VSP F800 storage system mechanical specifications
The storage system mechanical specifications are described for VSP F800.
VSP F800 mechanical specifications
Controller
1 CBLH
Drive tray
1 FMD drive tray
| Item | Description |
| NAS module |
Optional component for block and file storage configuration |
Drive size
| Item | Specification |
| Flash Module Drive (flash module drive tray) | 5.74 x 14.44 x 0.78 inches (146 x 366.8 x 19.8 mm) |
Data capacity (GB)
| Flash Module Drive (flash module drive tray) | 1759.21, 3518.43 , 7036.87, 14073.74 |
Maximum mountable quantity
| Maximum number of flash module drives (VSP Fx00 models) | 40 |
| Maximum number of spare drives (VSP Fx00 models) | 2 |
Battery specifications
| Storage system intake temperature | CBLH |
|
Up to 75.2º F (24º C) | 5 years |
|
Up to 86º F (30º C) | 5 years |
|
Up to 93.2º (34º C) | 4 years |
|
Up to 104º (40º C) | 3 years |
Host interface
|
Item |
Component |
Specification |
|
Interface type |
Fibre Channel optical |
8-Gbps, 16-Gbps, 32-Gbps |
|
iSCSI optical |
10-Gbps | |
|
iSCSI (Copper) |
10-Gbps | |
|
NAS module |
10 Gbps (Fibre Channel optical) | |
|
Data transfer speed (maximum speed for transfer to host) |
Fibre Channel optical |
800-Mbps (Fibre Channel) |
|
1600-Mbps (Fibre Channel) | ||
|
3200-Mbps (Fibre Channel) | ||
|
iSCSI optical |
10-Gbps (iSCSI optical) | |
|
iSCSI (Copper) |
10 Gbps (iSCSI copper) | |
|
NAS module (Fibre Channel) |
1000 Mbs | |
| VSP G800 maximum number of ports |
8 Gbps Fibre Channel (optical) |
64 |
|
16 Gbps Fibre Channel (optical 2-port) |
32 | |
|
16 Gbps Fibre Channel (optical 4-port) |
64 | |
|
32 Gbps Fibre Channel (optical) |
64 | |
|
10 Gbps iSCSI optical) |
32 | |
|
10 Gbps iSCSI (copper) |
32 | |
| VSP F800 maximum number of ports |
8 Gbps Fibre Channel (optical) |
48 |
|
16 Gbps Fibre Channel (optical) |
24 | |
|
32 Gbps Fibre Channel (optical) |
48 | |
|
10 Gbps iSCSI (optical) |
24 | |
|
10 Gbps iSCSI (copper) |
24 | |
|
Maximum number of ports (NAS module installed) |
8 Gbps Fibre Channel (optical) |
16 |
|
16 Gbps Fibre Channel (optical 2-port) |
8 | |
|
16 Gbps Fibre Channel (optical 4-port) |
16 | |
|
32 Gbps Fibre Channel (optical) |
16 | |
|
10 Gbps iSCSI (optical) |
8 | |
|
10 Gbps iSCSI (copper) |
8 | |
|
10 Gbps Fibre Channel (optical) |
12 | |
|
Maximum number of ports (NAS modules not installed) |
8 Gbps Fibre Channel (optical) |
80 |
|
16 Gbps Fibre Channel (optical 2-port) |
40 | |
|
16 Gbps Fibre Channel (optical 4-port) |
80 | |
|
32 Gbps Fibre Channel (optical) |
80 | |
|
10 Gbps iSCSI (optical) |
40 | |
|
10 Gbps iSCSI (copper) |
40 | |
|
Maximum number of ports (host port expansion chassis and NAS module installed) |
8 Gbps Fibre Channel (optical) |
32 |
|
16 Gbps Fibre Channel Optical (2-port) |
16 | |
|
16 Gbps Fibre Channel Optical (4-port) |
32 | |
|
32 Gbps Fibre Channel Optical (4-port) |
32 | |
|
10 Gbps iSCSI (optical) |
16 | |
|
10 Gbps iSCSI (copper) |
16 | |
|
10 Gbps Fibre Channel (optical) |
12 | |
|
Transferred block size |
512 bytes | |
|
Maximum number of hosts using a Fibre Channel switch |
255 | |
|
Maximum number of hosts using a network switch |
255 |
D: Data drive, P: Parity drive.
Although the storage system with a configuration of RAID 1, RAID 5, or RAID 6 provides data reliability enhanced by redundancy, there is a chance that user data could be lost due to an unexpected host, storage system hardware, or software failure. Therefore, users are requested to back up all data.
|
RAID Level |
SAS, SAS 7.2k, flash drives mounted |
|
RAID 1 |
2D+2D, 4D+4D |
|
RAID 5 |
3D+1P, 4D+1P, 6D+1P, 7D+1P |
|
RAID 6 |
6D+2P, 12D+2P, 14D+2P |
|
Item |
Specification |
|
Maximum number of RAID groups | 480 |
|
Maximum volume size |
3 TB (or 4 TB when using the LDEVs of other storage systems) |
|
Maximum volumes/host groups and iSCSI targets |
2048 |
|
Maximum volumes/parity groups |
2048 |
Shared memory and data assurance
| Item | Specification |
| Flash memory | 32 M bytes |
| L3 Cache memory | 4 M bytes |
| SDRAM | 1 G bytes |
| Data bus | Parity |
| Cache memory | ECC (1 bit for correction, 2 bits for detection) |
| Drive | Data assurance code |
Start-up time
| Item |
| Standard: 5-to-10 minutes.
The start-up time may be longer in proportion to the number of drive trays connected. With a maximum configuration 1 controller tray and 19 drive trays, start-up time is approximately 10 minutes. |
Chassis size
|
Component |
Specification (WxDxH) |
| CBLH | 19.01 x 35.10 x 6.86 inches (483 x 891.7 x 174.3 mm) |
Mass (value of maximum configuration when all controllers and drives are mounted)
|
Component |
Specification |
| CBLH | 187.39 pounds (85 kg) |
Required height
|
Component |
Specification |
| CBLH | 4 U |
|
Item |
Specification |
|
Capacity (GB) |
512 |
|
Control method |
Read LRU, Write after |
|
Battery backup |
Provided |
|
Backup duration |
Unrestricted (saving to a nonvolatile memory) |
Data in the cache memory is preserved against power failures. If a power outage occurs, data in cache memory is written to drives.
When the storage system enters Cache Backup mode, the amber WARNING LED goes on to when the system starts. This warning indicates that the battery charge has dropped significantly and the remaining battery capacity is not sufficient; the storage system will continue operating with the Write Cache function disabled.
When the battery is charged, the warning indication disappears, and the storage system continues the operation in the Write Cache function.
The warning indication disappears within six hours. Even when the warning is shown, normal operation is assured in Write-Through. Read and write performance is lowered because the Write Cache function is disabled.
If the storage system is not charged for more than six months, the battery can become overcharged and sustain unrecoverable damage. To avoid this situation, charge the battery more than 3 hours every six months.
|
Item |
Specification |
|
Insulation withstand voltage |
AC 1,500 V (100 mA, 1 min) |
|
Insulation resistance |
DC 500 V, 10 M Ω or more |