Skip to main content

We've Moved!

Product Documentation has moved to docs.hitachivantara.com
Hitachi Vantara Knowledge

Setting storage system information

You can set the name, contact information, and location of the storage system.

CautionMake sure to document the configured values, because they are required to use SNMP agents.
CautionWhen changing a setting more than once, ensure that the current setting is complete before changing it again. Otherwise, only the new change will be applied, and the result might be different from what you expected.

Before you begin

  • You must have the Storage Administrator (Initial Configuration) role to complete this procedure.

Procedure

  1. In the Device Manager - Storage Navigator Storage Systems tree, select the storage system.

  2. From Settings, click Environmental Settings Edit Storage System.

  3. Enter the items that you want to set.

    You can enter up to 180 alphanumeric characters (ASCII codes) excluding several symbols (\ , / ; : * ? " < > | & % ^). Do not use a space at the beginning or the end.
  4. Click Finish.

  5. In the Confirm window, check the settings and enter a task name in Task Name.

  6. Click Apply. The task is now registered. If the Go to tasks window for status check box is checked, the Task window opens to show the status of the task.