Windows DLMgetras Utility

Note: The DLMgetras utility is integrated into the Windows Getconfig script so there is no need to run this script if you run Getconfig.

The DLMGetras command was designed to be used from a command prompt.

i.e. START --> RUN --> cmd 
C:\

Format 
DLMgetras {folder-to-which-collected-information-is-output [-eventlogsize log-size |-eventlogtime yyyy/mm/dd] |-h}

Description 
The error information collection utility collects information, such as trace files, definition files, core files, OS information, and libraries, required for analyzing errors that occur in HDLM.

Parameters

-folder-to-which-collected-information-is-output 
Specify the output folder for the information that is to be collected by the utility for collecting error information. The output-destination folders are created in the specified folder, and the information is collected in the output-destination folders.

-eventlogsize log-size 
The utility obtains logs from each application, system, and security event log. The logs are obtained, starting from the most recent log, until the log size reaches logsize. Specify the log size in MB. The specifiable value ranges from 1 to 4096 in units of 1 MB. You cannot use this parameter together with the -eventlogtime yyyy/mm/dd parameter.

-eventlogtime yyyy/mm/dd 
The utility obtains logs from each application, system, and security event log. The logs obtained are those output after 00:00 on the date yyyy/mm/dd. Specify the date in the YYYY/MM/DD format. You cannot use this parameter together with the - eventlogsize log-size parameter.

-h 
Displays the format of the DLMgetras utility.

 

 

Upload data output to TUF :

https://tuf.hitachivantara.com/upload.php