Skip to main content
Hitachi Vantara Knowledge

Configuring Windows Internet Explorer for single sign-on

Before you set up single sign-on, you need to configure Windows Internet Explorer. The following instructions apply with Windows Internet Explorer 11.

Procedure

  1. Open Internet Explorer.

  2. On the Tools menu, click Internet Options.

  3. In the Internet Options window, click the Security tab.

  4. On the Security page, select Local intranet.

  5. Click Sites.

  6. In the Local intranet window, ensure that all the options are selected.

  7. Click Advanced.

  8. In the Add this website to the zone field, take either of these actions:

    • To enable single sign-on with HTTP, type:
      http://*.hcp-name.domain-name

      For example:

      http://*.hcp.example.com
    • To enable single sign-on with HTTPS, type:
      https://*.hcp-name.domain-name

      For example:

      https://*.hcp.example.com
  9. Click Add.

  10. Click Close.

  11. In the Local intranet window, click OK.

  12. In the Internet Options window, click the Advanced tab.

  13. In the Settings list, under Security, select Enable Integrated Windows Authentication.

  14. Click OK.

  15. Close Internet Explorer.

 

  • Was this article helpful?