Using reports to view storage system information

Last updated
Save as PDF

Device Manager - Storage Navigator can generate reports that contain information about your storage system's physical configurations and logical settings. Reports can cover specific areas of the storage system, such as reporting on configuration, ports, channel board, and disk board. You can save reports as comma-separated-value (CSV) files or as HTML files. Tables in the HTML version of the configuration reports are sortable.

Before making changes to a storage system, generate reports of your storage system’s physical configurations and logical settings. Generate a similar report after the changes, and then compare the reports to verify that new settings were made as intended.

If you log in as the user who created the report, you can download / delete only the report created by the user. If you log in as a user with the Storage Administrator (Initial Configuration) role, you can download / delete the reports created by all users.

Creating configuration reports

You can create and store up to 20 configuration reports for each storage system. There are two types of reports:

Configuration Reports, which are generated in HTML format
Detail Configuration Reports, which are generated in CSV format

Before you begin

You must have the Storage Administrator (Initial Configuration) role to create a configuration report.
Verify that there are less than 20 reports listed on the Reports window. If there are already 20 reports, you must delete one or more existing reports before you can create a new report.

Procedure

If CCI has been used to create parity groups or LDEVs, click File Refresh All to update the configuration information before creating a configuration report.
In the Device Manager - Storage Navigator main menu, click Reports Configuration Report Create Configuration Report.
In the Create Configuration Report window, specify a task name or accept the default task name (yymmdd-CreateConfigurationReport).
This task name is used as the report name in the Reports window.
In the Selected Reports table, select the desired report type: Configuration Reports (HTML) or Detail Configuration Reports (CSV).
If you want the Tasks window to open after you click Apply, select Go to tasks window for status (selected by default).
Click Apply to create the selected report.
The create configuration report process takes approximately 10 minutes to complete.
When the process is complete, the new report is displayed on the Reports window. If necessary, click Refresh to update the list of reports.

Downloading and viewing the HDvM - SN configuration reports

The configuration report created on Device Manager - Storage Navigator (HDvM - SN) can be archived by downloading it to the management client.

Note

Adobe Flash Player is required to display configuration reports created with SVP firmware version 88-06-01 and earlier or 93-02-01 and earlier.
Configuration reports created with SVP firmware version 88-06-0x or later might not be displayed depending on the web browser version on the management client. You must use the latest version of the web browser. (Use the management client running an OS that supports the latest version of the web browser.)
If you use Google Chrome, specify the Start Option –allow-file-access-from-files.
If you use Google Chrome, the window used to specify the folder in which the report will be saved might not appear when downloading the report. In this case, click Chrome Menu Settings Show advanced settings, and then under Privacy clear the check box for Protect you and your device from dangerous sites.

Before you begin

Users can view the reports that they created.
Users who have the Storage Administrator (Initial Configuration) role can view all reports.

Procedure

Expand the Storage Systems tree, and then click Reports.
Specify the report to download.
Click Download Reports.

NoteIf you are running HDvM - SN with Adobe AIR, a character string that depends on the AIR environment is displayed in the title of the download window.
Specify the folder in which to save the .tgz file.
Extract the downloaded .tgz file.
Display the report.
- For HTML reports, open the file extracted-folder\html\index.html.
  The following warning message might appear when you open the HTML file: An ActiveX control on this page might be unsafe to interact with other parts of the page. Do you want to allow this interaction? This message appears when the program embedded in the report accesses a local file. Click Yes to continue the operation.
- For CSV reports, open the CSV file in the folder extracted-folder\csv.

Viewing configuration reports in the Reports window

You can view only HTML format reports in the Reports window.

Note

Adobe Flash Player is required to display configuration reports created with SVP firmware version 88-06-01 or earlier.
If you use Google Chrome, specify the Start Option –allow-file-access-from-files.

Procedure

Expand the Storage Systems tree, and then click Reports.
Click the name of the report to display.
The report is displayed in the Reports window.
In the Reports window, click the name of the report in the list at the left, and then view the report at the right.

Deleting configuration reports

You can delete a configuration report when you no longer need it, or to make room in the Reports window when the number of reports is near the limit (20).

CautionDo not perform Device Manager - Storage Navigator or CCI operations while you are deleting configuration reports. If you perform such operations, deletion of configuration reports might fail.

Before you begin

You must have the Storage Administrator (Initial Configuration) role to delete a configuration report.

Procedure

Expand the Storage Systems tree, and then click Reports.
In the Reports window, select the report to delete, and then click Delete Reports.
In the Delete Reports window, specify a task name or accept the default task name (yymmdd-DeleteReports).
If you want the Tasks window to open after you click Apply, select Go to tasks window for status (selected by default).
Click Apply.

Examples of Device Manager - Storage Navigator storage configuration reports

The Device Manager - Storage Navigator can show configuration reports for your storage system in table, graph, and CSV formats.

The following examples show various storage configuration reports in table, graph, and CSV formats.

Report examples: table view

Some Device Manager - Storage Navigator reports appear in table format.

The following figure provides examples of reports in table format. The icons are displayed before the names of the reports in table view. If the icons are not displayed correctly, update the window. To sort data in table reports, click any column header.

CHAP Users report

Item	Description
Port Location	Name of the port
User Name	Name of the CHAP user for authentication
iSCSI Target Alias	Alias of the iSCSI target
iSCSI Target Name	Name of the iSCSI target

Disk Boards report

Item	Description
DKB	Location of the disk board. "External" is displayed when the storage system has an external storage system. "External (FICON DM)" is displayed when the storage system has volumes for FICON DM.
Module	Module number. A hyphen (-) displays if "DKB" is "External" or "External (FICON DM)".
Number of PGs	The number of the parity groups that the disk board controls. If "DKB" is "External", this item indicates the number of parity groups mapped to external volumes. If "DKB" is "External (FICON DM)", this item indicates the number of parity groups mapped to volumes for FICON DM.
Number of LDEVs (Total)	The number of the logical volumes belonging to the parity groups that the disk board controls.
Number of LDEVs (Unallocated)	The number of the logical volumes that are inaccessible from the host and belong to the parity groups controlled by the disk board.
Total LDEV Capacity (MB)	Total capacity of the logical volumes belonging to the parity groups that the disk board controls.
Unallocated LDEV Capacity (MB)	Total capacity of the logical volumes that are inaccessible from the host and belong to the parity groups controlled by the disk board.

