Skip to main content
Outside service Partner
Hitachi Vantara Knowledge

Changing the SVP IP address

You can change the IP address for the SVP using the Windows 7 or 10 operating system on the SVP or the Storage Device List.

Changing the SVP IP address in Windows 7

Use this procedure if a storage system is not registered on the SVP or the storage system service has not started.

Procedure

  1. On the SVP, click Start Control Panel Network and Sharing Center.

  2. Click Change adapter settings.

  3. Click a network for which you want to set an IP address, and then set the IP address.

Changing the SVP IP address using Storage Device List

To change the SVP IP address in Storage Device List, change the IP address registered using the SVP's Windows operating system, and then perform the following procedure.

Before you begin

  • Do not register the storage system on the SVP.
  • Do not start the start the storage system service.

Procedure

  1. On the SVP, click Start All Programs Device Manager - Storage Navigator StorageDeviceList.

    The Storage Device List window opens.
  2. In the top-right side of the window, click SVP IP Address.

    The Change SVP IP Address window opens.
  3. Click IPv4 or IPv6.

  4. Enter the new IP address of the SVP.

  5. Click Apply.