Balancing service stopped without finishingThe S Series Balancing service was interrupted without examining all objects.No action is required.Warning
2283S Series Balancing service stopped without finishingThe S Series Balancing service was interrupted without examining all objects.No action is required.Notice
2300User account createdA user created a user account.No action is required.Notice
2301User account updatedA user updated a user account.No action is required.Notice
2302User account deletedA user deleted a user account.No action is required.Notice
2303User authenticatedA user login to the System Management Console was successfully authenticated.No action is required.Notice
2304Authentication attempt by unknown userA user tried to log in with an unknown username.Have the user log in with a valid username and password.Warning
2305Account reenabled by timerA disabled security user account has been automatically reenabled.No action is required.Notice
2306Account is disabledA user tried to log in with a disabled account.Reenable the user account to allow the user to log in.Warning
2307Account has been inactive for too longA user tried to log in with an account that was disabled due to inactivity.Reenable the user account to allow the user to log in.Warning
2308Account does not include the required rolesA user tried to log in with an account that does not include a required role.Update the account to include the required role to allow the user to log in.Warning
2309Password is invalidA user tried to log in with an invalid password.Have the user log in with a valid username and password.Warning
2310Remote authentication server errorThe login for a remotely authenticated user failed due to an error communicating with a RADIUS server.Check the health of the RADIUS servers and the connections to them. If you cannot detect any problems, contact your authorized service provider.Warning
2311Password changedA user changed the password for a user account.No action is required.Notice
2312Account enabledA user account has been enabled.No action is required.Notice
2313Account disabledA user account has been disabled.No action is required.Notice
2314Account disabled due to too many failed loginsA user account was automatically disabled due to too many failed login attempts.Reenable the user account and have the user log in with a valid username and password.Warning
2315Account will be reenabledA security user account will be reenabled automatically after a waiting period.No action is required.Notice
2316All accounts resetA user reset user accounts to their initial configuration. All accounts have been deleted and the initial accounts have been recreated.No action is required.Warning
2317User authenticatedA user login to the Search Console was successfully authenticated.No action is required.Notice
2319Active Directory server errorA user tried to log in with an invalid Active Directory username or password.Have the user log in with a valid username and password.Warning
2330RADIUS server createdA user configured a new RADIUS server.No action is required.Notice
2331RADIUS server updatedA user updated the configuration of a RADIUS server.No action is required.Notice
2332RADIUS server deletedA user deleted a RADIUS server.No action is required.Notice
2333RADIUS server promotedA user moved a RADIUS server up in the list.No action is required.Notice
2334RADIUS server demotedA user moved a RADIUS server down in the list.No action is required.Notice
2335All RADIUS servers deletedA user deleted all RADIUS servers. The list of RADIUS servers is now empty.No action is required.Warning
2340An exception occurred while removing Service Principal Name from Active DirectoryHCP failed to remove a Service Principal Name from Active Directory.Verify that the Service Principal Name was removed from Active Directory.Warning
2341An exception occurred while removing Service Principal Name from Active DirectoryHCP failed to remove a Service Principal Name from Active Directory.Verify that the Service Principal Name was removed from Active Directory.Warning
2342Successfully added Service Principal Name to Active DirectoryHCP successfully added a Service Principal Name to Active Directory.No action is required.Notice
2344Failed to add Service Principal Name to Active DirectoryHCP failed to add a Service Principal Name to Active Directory.Verify that the Service Principal Name was added to Active Directory.Warning
2346An exception occurred while adding Service Principal Name to Active DirectoryHCP failed to add a Service Principal Name to Active Directory.Verify that the Service Principal Name was added to Active Directory.Warning
2350Group account createdA user created a group account.No action is required.Notice
2352Group account updatedA user updated a group account.No action is required.Notice
2354Group account deletedA user deleted a group account.No action is required.Notice
2356Active Directory SSL certificate downloadedA user downloaded an SSL server certificate for Active Directory.No action is required.Notice
2357Incompatible namespace setting for authenticated CIFSOne or more namespaces are configured for CIFS authenticated access only, but the system is not configured to support authenticated CIFS. As a result, CIFS cannot be used for access to those namespaces.Either enable authenticated CIFS support for the system or have the tenant administrators reconfigure the affected namespaces to support both anonymous and authenticated access with CIFS.Warning
2358Incompatible namespace setting for authenticated CIFSA namespace is configured for CIFS authenticated access only, but the system is not configured to support authenticated CIFS. As a result, CIFS cannot be used for access to that namespace.Reconfigure the affected namespace to support both anonymous and authenticated access with CIFS.Warning
2359Active Directory authentication enabledA user enabled Active Directory authentication for the HCP system.No action is required.Notice
2360Active Directory authentication disabledA user disabled Active Directory authentication for the HCP system.No action is required.Notice
2361Active Directory cache clearedA user cleared the Active Directory cache.No action is required.Notice
