Skip to main content

We've Moved!

Product Documentation has moved to docs.hitachivantara.com
Hitachi Vantara Knowledge

Accessing the storage system

You can access the storage system using the Hitachi Storage Navigator web user interface running on the SVP. A client machine that meets the criteria can be used to connect to the SVP. Learn to set up a client machine and log in to your storage system.

Configuring a management client

Before you can use Hitachi Device Manager - Storage Navigator to manage your storage system, you must set up a management client to use the management software.

General requirements

  • An SVP, required for system maintenance, must be connected to the storage system. Device Manager - Storage Navigator connects to the SVP through a TCP/IP network.
  • Several storage systems can be managed by one management client. Device Manager - Storage Navigator must be set up for each storage system.
  • A maximum of 32 management clients (Device Manager - Storage Navigator) can access the same storage system concurrently.
  • Use category 5e or 6a LAN cable for LAN connections when the transfer speed is 1 Gbps. Maximum cable length is 328 feet (100 meters). For assistance, contact customer support.

Requirements for Windows-based computers

The storage system must meet hardware and software requirements to run Windows as the operating system.

The combinations of operating system, architecture, browser, Java Runtime Environment, and Adobe Flash Player described below are fixed requirements. Using other combinations or versions might produce unpredictable results such as the inability to operate program windows.
Hardware requirements

Item

Requirement

Processor (CPU)

Pentium 4 640 3.2 GHz or better

(Recommended: Core2Duo E6540 2.33 GHz or better)

Memory (RAM)

2 GB or more

Recommended: 3 GB

Available storage space

500 MB or more

Monitor

True Color 32-bit or better

Resolution: 1280 x 1024 or better

Keyboard and mouse

You cannot use the mouse wheel feature.

Ethernet LAN card for TCP/IP network

100BASE-TX

1000BASE-T

Software requirements

Operating system

Browser

Java Runtime Environment (JRE)

Adobe Flash Player

Windows Server 2008 (SP2) 32 bit or 64 bit

Internet Explorer 9.0

JRE 7.0 Update 17

11.7

Internet Explorer 9.0

JRE 7.0 Update 17

11.7

Windows 2008 R2 (SP1) 64 bit

Internet Explorer 11.0

JRE 7.0 Update 51

12.0

Windows Server 2012 64 bit

Internet Explorer 10.0

JRE 7.0 Update 17

11.7

Windows Server 2012 R2 64 bit

Internet Explorer 11.0

JRE 7.0 Update 51

12.0

Windows Server 2016 64 bit

Internet Explorer 11.0

JRE 8.0 Update 111

24.0

Windows Server Vista (SP2) 32 bit or 64 bit

Internet Explorer 9.0

JRE 7.0 Update 17

11.7

Internet Explorer 9.0

JRE 7.0 Update 17

11.7

Windows 7 (SP1) 32 bit or 64 bit

Internet Explorer 11.0

JRE 7.0 Update 51

12.0

Internet Explorer 11.0

JRE 7.0 Update 51

12.0

Windows 8.1 32 bit or 64 bit

Google Chrome 48.0 or later

JRE 8.0 Update 71

20.0

Internet Explorer 11.0

JRE 7.0 Update 51

12.0

Google Chrome 48.0 or later

JRE 8.0 Update 71

20.0

Notes:

  • If the SVP supports Internet Protocol Version 6 (IPv6), you can specify IPv6 addresses.
  • Use Adobe Flash Player with the same architecture (32 bit or 64 bit) as the browser.
  • Only the latest version of Internet Explorer active on each OS is supported, according to Microsoft support policy.
  • The Device Manager - Storage Navigator computer must be restarted after enabling Adobe Flash Player.
NoteTo use Device Manager - Storage Navigator secondary windows, first install Java Runtime Environment (JRE).

Requirements for UNIX/Linux-based computers

The storage system must meet hardware and software requirements to run UNIX or Linux as the operating system.

