Mechanical specifications for VSP G200
The storage system mechanical specifications are described for VSP G200 .
VSP G200 mechanical specifications (AC power supply model)
Quantity | Component | Description |
1 | CBSS |
A SFF controller chassis consisting of controllers, channel boards, disk boards, NAS module (optional), AC or DC power supplies, and batteries with cooling fans. |
1 | CBSL |
A LFF controller chassis consisting of controllers, channel boards, disk boards, NAS module (optional), AC or DC power supplies, and batteries with cooling fans. |
Quantity | Component | Description |
1 | SFF drive tray (DBS) |
A drive tray that supports 2.5-inch disk drives and 2.5-inch flash drives. The drive tray consists of an ENC, cooling fans, and AC-DC power supplies or DC-DC power supplies. |
1 | LFF drive tray (DBL) |
A drive tray that supports 3.5-inch disk drives and 3.5-inch flash drives. The drive tray consists of an ENC, cooling fans, and AC-DC power supplies or DC-DC power supplies. |
1 | FMD tray |
A drive tray that supports flash module drives and consists of an ENC and AC-DC power supplies equipped with built-in cooling fans. |
1 | Dense intermix drive tray |
A drive chassis that supports a variety of drive types such as 2.5-inch drives, 3.5-inch drives, and flash drives. The chassis consists of an ENC and AC-DC power supplies equipped with built-in cooling fans. |
Item |
Component |
Specification |
Drive size (WxDxH) | CBSS, SFF drive tray |
2.5-type: 3.21 x 8.10 x 0.74 inches (81.6 x 205.7 x 18.7 mm) |
CBSL, LFF drive tray |
3.5-type: 4 x 5.78 x 1.02 inches (101.6 x 147.0 x 26.1 mm) | |
FMD drive tray |
Flash module drive: 5.74 x 14.44 x 0.78 inches (146 x 366.8 x 19.8 mm) | |
Data capacity (GB) | CBSS, SFF drive tray |
2.5-type: 196.92, 288.20, 393.85, 472.61, 576.39, 945.23, 1152.79, 1729.29, 1890.46, 3780.92 GB |
CBSL, LFF drive tray, dense intermix drive tray |
3.5-type: 393.85, 1152.79, 1729.29, 3916.14, 5874.22, 9790.36 GB | |
FMD drive tray |
Flash module drive: 1759.21, 3518.43 , 7036.87, 14073.74 GB | |
Rotational speed (min1) | CBSS, SFF drive tray |
2.5-type: 288.20 GB, 15,000 RPM 2.5-type: 576.39 GB, 10,000 or 15,000 RPM 2.5-type: 1152.79 GB, 10,000 RPM 2.5-type: 1729.29 GB, 10,000 RPM |
CBSL, LFF drive tray |
3.5-type: 1152.79 GB, 10,000 RPM 3.5-type: 1729.29 GB, 10,000 RPM 3.5-type: 3916.14 GB, 7,200 RPM 3.5-type: 5874.22 GB, 7,200 RPM 3.5-type: 9790.36 GB, 7,200 RPM | |
FMD drive tray |
Flash module drive: 1759.21, 3518.43 , 7036.87, 14073.74 GB | |
Maximum number of drives that can be mounted | CBSS |
24 drives |
CBSL |
12 drives | |
SFF drive tray |
24 drives | |
LFF drive tray |
12 drives | |
FMD drive tray |
12 drives | |
Dense intermix drive tray |
60 drives | |
Maximum number of spare drives |
16 |
Item |
Component |
Specification |
Interface type |
Fibre Channel optical |
8-Gbps, 16-Gbps, 32-Gbps |
iSCSI optical |
10-Gbps | |
Copper iSCSI |
10-Gbps | |
Data transfer speed (maximum speed for transfer to host) |
Fibre Channel optical |
800-Mbps (Fibre Channel) |
Fibre Channel optical |
1600-Mbps (Fibre Channel) | |
Fibre Channel optical |
3200-Mbps (Fibre Channel) | |
iSCSI optical |
10-Gbps (iSCSI optical) | |
Copper iSCSI | 10-Gbps (copper iSCSI) | |
Number of ports |
8-Gbps Fibre Channel optical |
16 |
16-Gbps Fibre Channel optical (2-port) |
8 | |
16-Gbps Fibre Channel optical (4-port) |
16 | |
32-Gbps Fibre Channel optical (4-port) |
16 | |
10-Gbps optical iSCSI |
8 | |
10-Gbps copper iSCSI |
8 | |
Transferred block size |
512 bytes | |
Maximum number of hosts using a Fibre Channel switch |
255 | |
Maximum number of hosts using a network switch |
255 |
Storage system intake temperature | CBSS | CBSL |
Up to 75.2º F (24º C) | 5 years | 5 years |
Up to 86º F (30º C) | 5 years | 4 years |
Up to 93.2º (34º C) | 4 years | 3 years |
Up to 104º (40º C) | 3 years | 2 years |
Item |
Drive tray |
RAID Level |
SAS, SAS 7.2k, flash drives mounted |
RAID 1 |
2D+2D, 4D+4D |
RAID 5 |
3D+1P, 4D+1P, 6D+1P, 7D+1P |
RAID 6 |
6D+2P, 12D+2P, 14D+2P |
Item |
Specification |
Maximum number of parity groups |
