Skip to main content
Hitachi Vantara Knowledge

Hitachi Command Suite Server Data Collection

Hitachi Command Suite Server Logs

Hitachi Command Suite (HSCS) was previously known as the HiCommand suite. For HDvM, HTnM, HTSM, HRpM or HGLAM, issue the hcmdsgetlogs command.

Manual Data Collection

The following examples assume a default installation. Adjust these commands if you have installed the software somewhere else.

HiCommand Products 7.x and earlier (default locations)

Windows:

  • cd "Program Files (x86)\HiCommand\Base\bin"
  • hcmdsgetlogs /dir <output dir>

Unix:

  • # /opt/HiCommand/Base/bin/hcmdsgetlogs -dir <output dir>
HiCommand Products 8.x (default locations)

Windows:

  • cd "Program Files\HiCommand\Base64\bin"
  • hcmds64getlogs /dir <output dir>

Unix:

  • # /opt/HiCommand/Base64/bin/hcmds64getlogs -dir <output dir>

Notes:

(HCS 7.x and earlier) cd ..\base\bin

Hcmdsgetlogs /dir <output dir>

(HCS 8.x) cd ..\base64\bin

Hcmds64getlogs /dir <output dir>

To minimize the data collection when the DB and .csv files are not required run the following command:

(HCS 7.x and earlier) hcmdsgetlogs /dir <output dir> /logtypes log

(HCS 8.x) hcmds64getlogs /dir <output dir> /logtypes log

** <output dir> is an empty dir of your choosing, i.e. D:\logs

Example: Hcmds64getlogs /dir D:\logs

 

  • Was this article helpful?