Host Groups / iSCSI Targets report

Item	Description
Port Location	Name of the port
Type	Type of the host group
Host Group Name / iSCSI Target Alias	Name of the host group / alias of the iSCSI target
Host Group ID / iSCSI Target ID	Number of the host group / ID of the iSCSI target
iSCSI Target Name	Name of the iSCSI target
Resource Group Name	Resource Group Name where the host group belongs
Resource Group ID	Resource Group ID where the host group belongs
Number of LUNs	The number of LU paths defined to the host group
Number of LDEVs	The number of logical volumes that are accessible from the hosts in the host group
Number of PGs	The number of parity groups with logical volumes that are accessible from the hosts in the host group
Number of DKBs	The number of disk boards controlling the parity groups where the logical volumes that are accessible from the hosts in the host group belong
Total LDEV Capacity (MB)	Total capacity of the logical volumes accessible from the hosts in the host group. This is the total capacity of LDEVs referred to in "Number of LDEVs".
Port Security	Security of the port
Authentication : Method	iSCSI target method authentication settings CHAP None Comply with Host Setting
Authentication : Mutual CHAP	Enable or disable the iSCSI target mutual CHAP Enabled Disabled
Authentication : User Name	Authenticated iSCSI target user name
Authentication : Number of Users	The number of authenticated users registered in the iSCSI target
Host Mode	Host mode of the host group
Host Mode Option	Host mode option of the host group. Host mode options are separated by semicolons (;) when more than one option is specified.
Number of Hosts	The number of the hosts in the host group.

Hosts report

Item	Description
Port Location	Name of the port
Type	Port type
Port Internal WWN	Port WWN
Port Security	Port security setting
Host Group Name / iSCSI Target Alias	Name of the host group / alias of the iSCSI target
iSCSI Target Name	Name of the iSCSI target
Host Mode	Host mode of the host group
Host Mode Option	Host group host mode option. When more than one host mode option is specified, they are separated by semicolons (;)
Host Name	Name of the host that can access the LU path through the port
HBA WWN / iSCSI Name	Host WWN / host iSCSI name. The name is in 16-digit hex format.

Logical Devices report

Item	Description
LDEV ID	The logical volume number
LDEV Name	The logical volume name
Capacity (MB)	Capacity of the logical volume
Emulation Type	Emulation type of the logical volume
Resource Group Name	Name of the resource group to which the LDEV belongs
Resource Group ID	ID of the resource group to which the LDEV belongs
PG	Number of the parity group to which the LDEV belongs. If the number starts with "E" (for example, E1-1), the parity group contains external volumes. If the number starts with "M" (for example, M1-1), the parity group contains FICON DM volumes. A hyphen (-) is displayed for Dynamic Provisioning and Thin Image V-VOLs.
RAID Level	RAID level of the parity group to which the LDEV belongs¹
Drive Type/RPM	Drive type, drive control name, and revolutions-per-minute (RPM) of the drive of the parity group to which the LDEV belongs. A hyphen (-) is displayed as RPM when the drive is SSD.¹ For VSP E990, this item is displayed as Drive Type/Interface.
Drive Type-Code	Type code of the drives in the parity group to which the logical volume belongs¹
Drive Capacity	Capacity of the drives in the parity group to which the LDEV belongs¹
PG Members	Drive locations of the parity group to which the LDEV belongs¹
Allocated	Information about whether the host can access the LDEV: `Y`: The host can access the volume. `N`: The host cannot access the volume.
SSID	SSID of the LDEV
CVS	Information about whether the LDEV is a custom-size volume
OCS	Oracle checksum
Attribute	Attribute of the LDEV
Provisioning Type	Provisioning type of the LDEV
Pool Name	For V-VOLs of Dynamic Provisioning, the name of the pool related to the logical volume is displayed¹. If the logical volume attribute is Pool, the name of the pool to which the logical volume belongs is displayed. When neither of the above is displayed, the pool name is blank.
Pool ID	ID of the pool indicated by "Pool Name". A hyphen (-) is displayed for volumes other than pool-VOLs or V-VOLs.
Current MPU	Number of the MP unit that currently controls the LDEV
Setting MPU	Number of the MP unit that you specified to control the LDEV
Command Device: Security	Indicates whether Security is specified as the attribute for the command device. A hyphen (-) is displayed when "Attribute" is not "CMDDEV".
Command Device: User Authentication	Indicates whether User Authentication is specified as the attribute for the command device. A hyphen (-) is displayed when "Attribute" is not "CMDDEV".
Command Device: Device Group Definition	Indicates whether Device Group Definition is specified as the attribute for the command device. A hyphen (-) is displayed when "Attribute" is not "CMDDEV".
Encryption	Indicates whether the parity group to which the LDEV belongs is encrypted: For internal volumes: Enabled (encrypted) or Disabled (not encrypted) For external volumes: blank
T10 PI	Indicates the T10 PI attribute set for the LDEV: Enabled Disabled Blank if the emulation type is not OPEN-V
ALUA Mode	Indicates whether the ALUA mode is enabled: Enabled: ALUA mode is enabled. Disabled: ALUA mode is disabled.
Notes: A hyphen (-) is displayed if the LDEV is an external volume.