NoteThe combinations of operating system, architecture, browser, Java Runtime Environment, and Adobe Flash Player described below are fixed requirements. Using other combinations or versions might produce unpredictable results such as the inability to operate program windows.
Hardware requirements

Item

Requirement

Processor (CPU)

Pentium 4 640 3.2 GHz or better

(Recommended: Core2Duo E6540 2.33 GHz or better)

Memory (RAM)

2 GB or more

Recommended: 3 GB

Available storage space

500 MB or more

Monitor

Resolution: 1280 x 1024 or better

Keyboard and mouse

You cannot use the mouse wheel feature.

Ethernet LAN card for TCP/IP network

100BASE-TX

1000BASE-T

Software requirements

Operating system

Architecture

Browser

Java Runtime Environment (JRE)

Adobe Flash Player

Solaris 10

32 bit

Firefox 3.6.26

JRE 7.0 Update 17

11.2

Red Hat Enterprise Linux 6.2

64 bit

Firefox 3.6.24

JRE 7.0 Update 17

11.2

Notes:

  • Use Flash Player with the same architecture (32 bit or 64 bit) as the browser.
Note

The IPv6 HTTPS connection from Firefox is not supported.

Connecting through a firewall

To connect the management client and the SVP through a firewall, configure the firewall so that the TCP/IP port for the protocol you use becomes available.

When attaching Device Manager - Storage Navigator to multiple storage systems, the installer must log in to the SVP of each storage system using separate Device Manager - Storage Navigator sessions and separate web browser instances.

When operating the management GUI directly from the SVP without using the management client, it is not necessary to register ports of protocols other than RMI, SLP, and SMI-S in the table below.

The type of the protocol and the port used is shown in the following table.

Protocol

Port number

Direction of communication

HTTP

80

From the Device Manager - Storage Navigator web client to the SVP

HTTPS

443

RMI

1099

RMI (SSL)

5443

RMI

51099

RMI

51100-51355*

SLP

427

SMI-S

5989-6244*

*When the SVP software version is 83-03-01-xx/00 or later, unused port numbers are automatically allocated from the described range at the time of the storage system registration and a firewall is also set. The allocated ports numbers are used when starting the storage system. When the SVP software version is less than 83-03-01-xx/00, 51100 and 5989 are used respectively.

NoteIf you change the port numbers used by the SVP, the firewall is set with the changed port numbers.

Backing up HDvM - SN configuration files

Before replacing an SVP, you must make a backup copy of the Device Manager - Storage Navigator configuration files on the SVP. You can then use the backup copy to restore the configuration file if it becomes necessary, or to configure a replacement SVP if one fails.

The following configuration items can be backed up and restored. Before you create the backup, ensure that the settings are correct.

  • Device Manager - Storage Navigator environment parameters
  • Authentication server connection settings
  • Key management server connection settings
  • Display settings (table width) for each Device Manager - Storage Navigator user
  • Device Manager - Storage Navigator login warning messages
  • Device Manager - Storage Navigator task information
  • SMI-S application settings
  • SSL certification for HTTPS/SMI-S/RMI

Before you begin

  • You must have the Storage Administrator (Initial Configuration) role to perform this task.
  • You must be logged into the SVP.

Procedure

  1. Stop all services running on the storage system.

  2. Open a command prompt window with administrator permissions.

  3. In the folder where the .bat file is located, execute the following command:

    C:\MAPP\wk\Supervisor\MappIniSet>MappBackup.bat absolute-path-of-backup-file
    Note
    • The backup file must be in .tgz format.
    • A space is required between .bat file and the path to the backup file.
  4. A completion message displays. Click any key to continue.

  5. Close the command prompt window.

    Tip
    • If you do not specify a folder in which to save the file, the system automatically creates a default file in the following location:

      SVP-root\wk\Supervisor\MappIniset\LogsyyyyMMddHHmmss.tgz

      where yyyyMMddHHmmss is the year, month, date, and time that the file was created.

    • The backup file is compressed and uses the .tgz format. Use a tool that supports tar and gzip to extract the data from the .tgz file.
  6. Save the backup file to another computer or external memory device such as a USB flash memory or hard drive.

