Skip to main content
Hitachi Vantara Knowledge

How to Setup WWN Monitoring for Performance Monitor and Export Tool

 

Objective

To setup the storage Performance Monitor so that IO & Transfer rates and response times can be broken down by HBA WWN. 

Environment

  • Virtual Storage Platform (VSP) E Series
    • VSP E990
  • VSP 5000 Series
    • VSP 5100, VSP 5100H, VSP 5500, VSP 5500H
  • VSP G130 G/F350 G/F370 G/F700 G/F900
    • VSP G130, G350, G370, G700, G900
    • VSP F350, F370, F700, F900
  • VSP G1X00 and VSP F1500
    • Virtual Storage Platform G1000 (VSP G1000)
    • Virtual Storage Platform G1500 (VSP G1500)
    • Virtual Storage Platform F1500 (VSP F1500)
  • VSP Gx00 and VSP Fx00
    • Virtual Storage Platform Gx00 (VSP Gx00): VSP G200, VSP G400, VSP G600, VSP G800
    • Virtual Storage Platform Fx00 (VSP Fx00): VSP F400, VSP F600, VSP F800
  • RAID performance
  • Export tool

Procedure

  1. In Analytics, Performance Monitor use the Monitored WWN window to add the Unmonitored WWN to the Monitored list for each port.
    • See different SVOS versions "Monitoring WWNs" sections: 
  1. It is VERY IMPORTANT to edit the WWN nicknames to make it possible for easy identification of the HBA.
  • Instructions are within the same section as the WWN Monitor details linked above.
    • For example good informative nicknames would be:

serverA-hba0-fabricE
serverA-hba1-fabricO

serverB-hba1-fabricE
serverB-hba2-fabricO
etc...

  1. From the point in time onwards that monitoring is setup the export data should now contain a breakdown of the WWN usage. 
    • You may have to change the export tool command.txt script to collect WWN details (See additional notes below).

Additional Notes

  • Also note the export command scripts must include these stanzas to collect the WWN usage details:

group PortWWN ; Stats for HBAs connected to ports.
group PPCGWWN ; Stats about HBAs