LUNs report

Item	Description
Port Location	Name of the port
HBA WWN / iSCSI Name	Port WWN or name of the iSCSI (16 digits in hexadecimal)
Port Security	Name of the type of security of the port
Host Group Name / iSCSI Target Alias	Name of the host group or alias of the iSCSI target
iSCSI Target Name	Name of the iSCSI target
Host Mode	Host mode of the host group
Host Mode Option	Host mode option of the host group. Host mode options are separated by semicolons (;) when more than one option is specified.
LUN	Logical unit number
LDEV ID	Logical volume number
Emulation Type	Emulation type of the logical volume
Capacity (MB)	Capacity of the logical volume
Asymmetric Access State	Asymmetric access status: Active/Optimized: Prioritized Active/Non-Optimized: Lower priority

MP Unit report

The following illustration shows an example of an MP unit report. The table following the illustration describes the items in the report.

Item	Description
MP Unit ID	MP unit ID
Auto Assignment	Auto assignment attribute for the MP unit
Number of Resources (LDEV)	The number of logical volumes that the MP unit controls
Number of Resources (Journal)	The number of journals that the MP unit controls
Number of Resources (External Volume)	The number of external volumes that the MP unit controls, including FICON DM volumes
Number of Resources (Total)	The total number of resources that the MP unit controls The sum of "Number of Resources (LDEV)", "Number of Resources (Journal)", and "Number of Resources (External Volume)"

MP unit details report

The following illustration shows an example of an MP unit details report. The table following the illustration describes the items in the report.

Item	Description
MP Unit ID	MP unit ID
Auto Assignment	Auto assignment attribute for the MP unit
Resource ID	ID of this resource that the MP unit controls
Resource Name	The name of the resource that the MP unit controls. If "Type" is LDEV, the LDEV name that is set is displayed. A hyphen (-) displays for journal volumes or external volumes.
Type	The type of the resource that the MP unit controls

Parity Groups report

Item	Description
PG	Parity group number If the number starts with "E" (for example, E1-1), the parity group contains external volumes (Hitachi Universal Volume Manager User Guide). If the number starts with "M" (for example, M1-1), the parity group contains volumes for FICON DM.
DKB	Name of the disk board that controls the parity group¹
RAID Level	RAID level of the parity group¹
Resource Group Name	Name of the resource group in which the parity group belongs
Resource Group ID	ID for the resource group in which the parity group belongs
Emulation Type	Emulation type of the parity group
Number of LDEVs (Total)	The number of the logical volumes in the parity group
Number of LDEVs (Unallocated)	The number of the logical volumes in the parity group that the host cannot access
Total LDEV Capacity (MB)	Capacity of the logical volumes in the parity group
Unallocated LDEV Capacity (MB)	Capacity of the logical volumes in the parity group that the host cannot access
Drive Type-Code	The type code of the drive in the parity group. The type code of the first drive in the parity group. If the parity group contains external volumes, the drive type code displays the vendor, the model, and the serial number of the storage system. Separated by semicolons (;) if multiple drive types are set.
Drive Type/Interface/RPM	Drive type, drive control name, and revolutions-per-minute (RPM) of the drive in the parity group where the LDEV belongs¹ A hyphen (-) is displayed instead of the RPM when the drive is an SSD or FMD. For VSP E990, this item is displayed as Drive Type/Interface.
Drive Capacity	Capacity of the drive in the parity group¹
RAID Concatenation #0	The number indicating a parity group #0 connected to this parity group^1,2
RAID Concatenation #1	The number indicating a parity group #1 connected to this parity group^1,2
RAID Concatenation #2	The number indicating a parity group #1,2 connected to this parity group^1,2
Encryption	Indicates whether the parity group is encrypted. For internal volumes: Enabled (encrypted) or Disabled (not encrypted) For external volumes: A hyphen (-) is displayed
Accelerated Compression	Accelerated compression of the parity group If accelerated compression is supported, Enabled or Disabled is displayed. If accelerated compression is not supported, a hyphen (-) is displayed.
Notes: A hyphen is displayed if the parity group contains external volumes. A hyphen is displayed if the parity group is not connected with another parity group or if the parity group contains external volumes including volumes for FICON DM.

PDEVs report

The following table describes the items in the PDEVs report.

Item	Description
Location	PDEV name
CR#	C# and R# (2-digit hexadecimal numbers that identify the PDEV Output in the format XX/YY, where: XX: C# YY: R#
PG	PDEVs parity group
Emulation Type	PDEVs emulation type
Drive Type	PDEVs drive type Output example: HDD, FMD DC2, SCM, SSD
Interface	PDEVs control type Output example: SAS, SATA, NVMe
RPM	Revolutions per minute Output example: 7200, 10000, 15000 A hyphen (-) indicates that the drive is not a hard disk drive (HDD).
Drive Type-Code	Drive type code of the drive to which the parity group belongs Output example: SLB5E-M19RSS;SLB5G-M19RSS If multiple drive types are configured, they are separated by semicolons (;).
Drive Size	Drive size (inches) Output example: 2.5, 3.5
Drive Capacity	Physical drive capacity (GB or TB)
Drive Version	Drive firmware version
DKB1	Name of the DKB1 controlling the PDEV
DKB2	Name of the DKB2 controlling the PDEV
DKB3	Name of the DKB3 controlling the PDEV
DKB4	Name of the DKB4 controlling the PDEV
Serial Number#	Serial number of this PDEV
RAID Level	RAID level of PDEVs Output example: RAID1(2D+2D), RAID5(7D+1P), RAID6(14D+2P)
RAID Concatenation#0	Number of parity group (#0) being concatenated to Physical drive Output example: 2-1, 3-1, 4-1
RAID Concatenation#1	Number of parity group (#1) being concatenated to Physical drive Output example: 2-1, 3-1, 4-1
RAID Concatenation#2	Number of parity group (#2) being concatenated to Physical drive Output example: 2-1, 3-1, 4-1
Resource Group Name	Name of the resource group to which the PDEV parity group belongs
Resource Group ID	ID of the resource group to which the PDEV parity group belongs (0 to 1023, decimal number)
Encryption	Encryption status of the parity group to which the PDEV belongs: Enabled: Encryption is enabled Disabled: Encryption is disabled