88 |
Maximum volume size |
3 TB (or 4 TB when using the LDEVs of other storage systems) |
Maximum volumes/host groups and iSCSI targets |
2,048 |
Maximum volumes/parity groups |
2,048 |
Item |
Component |
Specifications |
Shared memory |
Flash memory |
32 MB |
L3 cache memory |
4 MB | |
SDRAM |
1 GB | |
Data assurance method |
Data bus |
Parity |
Cache memory |
ECC (1 bit for correction, 2 bits for detection) | |
Drive |
Data assurance code |
Item |
Component |
Specifications |
Start-up time (min)1 | Controller |
Standard: 5 to 8 |
Drive trays |
Standard: 5 to 8 | |
Chassis size | Controller |
WxDxH: 19 x 32 x 3.5 inches (483 x 813 x 88 mm) |
SFF drive tray |
WxDxH: 19 x 22.2 x 3.5 inches (483 x 565 x 88.2 mm) | |
LFF drive tray |
WxDxH: 19 x 22.2 x 3.5 inches (483 x 565 x 88.2 mm) | |
FMD drive tray |
WxDxH: 19 x 30 x 3.4 inches (483 x 762 x 87 mm) | |
Dense intermix drive tray |
WxDxH: 19 x 40.5 x 7 inches (482 x 1029 x 176 mm) | |
Mass (approximate)2 | CBSS |
97 lbs (44 kg) |
CBSL |
101.4 lbs (46 kg) | |
SFF drive tray |
51 lbs (23 kg) | |
LFF drive tray |
59.5 lbs (27 kg) | |
FMD drive tray |
84 lbs (38 kg) | |
Dense intermix drive tray |
198 lbs (90 kg) | |
Required height | CBSS, CBSL | 2 |
SFF drive tray | 2 | |
LFF drive tray | 2 | |
FMD drive tray | 2 | |
Dense intermix drive tray | 4 | |
Notes
|
Item |
Specifications |
Capacity (GB) |
64 GB |
Control method |
Read LRU, Write after |
Battery backup |
Provided |
Backup duration |
Unrestricted (saving to a nonvolatile memory) |
Data in the cache memory is preserved against power failures. If a power outage occurs, data in cache memory is written to drives.
When the storage system enters Cache Backup mode, the amber WARNING LED goes on to when the system starts. This warning indicates that the battery charge has dropped significantly and the remaining battery capacity is not sufficient; the storage system will continue operating with the Write Cache function disabled.
When the battery is charged, the warning indication disappears, and the storage system continues the operation in the Write Cache function.
The warning indication disappears within six hours. Even when the warning is shown, normal operation is assured in Write-Through. Read and write performance is lowered because the Write Cache function is disabled.
If the storage system is not charged for more than six months, the battery can become overcharged and sustain unrecoverable damage. To avoid this situation, charge the battery more than 3 hours every six months.
Item |
Specifications |
Insulation withstand voltage |
AC 1,500 V (100 mA, 1 min) |
Insulation resistance |
DC 500 V, 10 M Ω or more |
VSP G200 mechanical specifications (DC power supply model)
Quantity | Component | Description |
1 | CBSSD |
A SFF controller chassis consisting of controllers, channel boards, disk boards, NAS module (optional), DC power supplies, and batteries with cooling fans. |
1 | CBSLD |
A LFF controller chassis consisting of controllers, channel boards, disk boards, NAS module (optional), DC power supplies, and batteries with cooling fans. |
Quantity | Component | Description |
1 | SFF drive tray (DBSD) |
A drive tray that supports 2.5-inch disk drives and 2.5-inch flash drives. The drive tray consists of an ENC, cooling fans, and DC-DC power supplies. |
1 | LFF drive tray (DBLD) |
A drive tray that supports 3.5-inch disk drives and 3.5-inch flash drives. The drive tray consists of an ENC, cooling fans, and DC-DC power supplies. |
Item |
Component |
Specification |
Drive size (WxDxH) | CBSSD, SFF drive tray |
2.5-type: 3.21 x 8.10 x 0.74 inches (81.6 x 205.7 x 18.7 mm) |
CBSLD, LFF drive tray |
3.5-type: 4 x 5.78 x 1.02 inches (101.6 x 147.0 x 26.1 mm) | |
Data capacity (GB) | CBSSD, SFF drive tray |
2.5-type: 196.92, 288.20, 393.85, 472.61, 576.39, 945.23, 1152.79, 1729.29, 1890.46, 3780.92 GB |
CBSLD, LFF drive tray |
3.5-type: 393.85, 1152.79, 1729.29, 3916.14, 5874.22, 9790.36 GB | |
Rotational speed (min1) | CBSSD, SFF drive tray |
2.5-type: 288.20 GB, 15,000 RPM 2.5-type: 576.39 GB, 10,000 or 15,000 RPM 2.5-type: 1152.79 GB, 10,000 RPM 2.5-type: 1729.29 GB, 10,000 RPM |
