VSP G800 storage system specifications
The following table provides an overview of the system specifications for VSP G800 storage system.
Item | VSP G800 specifications | |||
System | Number of disk drives | Minimum | 4 (disk-in model) / 0 (diskless model) *10 | |
Maximum | 1,440 | |||
Number of flash drives | Minimum | 4 (disk-in model) / 0 (diskless model) *10 | ||
Maximum | 1,440 | |||
Number of flash module drives | Minimum | 4 | ||
Maximum | 576 | |||
RAID level | RAID1, RAID5, RAID6 | |||
RAID group configuration | RAID6 | 6D+2P, 12D+2P, 14D+2P | ||
RAID5 | 3D+1P, 4D+1P, 6D+1P, 7D+1P | |||
RAID1 | 2D+2D, 4D+4D | |||
Maximum number of spare drives | 64 *1 | |||
Maximum number of LDEVs | 16,384 | |||
Maximum storage system capacity (physical capacity) | (SFF HDD/1.8 TB) 1,992 TB | |||
(SSD/3.8 TB) 4,356 TB | ||||
(LFF HDD/10 TB) 14,098 TB | ||||
(NF/14 TB) 8,106 TB | ||||
Maximum external configuration | 64 PB | |||
Memory | Cache memory capacity | 64GB to 512GB | ||
Cache memory capacity with NAS module is installed9 | 256 GB/521 GB | |||
Cache flash memory | BM30 | |||
Storage I/F | DKC to Drive Interface | SAS/Dual Port | ||
Data transfer rate | 6 Gbps/12 Gbps | |||
Maximum number of HDD per SAS I/F | 144 | |||
Maximum number of DKB PCB | 8 | |||
Device I/F | Support channel type | Open system | Fibre Channel Short Wavelength *2 / iSCSI*4 | |
NAS(NFS/CIFS) | ||||
Data transfer rate | Fibre Channel | 200/400/800/1,600/3,200 MB/s | ||
iSCSI | 100/1,000 MB/s | |||
NAS(NFS/CIFS) | 1,000 MB/s | |||
Maximum number of CHB | 12 (16:DKB Slot used) | |||
16 (CHBB used)*8 (20:DKB slot used) | ||||
Maximum number of CHB with NAS module is installed | 4 | |||
8 (CHBB used) | ||||
Power | AC input | Single phase | 50Hz/60Hz : 200V to 240V | |
DC input*7 | N/A | |||
Acoustic level*3 | Operating | CBL | 60dB | |
CBSS/CBSL | N/A | |||
DBS/DBSC/DBL/DBLC/DBF | 60dB | |||
DBSD/DBLD | N/A | |||
DB60/DB60C | 71dB(*5 *6) | |||
Standby | CBL | 55dB | ||
CBSS/CBSL | N/A | |||
DBS/DBSC/DBL/DBLC/DBF | 55dB | |||
DBSD/DBLD | N/A | |||
DB60/DB60C | 71dB(*5 *6) | |||
Non-stop maintenance | Control PCB | Supported | ||
Cache memory | Supported | |||
Cache flash memory | Supported | |||
Power supply, fan | Supported | |||
Microcode | Supported | |||
Disk drive, flash drive, flash module drive | Supported | |||
Notes: *1: Available as spare or data disks. *2: By the replacing SFP transceiver of the fibre port on the CHB to the DKC-F810I-1PL8/1PL16, the port can be used for the long wavelength. *3: Measurement Condition: The point 1m far from floor and surface of the product. *4: Short Wavelength model is DW-F800-2HS10S, Copper model is DW-F800-2HS10B. *5: Sound pressure level [LA] changes from 66dB to 75dB according to the ambient temperature, drive configuration and operating status. The maximum could be 79dB during maintenance procedure for failed ENC or Power Supply. *6: Acoustic power level [LwA] measured by ISO7779 condition is 7.2B. And it changes from 7.2B to 8.1B according to the ambient temperature, drive configuration and operating status. *7: The DC power supply is unavailable. *8: SVOS6.3.1 or later *9: The capacity of the cache memory installed in RAID controller. A cache memory installed in NAS module is not included. *10: When NAS Module is installed, the Diskless configuration is not supported |