Ports report

Item	Description
CHB	Name of the channel board
Type	Package type of the channel board
Port Location	Name of the port on the channel board
iSCSI Virtual Port Mode	Mode of the iSCSI virtual port
TCP Port Number	Port number to use for a socket (decimal)
Internal WWN / Internal iSCSI Name	WWN / iSCSI name of the port
Fabric	One of the Fibre topology settings indicating the setting status of the Fabric switch
Connection Type	One of the Fibre topology settings Point to Point FC-AL
IPv4 : IP Address	IPv4 address of the port Output example: 192.168.0.100
IPv4 : Subnet Mask	IPv4 subnet mask of the port Output example: 255.255.255.0
IPv4 : Default Gateway	IPv4 default gateway of the port Output example: 255.255.255.0
IPv6 : Mode	IPv6 settings of the port Enabled Disabled
IPv6 : Link Local Address	IPv6 link local address of the port (16-digit hexadecimal)
IPv6 : Global Address	IPv6 global address of the port. Output example: `xxxx`:`xxxx`:`xxxx`:`xxxx`:`xxxx`:`xxxx`:`xxxx`:`xxxx` (hexadecimal)
IPv6 : Global Address 2	IPv6 global address 2 of the port. Output example: `xxxx`:`xxxx`:`xxxx`:`xxxx`:`xxxx`:`xxxx`:`xxxx`:`xxxx` (hexadecimal)
IPv6 : Assigned Default Gateway	Assigned IPv6 default gateway
Selective ACK	Selective ACK mode Enabled Disabled
Ethernet MTU Size (Byte)	MTU settings (binary) 1,500
Keep Alive Timer	iSCSI keep alive timer (0 to 64,800) (sec)
VLAN : Tagging Mode	Tagging mode of VLAN Enabled Disabled
VLAN : ID	Number of VLAN set to the port (1 to 4,094)
CHAP User Name	User name for the CHAP authentication
iSNS Server : Mode	iSNS mode settings ON OFF
iSNS Server : IP Address	IP address of the iSNS server (30 to 65,535)
iSNS Server : TCP Port Number	Number of the TCP port used in iSNS (binary)
Address (Loop ID)	Fibre port address and Loop ID of the port
Port Security	Security of the port Enabled Disabled
Speed	Data transfer speed of the port
SFP Data Transfer Rate	Maximum transfer rate of SFP which the mounted package supports. 10G 16G 32G A hyphen (-) is displayed if Type is 10iSCSI2c (CHB)).
T10 PI Mode	Indicates whether the T10 PI mode can be applied to the port. Enabled Disabled Blank if the port type is a Fibre port other than 16FC2(CHB). For iSCSI ports, a hyphen (-) is displayed.
Resource Group Name	Name of the resource group to which the port belongs
Resource Group ID	ID for the resource group to which the port belongs (0 to 1023)
Number of Hosts	The number of the hosts registered to the port
Number of LUNs	The number of the LU paths defined to the port
Number of LDEVs	The number of the logical volumes that can be accessed through the port
Number of PGs	The number of the parity groups having the logical volumes that can be accessed through the port
Number of DKBs	The number of the disk boards controlling the parity group that contains the logical volumes that can be accessed through the port

Power Consumption report

No records are created if the storage system is turned off. If the system is in maintenance mode or the SVP is rebooted, up to two hours of records could be lost.

If a failure occurs in the storage system, the correct information might not be output.

A hyphen(-) is displayed if the power and temperature information cannot be acquired due to a unit or network failure.

Item	Description
Power Consumption Average (W)	Average of the power consumption
Power Consumption Maximum (W)	Maximum of the power consumption
Power Consumption Minimum (W)	Minimum of the power consumption
TEMP:HSNBX0-HSNPANEL0 Average (degrees C)	Average temperature of HSNBX0:HSNPANEL0
TEMP:HSNBX0-HSNPANEL0 Maximum (degrees C)	Maximum temperature of HSNBX0:HSNPANEL0
TEMP:HSNBX0-HSNPANEL0 Minimum (degrees C)	Minimum temperature of HSNBX0:HSNPANEL0
TEMP:HSNBX1-HSNPANEL1 Average (degrees C)	Average temperature of HSNBX1:HSNPANEL1
TEMP:HSNBX1-HSNPANEL1 Maximum (degrees C)	Maximum temperature of HSNBX1:HSNPANEL1
TEMP:HSNBX1-HSNPANEL1 Minimum (degrees C)	Minimum temperature of HSNBX1:HSNPANEL1
TEMP:DKC0-Cluster1 Average (degrees C)	Average temperature of DKC0:CL1
TEMP:DKC0-Cluster1 Maximum (degrees C)	Maximum temperature of DKC0:CL1
TEMP:DKC0-Cluster1 Minimum (degrees C)	Minimum temperature of DKC0:CL1
TEMP:DKC0-Cluster2 Average (degrees C)	Average temperature of DKC0:CL2
TEMP:DKC0-Cluster2 Maximum (degrees C)	Maximum temperature of DKC0:CL2
TEMP:DKC0-Cluster2 Minimum (degrees C)	Minimum temperature of DKC0:CL2

