VSP G200 storage system specifications
The following table provides an overview of the system specifications for VSP G200 storage system.
| Item | VSP G200*7 specifications | |||
| System | Number of disk drives | Minimum | 4 (disk-in model) / 0 (diskless model) *9 | |
| Maximum | 264 | |||
| Number of flash drives | Minimum | 4 (disk-in model) / 0 (diskless model) *9 | ||
| Maximum | 264 | |||
| Number of flash module drives | Minimum | 4 | ||
| Maximum | 84 | |||
| RAID level | RAID1, RAID5, RAID6 | |||
| RAID group configuration | RAID6 | 6D+2P, 12D+2P, 14D+2P | ||
| RAID5 | 3D+1P, 4D+1P, 6D+1P, 7D+1P | |||
| RAID1 | 2D+2D, 4D+4D | |||
| Maximum number of spare drives | 16 *1 | |||
| Maximum number of LDEVs | 2,048 | |||
| Maximum storage system capacity (physical capacity) | (SFF HDD/1.8 TB) 332 TB | |||
| (SSD/3.8 TB) 726 TB | ||||
| (LFF HDD/10 TB) 2,467 TB | ||||
| (NF/14 TB) 1,351 TB | ||||
| Maximum external configuration | 8 PB | |||
| Memory | Cache memory capacity | 32 GB/64 GB | ||
| Cache memory capacity with NAS module is installed*8 | N/A | |||
| Cache flash memory | BM10 | |||
| Storage I/F | DKC to drive interface | SAS/Dual Port | ||
| Data transfer rate | 6 Gbps/12 Gbps | |||
| Maximum number of HDD per SAS I/F | 144 | |||
| Maximum number of DKB PCB | N/A | |||
| Device I/F | Support channel type | Open system | Fibre Channel Short Wavelength *2 / iSCSI*4 | |
| NAS(NFS/CIFS) | ||||
| Data transfer rate | Fibre Channel | 200/400/800/1,600/3,200 MB/s | ||
| iSCSI | 100/1,000 MB/s | |||
| NAS(NFS/CIFS) | N/A | |||
| Maximum number of CHB | 4 | |||
| Maximum number of CHB with NAS module is installed*8 | ||||
| N/A | ||||
| Power | AC input | Single phase | 50Hz/60Hz : 200V to 240V | |
| Single phase | 50Hz/60Hz : 100V to 120V | |||
| DC input | -48V to -60V | |||
| Acoustic level(*3) | Operating | CBL | N/A | |
| CBSS/CBSL | 60dB | |||
| DBS/DBSC/DBL/DBLC/DBF | 60dB | |||
| DBSD/DBLD | 60dB | |||
| DB60/DB60C | 71dB(*5 *6) | |||
| Standby | CBL | N/A | ||
| CBSS/CBSL | 55dB | |||
| DBS/DBSC/DBL/DBLC/DBF | 55dB | |||
| DBSD/DBLD | 55dB | |||
| DB60/DB60C | 71dB(*5 *6) | |||
| Non-stop maintenance | Control PCB | Supported | ||
| Cache memory | Supported | |||
| Cache flash memory | Supported | |||
| Power supply, fan | Supported | |||
| Microcode | Supported | |||
| Disk drive, flash drive, flash module drive | Supported | |||
|
Notes: *1: Available as spare or data disks. *2: By the replacing SFP transceiver of the fibre port on the CHB to the DKC-F810I-1PL8/1PL16, the port can be used for the long wavelength. *3: Measurement Condition: The point 1m far from floor and surface of the product. *4: Short Wavelength model is DW-F800-2HS10S, Copper model is DW-F800-2HS10B. *5: Sound pressure level [LA] changes from 66dB to 75dB according to the ambient temperature, drive configuration and operating status. The maximum could be 79dB during maintenance procedure for failed ENC or Power Supply. *6: Acoustic power level [LwA] measured by ISO7779 condition is 7.2B. And it changes from 7.2B to 8.1B according to the ambient temperature, drive configuration and operating status. *7: The DC power supply of the HM800S model does not support DBF and DB60/DB60C. *8: The capacity of the cache memory installed in RAID controller. A cache memory installed in NAS module is not included. *9: When NAS Module is installed, the Diskless configuration is not supported. | ||||