2362Active Directory partially configuredCIFS configuration is not complete on the indicated node.Reconfigure support for Active Directory in the System Management Console.Warning
2363Active Directory computer account is invalidThe Active Directory computer account is invalid.Reconfigure support for Active Directory in the System Management Console.Warning
2364Active Directory communication disruptedThe CIFS services are no longer running on the indicated node.Reconfigure support for Active Directory in the System Management Console to restart the CIFS service.Warning
2365Attempt to access the Active Directory server failedA connection issue occurred while the indicated node was trying to access the Active Directory server.No action is required.Warning
2366Active Directory configuration restoredA user updated the Active Directory configuration.No action is required.Notice
2367Active Directory computer account restoredA user updated the Active Directory computer account.No action is required.Notice
2368Active Directory communication restoredThe indicated node can now communicate with the Active Directory server. HCP can again service CIFS requests.No action is required.Notice
2369Communication restored when trying to access the Active Directory serverThe indicated node can now communicate with the Active Directory server.No action is required.Notice
2370Could not establish secure connection to the Active Directory serverThe Active Directory computer account credentials are invalid, or there is no current Active Directory SSL server certificate.Update the Active Directory credentials or SSL server certificate.Notice
2371Secure connection to Active Directory server restoredA user updated the Active Directory computer account credentials or SSL server certificate.No action is required.Notice
2372Active Directory single sign-on misconfiguredThe Active Directory SPN for a tenant and or namespace does not exist.Update the Active Directory single sign-on setting for the tenant and or namespace. For information about which tenants are involved, see the Status section on the Active Directory page in the HCP System Management Console.Warning
2373Active Directory single sign-on restoredThe Active Directory SPN was created for the misconfigured tenants and or namespaces.No action is required.Warning
2375Active Directory service record lookup failedThe Active Directory service record lookup failed for the indicated domain.Check the DNS configuration.Warning
2376Active Directory DNS reverse lookup succeededThe Active Directory DNS reverse lookup succeeded for the indicated domain.No action is required.Notice
2377Active Directory DNS reverse lookup failedThe Active Directory DNS reverse lookup failed for the indicated domain.Check the DNS configuration.Warning
2378Active Directory service records were not found.The Active Directory service records were not found during an Active Directory health check.Check the DNS configuration.Warning
2379Winbind unavailableWinbind was found to be unavailable during an Active Directory health check.Update your Active Directory configuration.Warning
2380Failed to check Active Directory service account and connectivityException occurred while validating service account and connectivity for Active Directory during health check.Check the Active Directory connection and service account.Warning
2381Samba not runningHCP could not get the status of Samba during an Active Directory health check.Update your Active Directory configuration.Warning
2382Missing SPN(s) on Active Directory ServerOne or more tenant/namespace SPN/s are missing from the Active Directory database.Update your Active Directory configuration.Warning
2383Active Directory LDAP service record lookup succeededHCP successfully looked up the LDAP service record for the indicated Active Directory domain.No action is required.Notice
2384Active Directory LDAP service record lookup failedFailed to look up the LDAP service record for Active Directory domain.Check that the DNS server is configured to publish LDAP service records.Warning
2385Active Directory kerberos service record lookup succeededHCP successfully looked up the Kerberos service record for the indicated Active Directory domain.No action is required.Notice
2386Active Directory Kerberos service record lookup failedFailed to look up the Kerberos service record for Active Directory domain.Check that the DNS server is configured to publish Kerberos service record and Kerberos server is running.Warning
2387Active Directory service account creation successfulHCP successfully created an Active Directory service account on the indicated Active Directory server.No action is required.Notice
2388Failed to create Active Directory service accountHCP failed to create the Active Directory service account for the domain.Check that the Active Directory domain user's name and password are correct. Also make sure the domain user has sufficient permissions to create the service account.Warning
2389Active Directory node account createdAn Active Directory node account was successfully created for the indicated node.No action is required.Notice
2390Active Directory has been disabledHCP has disabled Active Directory because a change to the DNS settings affected Active Directory connectivity.No action is required.Notice
2391Failed to disable Active DirectoryA user attempt to disable Active Directory configuration failed.Check that the Active Directory server was running and not already disabled.Warning
2392Active Directory node account deletedActive Directory node account was successfully deleted.No action is required.Notice
2393Active Directory service user password updatedAutomatic password updated because password refresh period elapsed.No action is required.Warning
2394Failed to update Active Directory service user passwordHCP may not have sufficient permissions to update the service user password.Update Active Directory configuration and provide a domain user with sufficient permissions for password update.Warning
2395Successfully removed Service Principal Name from Active Directory.Successfully removed Service Principal Name from the Active Directory.No action is required.Notice
