Skip to main content

We've Moved!

Product Documentation has moved to docs.hitachivantara.com
Hitachi Vantara Knowledge

Adding HCP S sources

To monitor an HCP S system, you need to add it as a source to HCM and select the signals you're interested in. Each signal gives different information about the source and needs to be configured separately on the source.

HCP S sources differ from HCP sources in that users are not provided Analytics or Forecasting options and users can only choose between the MAPI or syslog signals.

Note
  • When a MAPI signal is selected, the premade Resources dashboard is displayed.
  • When a syslog signal is selected, the premade Application Breakdown and Application Load dashboards are displayed.

To add an HCP S source:

Procedure

  1. Click the Sources tab.

  2. Click + on the Sources tab.

  3. From the Configure New Source > Source menu, select HCP S Source.

  4. Configure the settings and signals for the source you want to monitor.

  5. When you are finished customizing your source, click Continue.

    The Preview Visualizations page loads and displays the associated visualizations.
  6. When you are finished previewing your visualizations, click Continue.

  7. Review your source configuration and then click Create.

    HCM starts monitoring your source and displaying information about it on the Dashboards page. See Dashboards and visualizations.

 

  • Was this article helpful?