Restoring HDvM - SN configuration files

You can make a backup copy of the Device Manager - Storage Navigator configuration files on the SVP by downloading them to a folder that you specify. You can then use the backup copy to restore the configuration file if it becomes necessary, or to configure a replacement SVP if one fails.

Before you begin

  • The storage systems registered in the SVP you backed up are registered in a new SVP.
  • The services on the storage system are stopped.

Procedure

  1. Copy the backup file to any folder in the SVP.

  2. Open a command prompt window with administrator permissions.

  3. In the folder where the .bat file is located, enter

    C:\MAPP\wk\Supervisor\MappIniSet>MappRestore.bat absolute-path-of-backup-file
    Note
    • The backup file must be in .tgz format.
    • A space is required between MappRestore.bat and the path to the backup file.
  4. A completion message displays.

  5. Type a key to close the message, and then close the command prompt.

  6. Save the backup file to another computer or external memory device such as USB flash memory or hard drive.

Logging in to Device Manager - Storage Navigator

You can log in to Device Manager - Storage Navigator in different ways.

If you are an administrator, you can log in to Device Manager - Storage Navigator with a one-time only initial login.

If you are a superuser, you can log in first to Device Manager - Storage Navigator to create other user accounts.

If you are a Device Manager - Storage Navigator and storage system user or administrator, you can log in normally.

Initial superuser login

Follow these instructions to log in as a superuser.

When logging on to Device Manager - Storage Navigator for the first time, you must log on as a superuser to set up additional user accounts.

The superuser account has a built-in ID, which includes all permissions, and a default password.

Procedure

  1. Call your local service representative to obtain the superuser ID and default password.

  2. In your web browser, specify the URL for your SVP:

    https://IP-address-or-host-name-of-SVP/sanproject/
    		  
    To change the port number of the protocol from the initial value (443), specify the following URL:
    https://IP-address-or-host-name-of-SVP:port-number-of-the-protocol/
  3. Log in with the superuser ID and password.

  4. To prevent unauthorized use of the superuser account, change the password immediately after you log in. Click Settings User Management Change Password to change your password.

    After you log in, the Device Manager - Storage Navigator main window opens. You can navigate using the menu, tree, or General Tasks. Precise instructions for performing an operation can be found in the software user guides. Also, see Appendixes D through I, which describe the screens in the GUI.

Changing the initial password

After the administrator gives you a user ID and password, you should change the password after you log in.

Procedure

  1. Log in to Device Manager - Storage Navigator with the user ID and password given to you by the administrator.

  2. Click Settings User Management Change Password to change your password.

User login

By logging in, you can manage users and licenses, create a login message, or edit advanced system settings.

Procedure

  1. In your web browser, specify the following URL:

    https://IP-address-or-host-name-of-SVP/sanproject/
  2. The following actions might be required to open the login dialog box, depending on your environment:

    • If a message indicates that the enhanced security configuration is enabled on the management client, select In the future, do not show this message and click OK.
    • If the SVP is set to support SSL-encrypted communication and security messages appear, make sure the certificate is correct and follow the instructions in the dialog box.
    • If a message indicates that certain web sites are blocked, follow instructions in Adding your SVP to the trusted sites zone for Windows Server computers.
  3. Type the user ID and password.

  4. Click Login.

  5. If the Security Information dialog box appears, click Yes.

  6. If a local storage area pop-up dialog box of Adobe Flash Player Setting appears, click Allow to open the Device Manager - Storage Navigator main window. The cache function of Adobe Flash Player optimizes the process of Device Manager - Storage Navigator. Denial of the request might delay the processing speed of Device Manager - Storage Navigator.

    GUID-D973F4D3-3BB2-41A5-AC99-B6317F395A81-low.png

    After you log in, the Device Manager - Storage Navigator main window opens. You can navigate using the menu, tree, or General Tasks. Precise instructions for performing an operation can be found in the software user guides. Also, see Appendixes D through I, which describe the screens in the GUI.