2397Failed to remove Service Principal Name from the Active DirectoryFailed to remove Service Principal Name from the Active Directory.Verify that Active Directory Service Principal Name is cleaned up.Warning
2400New SSL server certificate uploadedA user uploaded an SSL server certificate.No action is required.Notice
2401New SSL server certificate signing request generatedA user requested a new certificate signing request.No action is required.Notice
2402New SSL server certificate generatedA user requested the creation of a new SSL server certificate.No action is required.Notice
2403SSL server certificate expires soonThe SSL server certificate for this system expires soon. If the certificate expires, HTTPS access to the system will fail, and replication will fail.Install a new SSL server certificate with a later expiration date.Warning
2404SSL server certificate expiredThe SSL server certificate for this system has expired. HTTPS access to the system is not allowed, and replication has stopped.Install a new SSL server certificate with a later expiration date.Error
2405Trusted replication server certificate expires soonThe indicated trusted replication server certificate expires soon. If the certificate expires, replication with the system from which the certificate was obtained will fail.When the other system in the replication pair installs a new SSL server certificate, obtain that certificate and upload it to this system as a trusted replication server certificate.Warning
2406Trusted replication server certificate expiredThe indicated trusted replication server certificate has expired. Replication with the system from which the certificate was obtained has stopped.When the other system in the replication pair installs a new SSL server certificate, obtain that certificate and upload it to this system as a trusted replication server certificate.Error
2407Active Directory server certificate expires soonThe Active Directory SSL server certificate expires soon. If the certificate expires, access to the Active Directory server may fail.Install a new Active Directory SSL server certificate with a later expiration date.Warning
2408Active Directory server certificate expiredThe Active Directory SSL server certificate has expired. Access to the Active Directory server may fail.Install a new Active Directory SSL server certificate with a later expiration date.Error
2409SSL server certificate deletedA user deleted an SSL server certificate.No action is required.Notice
2410SSL server certificate signing request downloadedA user downloaded an SSL certificate signing request.No action is required.Notice
2411Active Directory service account deletion successfulHCP successfully deleted an Active Directory service account on the indicated Active Directory server.No action is required.Notice
2412Failed to delete the Active Directory service account for the listed user and organization unit. Received response.The Active Directory server is either unreachable or the service account does not exist.Please manually delete the HCP computer service account from the Active Directory domain it belongs to, if it exists.Warning
2413Failed to join domain and create Active Directory node accountThe Active Directory server is either unreachable or the node account does not exist.Check that the user name and password are correct, and that the server is reachable.Warning
2414Failed to leave domain and delete the Active Directory node account for the listed node. Received response.The Active Directory server is either unreachable or the node account does not exist.Check that the user name and password are correct, and that the server is reachable.Warning
2415Active Directory domain resolution successfulHCP successfully resolved an Active Directory domain.No action is required.Notice
2416Active Directory domain resolution failedThe DNS server may not be configured to return Active Directory server IP addresses.Check that the DNS server is configured to resolve domain name of the Active Directory server.Warning
2417Active Directory domain join failedThe Active Directory domain may be unreachable, or the user account may be invalid.Check that the KDC, LDAP, and Global Catalog servers are running on the domain controller, and that the service account is valid.Warning
2418An error occured while communicating with Active DirectoryThe Active Directory domain may be unreachable, or the service user account may be invalid.Check that the service account is valid and the Active Directory server is reachable.Warning
2500PGP private key uploadedA user uploaded a PGP private key.No action is required.Notice
2501PGP encryption key uploadedA user uploaded a PGP encryption key.No action is required.Notice
2502PGP key deletedA user deleted a PGP private or encryption key.No action is required.Notice
2600Node shutdown requested from System Management ConsoleA user shut down a node from the System Management Console.No action is required.Notice
2601HCP shutdown requested from System Management ConsoleA user shut down HCP from the System Management Console.No action is required.Notice
2602Service startedA user started a service from the System Management Console.No action is required.Notice
2603Service stoppedA user stopped a service from the System Management Console.No action is required.Notice
2604Service enabledA user enabled a service from the System Management Console.No action is required.Notice
2605Service disabledA user disabled a service from the System Management Console.No action is required.Notice
2606Configuration changedA user changed a configuration value of an HCP component.No action is required.Notice
2607Version upgradedA user completed a software upgrade by updating the internal messaging version.No action is required.Notice
2609Irreparable object acknowledgedA user acknowledged an irreparable object.No action is required.Warning
2610All irreparable objects acknowledgedA user acknowledged all irreparable objects.No action is required.Warning
2611Eject CD requested from System Management ConsoleA user requested the ejection of the CD tray from a node.No action is required.Notice