CBSLD, LFF drive tray |
3.5-type: 1152.79 GB, 10,000 RPM 3.5-type: 1729.29 GB, 10,000 RPM 3.5-type: 3916.14 GB, 7,200 RPM 3.5-type: 5874.22 GB, 7,200 RPM 3.5-type: 9790.36 GB, 7,200 RPM | |
Maximum number of drives that can be mounted | CBSSD, SFF drive tray |
24 drives |
CBSLD, LFF drive tray |
12 drives | |
Maximum number of spare drives |
16 |
Storage system intake temperature | CBSS | CBSL |
Up to 75.2º F (24º C) | 5 years | 5 years |
Up to 86º F (30º C) | 5 years | 4 years |
Up to 93.2º (34º C) | 4 years | 3 years |
Up to 104º (40º C) | 3 years | 2 years |
Item |
Component |
Specification |
Interface type |
Fibre Channel optical |
8-Gbps, 16-Gbps, 32-Gbps |
iSCSI optical |
10-Gbps | |
Copper iSCSI |
10-Gbps | |
Data transfer speed (maximum speed for transfer to host) |
Fibre Channel optical |
800-Mbps (Fibre Channel) |
Fibre Channel optical |
1600-Mbps (Fibre Channel) | |
Fibre Channel optical |
3200-Mbps (Fibre Channel) | |
iSCSI optical |
10-Gbps (iSCSI optical) | |
Copper iSCSI | 10 Gbps (copper iSCSI) | |
Number of ports |
8-Gbps Fibre Channel optical |
16 |
16-Gbps Fibre Channel optical (2-port) |
8 | |
16-Gbps Fibre Channel optical (4-port) |
16 | |
32-Gbps Fibre Channel optical (4-port) |
16 | |
10-Gbps optical iSCSI |
8 | |
10 Gbps copper iSCSI |
8 | |
Transferred block size |
512 bytes | |
Maximum number of hosts using a Fibre Channel switch |
255 | |
Maximum number of hosts using a network switch |
255 |
Item |
Drive tray |
RAID Level |
SAS, SAS 7.2k, flash drives mounted |
RAID 1 |
2D+2D, 4D+4D |
RAID 5 |
3D+1P, 4D+1P, 6D+1P, 7D+1P |
RAID 6 |
6D+2P, 12D+2P, 14D+2P |
Item |
Specification |
Maximum number of parity groups |
88 |
Maximum volume size |
3 TB (or 4 TB when using the LDEVs of other storage systems) |
Maximum volumes/host groups and iSCSI targets |
2,048 |
Maximum volumes/parity groups |
2,048 |
Item |
Component |
Specifications |
Shared memory |
Flash memory |
32 MB |
L3 cache memory |
4 MB | |
SDRAM |
1 GB | |
Data assurance method |
Data bus |
Parity |
Cache memory |
ECC (1 bit for correction, 2 bits for detection) | |
Drive |
Data assurance code |
Item |
Component |
Specifications |
Start-up time (min)1 | Controller |
Standard: 5 to 8 |
Drive trays |
Standard: 5 to 8 | |
Chassis size | Controller |
WxDxH: 19 x 32 x 3.5 inches (483 x 813 x 88 mm) |
SFF drive tray |
WxDxH: 19 x 22.2 x 3.5 inches (483 x 565 x 88.2 mm) | |
LFF drive tray |
WxDxH: 19 x 22.2 x 3.5 inches (483 x 565 x 88.2 mm) | |
Mass (approximate)2 | CBSSD |
97 lbs (44 kg) |
CBSLD |
101.4 lbs (46 kg) | |
SFF drive tray |
51 lbs (23 kg) | |
LFF drive tray |
59.5 lbs (27 kg) | |
Required height | CBSSD, CBSLD | 2 |
SFF drive tray | 2 | |
LFF drive tray | 2 | |
Notes
|
Item |
Specifications |
Capacity (GB) |
64 GB |
Control method |
Read LRU, Write after |
Battery backup |
Provided |
Backup duration |
Unrestricted (saving to a nonvolatile memory) |
Data in the cache memory is preserved against power failures. If a power outage occurs, data in cache memory is written to drives.
When the storage system enters Cache Backup mode, the amber WARNING LED goes on to when the system starts. This warning indicates that the battery charge has dropped significantly and the remaining battery capacity is not sufficient; the storage system will continue operating with the Write Cache function disabled.
When the battery is charged, the warning indication disappears, and the storage system continues the operation in the Write Cache function.
The warning indication disappears within six hours. Even when the warning is shown, normal operation is assured in Write-Through. Read and write performance is lowered because the Write Cache function is disabled.
If the storage system is not charged for more than six months, the battery can become overcharged and sustain unrecoverable damage. To avoid this situation, charge the battery more than 3 hours every six months.
Item |
Specifications |
Insulation withstand voltage |
AC 1,500 V (100 mA, 1 min) |
Insulation resistance |
DC 500 V, 10 M Ω or more |