    NoteIf login fails three times with the same user ID, Device Manager - Storage Navigator stops responding for one minute. This is for security purposes and is not a system failure. Wait, then try again. The roles and resource groups for each user are set up ahead of time and will be available to you when you log in to Device Manager - Storage Navigator. If the roles or resource allocations for your username are changed after you log in, the changes will not be effective until you log out and log back in again. When you use a web browser for a long period of time, memory is heavily used. We recommend closing or logging out of Device Manager - Storage Navigator after you are finished using it.

Changing the initial password

After the administrator gives you a user ID and password, you should change the password after you log in.

Procedure

  1. Log in to Device Manager - Storage Navigator with the user ID and password given to you by the administrator.

  2. Click Settings User Management Change Password to change your password.

Adding your SVP to the trusted sites zone for Windows Server computers

If you are using Device Manager - Storage Navigator on a Windows Server computer, the following message may appear during login. If it does, you must add the SVP to the trusted sites zone.

The message below may appear differently depending on the Windows version you are using.

GUID-FDA94125-07E5-4620-B818-883E2BACFFCB-low.png

Procedure

  1. Click Add in the message dialog box. The Trusted Sites dialog box opens.

  2. In Add this web site to the zone, enter the URL of the SVP that you want to log in to. For example, if the host name is host01, the URL is http://host01. If the IP address is 127.0.0.1, the URL is http://127.0.0.1.

  3. Click Add to add the URL of the SVP to the web sites list.

  4. Click Close to close the dialog box.

Device Manager - Storage Navigator secondary windows

The Device Manager - Storage Navigator secondary window runs within the Java Runtime Environment (JRE).

The secondary window opens when you select a menu on the Device Manager - Storage Navigator main window. The following functions and software applications use secondary windows:

  • Authentication function of LUN Manager
  • Login Message function
  • Cache Residency Manager
  • Compatible PAV
  • Compatible XRC
  • Data Retention Utility
  • Server Priority Manager
  • Volume Retention Manager

To use the Device Manager - Storage Navigator secondary window, you must enable it in advance. By default, this setting is disabled. When disabled, these functions and software applications do not appear in the menu on the Device Manager - Storage Navigator main window.

Google Chrome restrictions

Google Chrome shows the message "This type of file can harm your computer. Are you sure you want to download <file name>.jnlp?" when you open the secondary window.

Click Save in the message window and save the object file. Then open the file. Continue the operation though Java security warning is displayed when you open the file.

SJsvlSNStartServlet (<serial number>).jnlp is saved in the download folder. This file is duplicated every time you open the second window because this file is not overwritten or deleted automatically. Delete extraneous downloaded SJsvlSNStartServlet (<serial number>).jnlp files periodically to prevent shortage of disc capacity. To confirm the download location, follow Chrome Menu Settings Show advanced settings Downloads.

Do not click Discard in the message window, or you will be unable to operate for a while until the error (20020-108000) appears. Click OK to close the error and operate again.

If you don't want to wait for the error to appear, close Chrome and log in to Device Manager - Storage Navigator again.

The error also appears if you do not click Save or do not open the saved file for some time.

Enabling the Device Manager - Storage Navigator secondary window

The Device Manager - Storage Navigator secondary window must be enabled before it can be used.

Before you begin

  • You must have Storage Administrator (View Only) role to perform this task.
  • JRE must be installed and configured in a Windows or Unix environment. You can download JRE from http://www.oracle.com/technetwork/java/index.html.
  • Verify that JRE is installed correctly by opening the ControlPanel.html file. It is located in the JRE root directory. If the file opens, JRE is installed correctly.
  • On the JRE of each Device Manager - Storage Navigator computer, Java log file trace and logging must be enabled and caching must be disabled. The Java log file can help you troubleshoot a problem when an application error occurs in the Device Manager - Storage Navigator web client. Disabling the caching feature can help prevent complications when the microcode is updated. See the http://java.sun.com website for more information on configuring JRE through the Java Control Panel.

Procedure

  1. From the Settings menu, click Environmental Settings Edit Information Display Settings. The Edit Information Display Settings window opens.

  2. In the Secondary window field, click Enable.

  3. Click Apply.