2614Unauthorized actionA user has requested an operation that is not authorized for the user account.If the user should be allowed to perform this operation, add the required role to the user account.Warning
2615Configuration changedA user changed a configuration value of an HCP component.No action is required.Notice
2616Upgrade startedA user has started an upgrade of the HCP software.No action is required.Notice
2617Node restart requested from System Management ConsoleA user restarted a node from the System Management Console.No action is required.Notice
2618HCP restart requested from System Management ConsoleA user restarted HCP from the System Management Console.No action is required.Notice
2619Restart or shutdown command could not be executedAn attempt to restart or shut down a node was could not be executed. The node may already be down.No action is required.Notice
2620Upgrade completed successfullyAn upgrade of the HCP software completed successfully.No action is required.Notice
2626Unavailable object detectedHCP detected unavailable objects.This state is often caused by a temporary outage and should be resolved within 24 hours.Warning
2630Support access credentials installedA request to install exclusive Hitachi Vantara Support access credentials succeeded.No action is required.Notice
2631Failed to apply Support access credentialsFailed to apply exclusive Hitachi Vantara Support access credentials due to an internal software error.Retry the operation. If the problem persists, contact your authorized service provider.Error
2632Support access credentials revokedA request to revoke exclusive Hitachi Vantara Support access credentials succeeded.No action is required.Warning
2633Failed to revoke exclusive Support access credentialsFailed to revoke exclusive Hitachi Vantara Support access credentials due to an internal software error.Retry the operation. If the problem persists, contact your authorized service provider.Error
2700Simple search query performedA user performed a simple search.No action is required.Notice
2701Advanced search query performedA user performed an advanced search.No action is required.Notice
2706Search facility configuration changedA user changed the search facility configuration.No action is required.Notice
2707Search Console disabledA user changed the search facility selection for the Search Console to none, thereby disabling the ability to perform searches in that Console.No action is required.Notice
2800Network interface downA network interface went down.Check that the hardware is functioning properly. If a problem exists, contact your authorized service provider.Error
2801Network interface upA network interface came up.No action is required.Notice
2802Temperature sensor alarmA temperature sensor is reporting a temperature that is out of the recommended range.Check that the hardware is functioning properly. If a problem exists, contact your authorized service provider.Error
2803Temperature sensor alarm removedA temperature sensor is reporting a return to an acceptable operating temperature.No action is required.Notice
2804Fan sensor alarmA fan sensor is reporting a fan speed that is out of the recommended range.Check that the hardware is functioning properly. If a problem exists, contact your authorized service provider.Error
2805Fan sensor alarm removedA fan sensor is reporting a return to an acceptable fan speed.No action is required.Notice
2806Voltage sensor alarmA voltage sensor is reporting a voltage that is out of the recommended range.Check that the hardware is functioning properly. If a problem exists, contact your authorized service provider.Error
2807Voltage sensor alarm removedA voltage sensor is reporting a return to an acceptable operating voltage.No action is required.Notice
2808File system alarmA file system has reached the capacity warning threshold.Consider adding storage capacity to the HCP system before the amount of free storage becomes critically low.Error
2809File system alarm removedA file system has fallen below the capacity warning threshold.No action is required.Notice
2810Disk device alarmA disk device is reporting that it is not in a fully functional state.Check that the hardware is functioning properly. If a problem exists, contact your authorized service provider.Error
2811Disk device alarm removedA disk device is reporting that it has returned to a fully functional state.No action is required.Notice
2812Power supply alarmA power supply is indicating a problem.Check that the hardware is functioning properly. If a problem exists, contact your authorized service provider.Error
2813Power supply alarm removedA power supply is reporting that it has returned to a fully functional state.No action is required.Notice
2814Processor alarmA processor is indicating a problem.Check that the hardware is functioning properly. If a problem exists, contact your authorized service provider.Error
2815Processor alarm removedA processor is reporting that it has returned to a fully functional state.No action is required.Notice
2816Multipath degradedRedundant fibre channel connections to storage are not functioning correctly.Check the connections to the storage. If a problem exists, contact your authorized service provider.Error
2817Multipath restoredRedundant access to the underlying storage has been restored.No action is required.Notice
2818Failure trimming one or more volumesAttempt to trim one or more volumes failed.Check that the hardware is functioning properly. If a problem exists, contact your authorized service provider.Warning
2819SSD RAID is degradedAn SSD device went downCheck that the hardware is functioning properly. If a problem exists, contact your authorized service providerError
2820IP configuration information changedA user changed network configuration settings through the System Management Console.No action is required.Notice
2830Time is unsynchronizedNeither the external nor internal time servers could be reached for synchronization.Check that network and time settings are correct.Warning
2831Using internal time serverThe external time server could not be reached for synchronization.If your system is configured to use the internal time server, no action is required. Otherwise, check that network and time settings are correct.Notice