Power Consumption report
Item	Description
TEMP:DB00-DBPS00-1 Average (Temperature in degrees C) TEMP:DB00-DBPS00-1 Maximum (Temperature in degrees C), TEMP:DB00-DBPS00-1 Minimum (Temperature in degrees C), TEMP:DB00-DBPS00-2 Average (Temperature in degrees C), TEMP:DB00-DBPS00-2 Maximum (Temperature in degrees C), TEMP:DB00-DBPS00-2 Minimum (Temperature in degrees C)	Average temperature, maximum temperature, and minimum temperature of the DB for the two-hour period. Outputs in the following format: TEMP:DB XX -DBPS XX -CL Average, Maximum, or Minimum (Temperature in degrees Celsius) XX: DB number 00 to 07 (VSP F350, VSP G350) 00 to 11 (VSP F370, VSP G370) 00 to 47 (VSP F700, VSP F900, VSP G700, VSP G900) 00 to 03 (VSP E990) CL: Cluster number (1 or 2)

Spare Drives report

Item	Description
Drive Capacity	Capacity of the spare drive
Drive Type-Code	Type code of the spare drive
Location	Location of the spare drive

SSD Endurance report

Item	Description
Drive Type-Code	Type code of the drive
Drive Capacity	Capacity of the drive
Location	Location of the drive
Used Endurance Indicator (%)	The used endurance of SSD life (0 to 100) The value of this indicator increases due to drive operation associated with internal processing of the storage system, and the host I/O. Even when no data is copied due to a drive failure, the value of this indicator increases because the spare drive also performs internal processing.

Storage System Summary report

Item	Description
Storage System Type	Type of the storage system.
Serial Number	Serial number of the storage system.
IP Address	IP address of the SVP.
Software Versions	Version of the following programs. DKCMAIN HTP ISCF FCBK ISW DKB DKBN SVP CBA SSVP GUM FCDG ROMBOOT RAMBOOT Expander NSW CONFIG CFM HDD HDD (SVP) Printout Tool EDKBN
Number of CUs	The number of control units in the storage system
Shared Memory Size (GB)	Shared memory capacity Includes the cache management information (directory)
Cache Size (GB)	Cache capacity
Number of DKBs	The number of disk boards on the module
System Options	List of the system options specified for the storage system
Drive Capacity (TB)	Total capacity of drives in the storage system except for external volumes
Spare Drive Capacity (TB)	Total capacity of the spare drives in the storage system
Free Drive Capacity(TB)	Total capacity of the free drives in the storage system
OPEN Volume Capacity (GB) ¹	List of the capacity of the open volumes
M/F Volume Capacity (GB) ¹	The list of the capacity of the mainframe volumes and multi-platform volumes
Number of LDEVs¹	List of the numbers of the volumes in the following status. allocated unallocated reserved free The list for open-systems and the list for mainframe-systems are separate.
Notes: You cannot sort this list.

Report examples: graphical view

Some Device Manager - Storage Navigator reports appear in graphical format.

The reports described in this topic display as graphics. icons are displayed before the names of reports in graphical view. If the icons or graphics are not displayed properly, update the window.

Cache Memories report

This report shows cache memory data, including shared memory, main board, and DIMM capacity. The total cache memory is displayed for each module.

Cache Memories report (VSP F700, VSP G700)

Cache Memories report (VSP F900, VSP G900)

Channel Adapters report

This report shows the channel boards and the ports, and also indicates the type of channel adapters for each port. The keys (green = installed, gray= not installed) show which channel adapters are installed and which are not installed.

Physical View report

This report shows disk controller chassis and drive boxes, and includes channel boards, disk boards, data drives, spare drives, and free drives.

It also shows the storage system type, serial number, and software version. You can check the legend for disk units, such as SAS, SSD, Spare, Free, or Not Installed.

If a PCIe channel board installed in the DKC is connected to a channel board box, the status of the channel board box is displayed.

Physical View report (when a channel board box is connected)

Report examples: CSV files

Some Device Manager - Storage Navigator reports appear in CSV format.

This topic describes reports that are saved in CSV format.

AllConf.csv

This is the concatenated file of all the csv files.

CacheInfo.csv

This CSV file contains information about cache packages. A record is created for each cache package.

CacheInfo.csv file (Title: <<Cache>>)
Item	Content
Module#	Module number
Cache Location	Name of cache package
CM DIMM Size (GB)	Capacity of one CM DIM in cache package (in GB)
Cache Size (GB)	Total cache capacity of this package (in GB)
SM Size (GB)	Shared memory capacity (in GB). Includes the cache management information (directory). Output only when Cache Location is CACHE-1CA or CACHE-2CA. Blank displays in other cases.
Cache Residency Size (MB)	Capacity allocated to the cache package for Cache Residency Manager (in MB). Output only when Cache Location is CACHE-1CA or CACHE-2CA. Blank displays in other cases.
CFM Size (GB)	Backup package CFM capacity (in GB)

ChapUserInfo.csv

This CSV file contains information about the iSCSI CHAP authenticated user registered to the port in the channel board. A record is created for each target related to the CHAP authenticated user.

Item	Content
Port	Port name
User Name	Name of the CHAP authenticated user¹
iSCSI Target ID²	The iSCSI number of the target (00 to fe, hexadecimal)
Notes: If the character string contains a comma, the comma is converted to a tab. For the target information, see the record information with the same iSCSI target ID in IscsiTargetInfo.csv.

ChaStatus.csv

This CSV file contains information about the status of each channel board (CHB). A record is created for each CHB.

Item	Content
CHB Location	CHB name
PCB Status	Status of this CHB*
Port#00, #01, …, #03	Status of ports on this CHB*
* 1: Normal, 0: Abnormal

DcrInfo.csv

This CSV file contains information about Cache Residency Manager. A record is created for each logical volume for which Cache Residency Manager is set.

DcrInfo.csv file (Title: <<DCR Information>>)
Item	Content
HDEV#	ID of the logical volume for which Cache Residency Manager is set. "No Install BIND/PRIO Extent" displays if Cache Residency Manage is not set.
Type	Cache Residency Manager type. BIND PRIO
From	Start slot for Cache Residency Manager.
To	End slot for Cache Residency Manager
PreStaging Request	Information about whether data is the target of prestaging or not. On Off

DeviceEquipInfo.csv

This CSV file contains information about equipment and devices that are part of the storage system, including power supplies and batteries for DKC, DB, and CHBB. A record is created for each device.

