To create an SNMP trap notification:
Select the Configuration window.
In the Type field, select SNMP Trap.
Enter a name for the notification rule.
Under SNMP Trap settings, click Enable to enable the rule.
Configure the settings for the notification rule.
Specify a severity filter for the notification rule.
SNMP trap notification rule settings
When you create an SNMP trap notification rule, the system sends notifications of system events via SNMP traps.
- Enable: Turns on SNMP trap notifications
- Host: The hostname or IP address of the SNMP trap receiver
- Port: The port of the SNMP trap receiver
- Facility: Category for the messages sent by this notification rule
You use the SNMP trap notification message settings to configure a template for formatting all SNMP trap notifications sent by this notification rule.
|$severity||Event severity: INFO, WARNING, or SEVERITY|
|$subject||A short description of the event|
|$message||Event message text|
|$time||Time at which the event occurred|
|$userName||Name of the user responsible for the event|
|$subsystem||Category for the component affected by the event|
|$objectId||Unique identifier for component affected by the event|
|$objectType||The type of the component affected by the event.|
|$objectSourceId||Unique identifier of the internal system component or process that was the source of the event. Value is [unknown] for most events.|
|$objectSourceType||Type of the internal system component or process that was the source of the event. Value is [unknown] for most events.|
The event severity level to use when triggering SNMP trap notifications. Can be one or more of the following: INFO, WARNING, or SEVERITY.
Related CLI commands
Related REST API methods
You can get help on specific REST API methods for the Admin App at REST API - Admin.