2832Using external time serverThe external time server was successfully contacted for synchronization.No action is required.Notice
2833Lost connection to external time serverThe external time server could not be contacted for synchronization.Check that network and time settings are correct.Notice
2834System time changed due to resynchronization with external time serverWhen HCP started, the system time was resynchronized to an external time server because the system time was off by more than 1000 seconds. This time change may affect object retention.Check that network and time settings are correct.Warning
2835Battery backup unit failedA battery backup unit sensor is reporting that a BBU has failed.Check that the hardware is functioning properly. If a problem exists, contact your authorized service provider.Error
2836Battery backup unit restoredA battery backup unit sensor is reporting that a BBU has returned to a fully functional state.No action is required.Notice
2837Battery backup unit degradedA battery backup unit sensor is reporting that the BBU is degraded.Check that the hardware is functioning properly. If a problem exists, contact your authorized service provider.Error
2838Battery backup unit diagnostic running.A battery backup unit is running diagnostics.No action is required.Warning
2839Battery backup unit diagnostic finished.A battery backup unit has finished running diagnostics.No action is required.Notice
2840Battery backup unit failed. A battery backup unit sensor is reporting that a BBU has failed.Check whether the hardware is functioning properly. If a problem exists, contact your authorized service provider.Error
2841Battery backup unit restored.A battery backup unit sensor is reporting that a BBU has returned to a fully functional state.No action is required.Notice
2842Battery backup unit degraded.A battery backup unit sensor is reporting that the BBU is degraded.Check whether the hardware is functioning properly. If a problem exists, contact your authorized service provider.Error
2843Front-end Ethernet communication errorA network switch may have become unavailable.Check that the hardware is functioning properly. If a problem exists, contact your authorized service provider.Error
2844Front-end Ethernet communication restoredThe front-end Ethernet interface has returned to a normal state.No action is required.Notice
2845Network interface degradedEither the network interfaces in a bonded network interface are not operating at the same speed, or they are not operating at the requested speed.Check that the hardware is functioning properly. If the problem persists, contact your authorized service provider.Error
2846Network interface recoveredA network interface is now operating correctly.No action is required.Notice
2847Network interface not functioning properlyEither a network interface is missing, or a network interface exists on a node with no IP address assigned.Check that the physical network is functioning properly. If it is, try resetting the network. If the problem persists, contact your authorized service provider.Error
2848Network interface recoveredA network interface is now operating correctly.No action is required.Notice
2849Network interface degradedA network interface is not operating at the requested MTU.Check that the hardware is functioning properly. If it is, try resetting the network. If the problem persists, contact your authorized service provider.Error
2850Network interface recoveredA network interface is now operating correctly.No action is required.Notice
2851Front-end IPv6 communication errorA network switch may have become unavailable, or IPv6 may not be functioning on the indicated interface.Check that the hardware is functioning properly. If a problem exists, contact your authorized service provider.Error
2852Front-end IPv6 communication restoredIPv6 communication through the indicated front-end Ethernet interface has been restored.No action is required.Notice
2853High load alarmThe node is experiencing a heavy load.Please contact your authorized HCP service provider.Notice
2854High load alarm removedThe node is no longer experiencing a heavy load.No action is required.Notice
2855Insufficient quantity of RAM installedA node with an insufficient quantity of RAM for this software version may result in performance degradation and node failures.Install the recommended amount of RAM on this node.Warning
2856Sufficient quantity of RAM installedThe node has the recommended amount of RAM installed.No action is required.Notice
2857Disk swap alarmThe node is experiencing a high rate of page swapping.Please contact your authorized HCP service provider.Notice
2858Disk swap alarm removedThe node is no longer experiencing a high rate of page swapping.No action is required.Notice
2860SSD RAID rebuildingSSD RAID is rebuilding.No action is requiredWarning
2861SSD storage capacity warningThe amount of free SSD storage on the HCP storage nodes is low.Please contact your authorized HCP service provider.Warning
2862SSD storage capacity criticalThe amount of free SSD storage on the HCP storage nodes is critically low.Please contact your authorized HCP service provider.Error
2863SSD RAID storage capacity expanded.An SSD device has finished storage expansion.No action is required.Notice
2870SSD near end-of-life warning.An SSD is near the end of its expected life span.Contact your authorized service provider.Warning
2871SSD at end of life.An SSD is at the end of its expected life span.Contact your authorized service provider.Warning
2872SSD no longer near end of life.An SSD is no longer near the end of its expected life span.No action is required.Notice
2910Retention class missingHCP system detected a missing retention class.Contact your authorized service provider.Error
3000System updatedHCP system properties have been updated.No action is required.Notice
3001Tenant createdA user created a tenant.No action is required.Notice
3002Tenant updatedA user updated a tenant.No action is required.Notice
3003Tenant deletedA user deleted a tenant.No action is required.Notice
3007Namespace purgedA user purged a namespace.No action is required.Notice