Item	Content
Device Location	Device location name. For example: For DKCPS: DKCPS-00 For DKUPS: DKUPS000-1 For Battery: BATTERY-1BA For SVP: SVP-BASIC
Equip Status	Equipment status of the device: Equipped Not Equipped
Status	Status of the device: Normal Abnormal Blank if "Equip Status" is Not Equipped

DkaInfo.csv

This CSV file contains information about disk adapters (DKAs). A record is created for each DKA.

DkaInfo.csv file (Title: <<DKA Information>>)
Item	Content
Module #	Module number
DKA Location	DKA name
Package Type	DKA type Example: DKA (4Port)

DkaStatus.csv

This CSV file contains information about the status of disk adapters (DKAs). A record is created for each DKA.

DkaStatus.csv file (Title: <<DKA Status>>)
Item	Content
Module #	Module number
DKA Location	DKA name
PCB Status	Status of this DKA¹
BECON#00, #01	Status of BECON on this DKA²
BEPORT#0000, #0001, …, #0103.	Status of BEPORT on this DKA.² Items are output in the format of "BEPORT#XXYY". XX: BE controller number (2-digit hexadecimal (00 to 01)) YY: BE port number (2-digit hexadecimal (00 to 03))
DRR#00, #01.	Status of DRR on this DKA²
DMA#00, #01, …, #03	Status of DMA on this DKA²
Notes: 1: Normal, 0: Abnormal 1: Normal, 0: Abnormal, Blank: Not installed

DkcInfo.csv

This CSV file contains information about DKC. A record is created for each module.

When Module #1 is not installed, the record for Module #1 is not created.

DkcInfo.csv file (Title: <<DKC Information>>)
Item	Content
Storage System Type	Storage system type.
Serial Number #	Serial product number (in the decimal format, from 1 to 99999)
IP Address	IP address¹ Output example: xxx.xxx.xxx.xxx (xxx is in decimal format)
Subnet Mask	Subnet mask¹ Output example: xxx.xxx.xxx.xxx (xxx is in decimal format)
Number of CUs	Number of CUs (number in the decimal format)^¹
Number of DKAs	Number of DKAs (number in the decimal format)²
Configuration Type	Configuration type¹ Output example: PCM
Module #	Module number
Notes: The same value is output for Module #0 and #1. Different values are output for Module #0 and #1.

DkuTempInfo.csv

This CSV file contains information about DB temperature for every two hours. The acquisition interval of temperature data cannot be changed from two hours. A record is DB temperature information obtained from the environment monitor. A record output to the first line shows the latest temperature information. Because DB temperature information is measured by DBPS, items are displayed in this unit*.

DkuTempInfo.csv shows the average temperature as DB temperature data. The total number of items is 1153.

The DB temperature data displayed in DkuTempAveInfo.csv (average temperature only), DkuTempMaxInfo.csv (maximum temperature only), and DkuTempMinInfo.csv (minimum temperature only) is the same value as the DB temperature data for DkuTempInfo.csv.

No records are created if the DKC is turned off. If the system is in maintenance mode or the SVP is rebooted, the data that is output every two hours might not contain data for the period.

If a failure occurs in the storage system, the correct information might not be output.

DkuTempInfo.csv file (Title: <<DKU temperature Information>>)
Item	Description
Date	Year, month, and date when temperature data was acquired in the format: YYYY/MM/DD hh:mm:ss
DKU00 DB000 DBPS0001 Temperature average	Average temperature (°C) for the two-hour period of DKU00 DB000 DBPS0001
DKU00 DB000 DBPS0001 Temperature maximum value	Maximum temperature (°C) for the two-hour period of DKU00 DB000 DBPS0001
DKU00 DB000 DBPS0001 Temperature minimum value	Minimum temperature (°C) for the two-hour period of DKU00 DB000 DBPS0001
DKU27 DB191 DBPS1912 Temperature average	Average temperature (°C) for the two-hour period of DKU27 DB191 DBPS1912
DKU27 DB191 DBPS1912 Temperature maximum value	Maximum temperature (°C) for the two-hour period of DKU27 DB191 DBPS1912
DKU27 DB191 DBPS1912 Temperature minimum value	Minimum temperature (°C) for the two-hour period ofDKU27 DB191 DBPS1912

Note: An item name is displayed as "DKU DByyy DBPSyyya" or "DKUxx DByyy&zzz DBPSyyya".

DKUxx: DKU location number (decimal)
DByyy or DByyy&zzz: DB location number
The display format of DB location numbers differs depending on the type of DB.
- DByyy: DBL location number (decimal)
- DByyy&zzz: Location number of DBS2, DBF3, or DBN (decimal)
  Two DB numbers are written together, and then displayed as one DB location.
DBPSyyya: DBPS location number
- yyy: DB location number (decimal)
- a: DBPS number (1, 2)

The following table shows the locations and values for DKUxx, DByyy, and DByyy&zzz.

If DB is not implemented, the item name is displayed with the same as DBL, and the data part is blank. In the case of DBS2, DBF3, and DBN, the data of the same item is displayed twice in duplicate by DB location.

