Skip to main content
Hitachi Vantara Knowledge

Tenant Overview page alerts

  • Conflicting user accounts

    GUID-1FC6F07A-3CDA-4142-83EA-25A2730624C7-low.png

    Two or more user accounts have the same username. This can happen after an upgrade if, before the upgrade occurred, a user account and a data access account (created in an HCP release earlier than 5.0) had the same username. Resolve the conflict by merging or separating the conflicting accounts on the Users page in the Tenant Management Console.

  • Irreparable and unavailable objects

    GUID-30BC43AA-54E3-4128-BBE1-EEB4B18B1791-low.png

    One or more of the tenant's namespaces contain irreparable objects, and one or more of the tenant's namespaces contain unavailable objects. Please contact your HCP system administrator.

    To see which objects are irreparable, go to the Irreparable Objects panel for the applicable namespaces.

  • Irreparable objects

    GUID-30BC43AA-54E3-4128-BBE1-EEB4B18B1791-low.png

    One or more of the tenant's namespaces contain irreparable objects. Please contact your HCP system administrator.

    To see which objects are irreparable, go to the Irreparable Objects panel for the applicable namespaces.

  • Nonreplicating objects

    GUID-6A9BAF5C-E41C-4E64-8E01-8D969A358249-low.png

    The namespace contains objects that are not replicating. Please contact your HCP system administrator.

  • Soft quota exceeded

    GUID-48D82D23-D440-4240-83CE-A93F28A63FB6-low.png

    The amount of storage used by all the tenant's namespaces exceeds the soft quota configured for the tenant. Consider deleting some objects from the namespaces or requesting an increase in the hard quota for the tenant.

  • Tenant has namespace-count namespace(s) configured for CIFS with authenticated access only, but CIFS authenticated access is not currently supported

    GUID-D671CB43-C3EE-41AF-8131-32BB171CCFA3-low.png

    One or more of the tenant's namespaces are configured for CIFS authenticated access only, but the system is not configured to support the use of authenticated CIFS. As a result, CIFS cannot be used for access to those namespaces.

    Reconfigure the affected namespace(s) to support both anonymous and authenticated access with CIFS.

  • Tenant with DPL 1 namespaces that are not replicating

    GUID-AB6B07F9-B23C-4FA5-8138-A08F22BB2416-low.png

    The tenant owns one or more namespaces that have a DPL of 1 (one) and are not being replicated. All HCP namespaces with a DPL of 1 should be replicated to ensure that the stored data is protected. If replication is not available, increase the DPL of the affected namespaces.

    This alert appears only in HCP systems in which setting the DPL to one for a namespace can leave objects unprotected.

  • Unavailable objects

    GUID-30BC43AA-54E3-4128-BBE1-EEB4B18B1791-low.png

    One or more of the tenant's namespaces contain unavailable objects. Please contact your HCP system administrator.

 

  • Was this article helpful?