3026Tenant over soft quotaThe amount of storage used by all namespaces owned by a tenant exceeds the soft quota configured for the tenant.Contact the tenant administrator about increasing the hard quota for the tenant.Warning
3027Tenant under soft quotaThe amount of storage used by all namespaces owned by a tenant is under the soft quota configured for the tenant.No action is required.Warning
3029Installed new HCP versionA new version of the HCP software was successfully installed.No action is required.Notice
3030Tenant at namespace quotaThe number of namespaces owned by the tenant is equal to the namespace quota for the tenant.No action is required.Warning
3031Tenant over namespace quotaThe number of namespaces owned by the tenant is greater than the namespace quota for the tenant.Either increase the namespace quota for the tenant or have the tenant administrator delete one or more namespaces.Warning
3034Namespace maximum reachedThe current number of namespaces is the maximum allowed for the HCP system.No action is required.Warning
3035Namespace maximum exceededThe current number of namespaces is greater than the maximum allowed for the HCP system.Have the administrators for one or more tenants delete one or more namespaces to reduce the total number of namespaces to at or below the maximum allowed for the HCP system.Warning
3036Username conflictThe indicated tenant has multiple user accounts with the same name. For any given tenant, all user accounts must have a unique username.Have the administrator for the tenant rename one account or merge duplicate accounts together.Warning
3038Minimum data access permissions updatedThe minimum data access permissions for a namespace have been updated.No action is required.Notice
3500Running migrationThe Migration service has begun migrating data.No action is required.Notice
3501Migration completeThe Migration service has completed the data migration.To remove the decommissioned hardware, contact your authorized service provider.Notice
3502Pausing migrationA user paused the data migration.No action is required.Notice
3503Preparing migrationThe Migration service has begun preparing to migrate data.No action is required.Notice
3504Verifying migrationThe Migration service has begun verifying the data migration.No action is required.Notice
3505Migration service stoppedThe Migration service is no longer running.No action is required.Notice
3506Migration service performance level updatedA user changed the Migration service performance level.No action is required.Notice
3507Migration description updatedA user changed the migration description.No action is required.Notice
3509Migration service: irreparable object or object partThe Migration service was unable to migrate an object or object part and has marked it irreparable.Contact your authorized service provider.Error
3510Pausing migrationThe Migration service automatically paused the data migration because the HCP system does not have enough available space for the objects being migrated.Contact your authorized service provider.Error
3511Error completing migrationThe Migration service encountered an unrecoverable error while trying to complete the data migration.Contact your authorized service provider.Error
4103Failure creating HCP search facility index for a namespace.The HCP search facility could not create the index for a namespace. No action is required.Warning
4104Failure deleting HCP search facility index for a namespace.The HCP search facility could not delete the index for a namespace. Contact your authorized service provider.Warning
4105Failure creating HCP search facility index for a namespace.The HCP search facility could not create the index for a namespace but will try again later.No action is required. If this situation persists, contact your authorized service provider.Warning
4106Ingest-time override setting has been changedThe ingest-time override setting was changed.No action is required.Warning
4107Chassis communication errorHCP cannot communicate with the indicated chassis through SNMP.Check network connectivity to the chassis. Also check that the chassis is configured to accept SNMP requests from the lowest-numbered available storage node in the HCP system.Error
4108Communication from unknown nodeNodes from another HCP system were detected on the network.Check the back-end network. A back-end network can support only one HCP system.Error
4109Communication from node at previous versionNodes from another HCP version were detected on the network, and no upgrade is in process.Check the back-end network. A back-end network can support only one HCP system.Error
4110Metadata query engine indexing startedA user enabled metadata query engine indexing.No action is required.Notice
4111Metadata query engine indexing stoppedA user disabled metadata query engine indexing.No action is required.Warning
4112Metadata query engine is availableThe metadata query engine is running on the indicated node.No action is required.Notice
4113Metadata query engine is not availableThe metadata query engine is not running on the indicated node. As a result, the query API is unavailable for object-based queries. If the Search Console is using the query engine, searching through the Console is also unavailable.No action is required. If this situation persists, contact your authorized service provider.Warning
4116Metadata query engine index capacity warningThe size of the metadata query engine index has reached a warning threshold.Increase the maximum size allowed for the metadata query engine index.Warning
4117Metadata query engine index capacity errorThe size of the metadata query engine index has reached an error threshold.Increase the maximum size allowed for the metadata query engine index.Error
4118Metadata query engine index capacity reachedThe size of the metadata query engine index has reached the maximum threshold.Increase the maximum size allowed for the metadata query engine index.Error
4119Metadata query engine index partially unavailablePart of the metadata query engine index is unavailable due to one or more logical volumes being unavailable. Indexing is temporarily paused, and queries cannot be serviced.Make the unavailable logical volumes available. Alternatively, rebuild the index by first deleting it and then reenabling indexing. Note that rebuilding the index can take a significant amount of time.Error
