Skip to main content
Hitachi Vantara Knowledge

Troubleshooting Fibre Channel switch functionality failures

Use the following guidelines and suggested steps to help resolve common UCP Advisor Fibre Channel switch issues.

  • Condition:

    Add FC switch throws functionality error. Error - Failed to get FC network switch status information. This functionality or a part of it is not supported for this device. Authentication failed. Please check your username and password.

  • What it means:

    The SNMP config SNMPV1 might be disabled.

  • Corrective action:

    Login to the Fibre Channel switch using SSH, then run the following command:

snmpconfig --enable snmpv1