DKU #	0	1	2	3	4	5
`x`	0	1	0	1	0	1
`y`	0	0	1	1	2	2
DKU`xy`	DKU00	DKU10	DKU01	DKU11	DKU02	DKU12
DKUPS`xyzc`	DKU00`zc`	DKU10`zc`	DKU01`zc`	DKU11`zc`	DKU02`zc`	DKU12`zc`

DKU #	6	7	8	9	10	11
`x`	0	1	0	1	0	1
`y`	3	3	4	4	5	5
DKU`xx`	DKU03	DKU13	DKU04	DKU14	DKU05	DKU15
DKU`xxy`	DKU03`zc`	DKU13`zc`	DKU04`zc`	DKU14`zc`	DKU05`zc`	DKU15`zc`

The following tables list DKUPSxyzc: zc values (where DKC# is 0 and xy is 00)

DKU location number	DKU location number (DBS2/DBF3/DBN)
DKU00	DB000&001	DB002&003	DB004&005	DB006&007
DKU01	DB008&009	DB010&011	DB012&013	DB014&015
DKU26	DB176&177	DB178&179	DB180&181	DB182&183
DKU27	DB184&185	DB186&187	DB188&189	DB190&191

DKU location number	DKU location number (DBS2/DBF3/DBN)
DKU00	DB000	DB001	DB002	DB003	DB004	DB005	DB006	DB007
DKU01	DB008	DB09	DB010	DB011	DB012	DB013	DB014	DB015
DKU26	DB176	DB177	DB178	DB179	DB180	DB181	DB182	DB183
DKU27	DB184	DB185	DB186	DB187	DB188	DB189	DB190	DB191

A hyphen(-) is displayed if the power and temperature information cannot be acquired due to a unit or network failure.

DkuTempAveInfo.csv

DkuTempAveInfo.csv shows the average temperature as DB temperature data. The total number of items is 385.

No records are created if the DKC is turned off. If the system is in maintenance mode or the SVP is rebooted, the data that is output every two hours might not contain data for the period.

If a failure occurs in the storage system, the correct information might not be output.

DkuTempAveInfo.csv file (Title: <<DKU temperature average value Information>>)
Item	Description
Date	Year, month, and date when temperature data was acquired in the format: YYYY/MM/DD hh:mm:ss
DKU00 DB000 DBPS0001 Temperature average	Average temperature (°C) for the two-hour period of DKU00 DB000 DBPS0001
DKU27 DB191 DBPS1912 Temperature average	Average temperature (°C) for the two-hour period of DKU27 DB191 DBPS1912

Note: An item name is displayed as "DKU DByyy DBPSyyya" or "DKUxx DByyy&zzz DBPSyyya".

DKUxx: DKU location number (decimal)
DByyy or DByyy&zzz: DB location number
The display format of DB location numbers differs depending on the type of DB.
- DByyy: DBL location number (decimal)
- DByyy&zzz: Location number of DBS2, DBF3, or DBN (decimal)
  Two DB numbers are written together, and then displayed as one DB location.
DBPSyyya: DBPS location number
- yyy: DB location number (decimal)
- a: DBPS number (1, 2)

See DkuTempInfo.csv for locations and values for DKUxx, DByyy, and DByyy&zzz.

A hyphen(-) is displayed if the power and temperature information cannot be acquired due to a unit or network failure.

DkuTempMaxInfo.csv

DkuTempMaxInfo.csv shows the maximum temperature as DB temperature data. The total number of items is 385.

No records are created if the DKC is turned off. If the system is in maintenance mode or the SVP is rebooted, the data that is output every two hours might not contain data for the period.

If a failure occurs in the storage system, the correct information might not be output.

DkuTempMaxInfo.csv file (Title: <<DKU temperature maximum value Information>>)
Item	Description
Date	Year, month, and date when temperature data was acquired in the format: YYYY/MM/DD hh:mm:ss
DKU00 DB000 DBPS0001 Temperature maximum value	Maximum temperature (°C) for the two-hour period of DKU00 DB000 DBPS0001
DKU27 DB191 DBPS1912 Temperature maximum value	Maximum temperature (°C) for the two-hour period of DKU27 DB191 DBPS1912

Note: An item name is displayed as "DKU DByyy DBPSyyya" or "DKUxx DByyy&zzz DBPSyyya".

DKUxx: DKU location number (decimal)
DByyy or DByyy&zzz: DB location number
The display format of DB location numbers differs depending on the type of DB.
- DByyy: DBL location number (decimal)
- DByyy&zzz: Location number of DBS2, DBF3, or DBN (decimal)
  Two DB numbers are written together, and then displayed as one DB location.
DBPSyyya: DBPS location number
- yyy: DB location number (decimal)
- a: DBPS number (1, 2)

See DkuTempInfo.csv for locations and values for DKUxx, DByyy, and DByyy&zzz.

A hyphen(-) is displayed if the power and temperature information cannot be acquired due to a unit or network failure.

DkuTempMinInfo.csv

DkuTempMinInfo.csv shows the minimum temperature as DB temperature data. The total number of items is 385.

No records are created if the DKC is turned off. If the system is in maintenance mode or the SVP is rebooted, the data that is output every two hours might not contain data for the period.

If a failure occurs in the storage system, the correct information might not be output.

DkuTempMinInfo.csv file (Title: <<DKU temperature minimum value Information>>)
Item	Description
Date	Year, month, and date when temperature data was acquired in the format: YYYY/MM/DD hh:mm:ss
DKU00 DB000 DBPS0001 Temperature minimum value	Minimum temperature (°C) for the two-hour period of DKU00 DB000 DBPS0001
DKU27 DB191 DBPS1912 Temperature minimum value	Minimum temperature (°C) for the two-hour period of DKU27 DB191 DBPS1912

Note: An item name is displayed as "DKU DByyy DBPSyyya" or "DKUxx DByyy&zzz DBPSyyya".

DKUxx: DKU location number (decimal)
DByyy or DByyy&zzz: DB location number
The display format of DB location numbers differs depending on the type of DB.
- DByyy: DBL location number (decimal)
- DByyy&zzz: Location number of DBS2, DBF3, or DBN (decimal)
  Two DB numbers are written together, and then displayed as one DB location.
DBPSyyya: DBPS location number
- yyy: DB location number (decimal)
- a: DBPS number (1, 2)

See DkuTempInfo.csv for locations and values for DKUxx, DByyy, and DByyy&zzz.