4120Metadata query engine out of memory for indexingNo more memory is available for metadata query engine indexing. Indexing was automatically disabled.Add memory to the system by adding nodes or upgrading existing nodes. Then reenable metadata query engine indexing.Error
4129Objects in namespace could not be replicated; will retry laterOne or more objects could not be replicated. Another attempt to replicate these objects will be made later.Monitor the remote system to see whether these objects are eventually replicated. If the objects are not replicated within one week, contact your authorized service provider.Warning
4200RAID group spun downA RAID group was spun down.No action is required.Notice
4201RAID group spun upA RAID group was spun up.No action is required.Notice
4202Error spinning down RAID groupAn error occurred while spinning down a RAID group.Contact your authorized service provider.Error
4203Error spinning up RAID groupAn error occurred while spinning up a RAID group.Contact your authorized service provider.Error
4204Back-end switch communication failureA back-end switch is not communicating with HCP.Check that the switch is functioning properly. If the problem persists, contact your authorized service provider.Error
4205Back-end switch failureA back-end switch is reporting a problem.Check that the switch is functioning properly. If the problem persists, contact your authorized service provider.Error
4206Back-end switch restoredA back-end switch is reporting a return to a functional state.No action is required.Notice
4207Objects read from spindown storageFor the indicated tenant, one or more clients read objects from spindown storage.Ensure that the service plan in use is appropriate for the data usage pattern.Notice
4208Objects read from spindown storageFor the indicated namespace, one or more clients read objects from spindown storage.Ensure that the service plan in use is appropriate for the data usage pattern.Notice
4209Time server changedA user changed the time server for the HCP system.No action is required.Notice
4210Current time changedA user changed the current time for the HCP system.No action is required.Notice
4211Time zone changedA user changed the time zone for the HCP system.No action is required.Notice
4212Service plan createdA user created a service plan.No action is required.Notice
4213Service plan updatedA user updated a service plan.No action is required.Notice
4214Service plan deletedA user deleted a service plan.No action is required.Notice
4215Failover completedA node in a cross-mapped pair became unavailable. The other node in the pair has finished taking over management of the logical volumes previously managed by the unavailable node.No action is required.Warning
4216Failback startedA previously unavailable node in a cross-mapped pair has become available again and has begun the process of taking back management of its logical volumes from the other node in the pair.No action is required.Warning
4217Failback completedA node in a cross-mapped pair has finished taking back management of its logical volumes, which had previously failed over to the other node in the pair.No action is required.Notice
4218Monitored component addedA user added a monitored component.No action is required.Notice
4219Monitored component deletedA user deleted a monitored component.No action is required.Notice
4221Tenant tags updatedA user updated the tags for a tenant.No action is required.Notice
4222Time settings compliance mode changedA user changed the time settings compliance mode for the HCP system.No action is required.Notice
4223Failover completedA node in a cross-mapped pair became unavailable. The other node in the pair has finished taking over management of the logical volumes previously managed by the unavailable node.No action is required.Warning
4224Failback startedA previously unavailable node in a cross-mapped pair has become available again and has begun the process of taking back management of its logical volumes from the other node in the pair.No action is required.Notice
5000Time is unsynchronized between nodesThe HCP system detected an issue while checking the times on the nodes.Contact your authorized service provider.Warning
5100Network createdA user created a network.No action is required.Notice
5101Network updatedA user updated a network.No action is required.Notice
5102Network deletedA user deleted a network.No action is required.Notice
5103Network alias createdA user created a network alias.No action is required.Notice
5104Network alias updatedA user updated a network alias.No action is required.Notice
5105Network alias deletedA user deleted a network alias.No action is required.Notice
5106Network IP address assigned to nodeA user assigned a network IP address to a node.No action is required.Notice
5107Node IP address changedA user changed a network IP address for a node.No action is required.Notice
5108Network IP address removed from nodeA user removed a network IP address from a node.No action is required.Notice
5109Network resetA user reset a network.No action is required.Notice
5110Domain createdA user created a domain.No action is required.Notice
5111Domain deletedA user deleted a domain.No action is required.Notice
5112Network status changedThe status of a network changed due to one or more node IP addresses being added or removed.No action is required.Notice
5113Replication network changedA user chose a new replication network.No action is required.Notice
5114Domain renamedA user renamed a domain.No action is required.Notice
5115Objects read from external storageFor the indicated tenant, one or more clients read objects from external storage.Ensure that the service plan in use is appropriate for the data usage pattern.Notice
5116Objects read from external storageFor the indicated namespace, one or more clients read objects from external storage.Ensure that the service plan in use is appropriate for the data usage pattern.Notice
5117System IP mode updatedA user updated advanced network settings.No action is required.Notice
5118Virtual network management updatedA user updated advanced network settings.No action is required.Notice
5119Failure accessing cloud storageThe HCP system encountered errors while accessing cloud storage.Check network connectivity to the cloud storage. Also check account credentials and permissions.Warning
5120Service plans created during upgradeNew retired service plans were created during upgrade to satisfy namespace DPL requirements.Review your service plans.Notice
5121Running retirementThe retirement service has begun storage volume retirement.No action is required.Notice
5122Retirement service performance level updatedA user changed the retirement service performance level.No action is required.Notice
5123Pausing retirementA user paused the retirement service.No action is required.Notice
5124Retirement service offThe retirement service is no longer running.No action is required.Notice
5125HCP S Series Node warning message receivedThe component may not be functioning correctly.Check that the HCP S Series Node is functioning properly. If a problem exists, contact your authorized service provider.Warning
5126HCP S Series Node error message receivedThe component may not be functioning correctly.Check that the HCP S Series Node is functioning properly. If a problem exists, contact your authorized service provider.Error
5127Downstream DNS mode updatedA user updated downstream DNS mode.No action is required.Notice
5128DNS server configuration reverted to BASIC Downstream DNS mode configuration.System detected invalid DNS server configuration at reboot and reverted to BASIC Downstream DNS mode configuration.Verify that Downstream DNS configuration for all front-end networks is correct.Error
5129Failure accessing cloud storageThe HCP system encountered errors while accessing cloud storage.Check network connectivity to the cloud storage. Also check account credentials and permissions.Warning
5130Storage retirement canceledA user canceled a storage retirement operation.No action is required.Notice
5200Default protocol optimization setting updatedA user updated the default protocol optimization setting.No action is required.Notice
5201Namespaces optimizedA user optimized namespaces for cloud protocols.No action is required.Notice
5202Default directory usage setting updated.Default directory usage setting has been updated.No action is required.Notice
5301Storage space reclamation failedError encountered during trimming operationCheck that the data LUNs support trimming and are configured properly.Warning
5400Erasure coding topology createdA user created an erasure coding topology.No action is required.Notice
5401Erasure coding topology updatedA user updated an erasure coding topology.No action is required.Notice
5402Erasure coding topology deletedAn erasure coding topology has been deleted.If this event is unexpected, contact your authorized service provider.Notice
5403Erasure coding topology protection status changedSome or all of the tenants in the erasure coding topology are not replicating to all systems in the topology.Check the status of the replication links in the erasure coding topology.Error
5404Erasure coding topology protection status changedAn additional replication link failure could result in some or all tenants not replicating to all systems in the erasure coding topology.Check the status of the replication links in the erasure coding topology.Warning
5405Erasure coding topology protection status changedAll tenants in the erasure coding topology are now replicating to all systems in the topology.No action is required.Notice
5406Erasure coding topology read status changedErasure-coded objects in the erasure coding topology cannot be read.Check the status of the replication links in the erasure coding topology.Error
5407Erasure coding topology read status changedAn additional replication link failure could result in the inability to read erasure-coded objects.Check the status of the replication links in the erasure coding topology.Warning
5408Erasure coding topology read status changedErasure-coded objects in the erasure coding topology can now be read.No action is required.Notice
5409Replication paused for tenant in erasure coding topologyThe erasure coding topology includes a tenant for which replication was paused either automatically or by a user.Resume replication of the tenant.Warning
5410Replication paused for tenants in erasure coding topologyThe erasure coding topology includes tenants for which replication was paused either automatically or by a user.Resume replication of the tenants.Warning
5411Replication no longer paused for tenants in erasure coding topologyAll tenants in the erasure coding topology are now replicating.No action is required.Notice
5412Erasure coding topology replication link not foundA replication link in the erasure coding topology could not be found.Recover the missing replication link.Error
5413Erasure coding topology replication links not foundReplication links in the erasure coding topology could not be found.Recover the missing replication links.Error
5414Erasure coding topology replication links no longer missingAll missing links in the erasure coding topology were recovered.No action is required.Notice
5415Tenant in erasure coding topology not on replication linkA tenant was not automatically added to a replication link in the erasure coding topology.Add the tenant to the replication link.Error
5416Tenants in erasure coding topology not on replication linkTenants were not automatically added to a replication link in the erasure coding topology.Add the tenants to the replication link.Error
5417Tenants added to erasure coding topology replication linkAll tenants in the erasure coding topology are on the replication link.No action is required.Notice
6001Replication verification setting changedReplication verification setting was changedNo action is required.Notice
6002Replication verification run completeReplication verification run completed successfully.No action is required.Notice
6003Nonreplicating objectAn object could not be replicated because it is open, irreparable, or unavailable.Contact your authorized service provider.Error

 

  • Was this article helpful?