A hyphen(-) is displayed if the power and temperature information cannot be acquired due to a unit or network failure.

ELunInfo.csv

This CSV file contains information about external volumes. Information about one external volume is output to multiple records according to the number of prioritized paths between the local and the external storage systems.

For details about external volumes, see the Hitachi Universal Volume Manager User Guide.

Item	Content
VDEV#	Virtual device number to which the external volume is mapped
Characteristic1	Identification number of the external volume If the character string contains a comma, the comma is converted to a tab.
Characteristic2	Extended information for identifying the external volume
Device	Product name reported to the host by the external volume If the character string contains a comma, the comma is converted to a tab.
Capacity(blocks)	Capacity of the external volume (in blocks)
Cache Mode	Indicates whether the write data from the host to the external storage system is reflected synchronously or asynchronously Enabled: Asynchronously Disabled: Synchronously
ECC Group	Number of parity group to which the external volume is mapped. If the number starts with "E" (for example, E1-1), the parity group contains external volumes. Range of values: E1-1 to E16384-4096
Current MPU	Number and name of a current MP unit controlling the parity group to which the external volume is mapped MPU-10 MPU-20
Setting MPU	Number and name of an MP unit configured to control the external volume indicated by ECC Group MPU-10 MPU-20
Vendor	Vendor name of the external storage system
Product Name	Product name of the external storage system
Serial Number#	Serial product number of the external storage system
Path Mode	Mode which indicates how the paths between local and external storage systems operate Multi Single ALUA
Port	Name of a local port from which the external path is connected to the external storage system
WWN	Port identifier number of the external storage system This item is blank when the "Package Type" is iSCSI.
LUN	LU number set for the external volume.
Priority	Priority of the paths between the storage systems to be used for connection with the external volume. "1" indicates the path with the highest priority.
Status	Status of the path between storage systems. Normal Blocked
IO TOV	I/O timeout value for the external volume Range of values: 5 to 240
QDepth	The number of Read/Write commands that can be issued to the external volume at a time Range of values: 2 to 128
Resource Group ID (ECC Group)	Resource group ID for the parity group that is mapping external volumes (in decimal format) Range of values: 0 to 1023
Resource Group Name (ECC Group)	Resource group name of the parity group that is mapping external volumes
Load Balance Mode	I/O load balance distribution logic specified for external volume: Normal Round-robin Extended Round-robin Disabled - (hyphen): Single is specified in Path Mode.
Path Mode on Profile	Path mode on profile information of the external storage system: Multi Single
ALUA Settable	Indicates whether ALUA mode can be set as path mode on the external storage system Yes: ALUA mode can be set No: ALUA mode cannot be set
ALUA Permitted	Indicates whether ALUA is used as path mode on the local storage system: Enabled: ALUA mode is used Disabled: ALUA mode is not used
Target Port Asymmetric Access State	Status of the port on the external storage system when the path mode is ALUA: Active/Optimized Active/Non-Optimized Blank: The path mode is other than ALUA.
Package Type	Type of CHB to which a port of the local storage system connecting to the external storage system belongs: Output example for FC: 16FC2 (CHB), 32FC4R (CHB) Output example for iSCSI: 10iSCSI2o (CHB), 10iSCSI2c (CHB)
IP Address	IP address for an iSCSI target of an external storage system IPv6: `XXXX`:`XXXX`:`XXXX`:`XXXX`:`XXXX`:`XXXX`:`XXXX`:`XXXX` (hexadecimal) IPv4: `XXX`.`XXX`.`XXX`.`XXX` (decimal) Blank: The "Package Type" is other than iSCSI.
TCP Port Number	TCP port number (1 through 65535) for the iSCSI target of an external storage system This item is blank when the "Package Type" is other than iSCSI.
iSCSI Target Name	iSCSI target name of an external storage system This item is blank when the "Package Type" is other than iSCSI.
Virtual Port ID	Virtual port number of own storage system to which external storage system is connected. If Virtual Port Mode is Disabled, this column to be blanked.

EnvMonInfo.csv

This CSV file contains information about the power and temperature of the storage system. Power and temperature measurements from the environment monitor are recorded every two hours.

No records are created if the DKC is turned off. If the system is in maintenance mode or the SVP is rebooted, up to two hours of records could be lost.

If a failure occurs in the storage system, the correct information might not be output.

Item	Description
Date	Year, month, and date when record data was acquired for the two-hour period in the format: `YYYY`/`MM`/`DD` `HH`:`MM`:`SS`
Electric power average	Average value of electric power (W)
Electric power maximum value	Maximum value of electric power (W)
Electric power minimum value	Minimum value of electric power (W) In the following cases, a lower value might be temporarily displayed: When the storage system is starting up Right after replacing storage system parts During or after microcode update
DKC0 CLT01 Temperature average	DKC0: Average temperature of CLT01 (°C)
DKC0 CLT01 Temperature maximum value	DKC0: Maximum temperature of CLT011 (°C)
DKC0 CLT01 Temperature minimum value	DKC0: Minimum temperature of CLT01 (°C)
DKC5 CLT52 Temperature average	DKC5 CLT52: Average temperature of CL2 (°C)
DKC5 CLT52 Temperature maximum value	DKC5 CLT52: Maximum temperature of CL2 (°C)
DKC5 CLT52 Temperature minimum value	DKC5 CLT52: Minimum temperature of CL2 (°C)

A hyphen(-) is displayed if the power and temperature information cannot be acquired due to a unit or network failure.

HSNBXTempInfo.csv

This CSV file contains information about HSNBX temperature for every two hours. The acquisition interval of temperature data cannot be changed from two hours. A record is HSNBX temperature information obtained from the environment monitor. A record output to the first line shows the latest temperature information.

No records are created if the DKC is turned off. If the system is in maintenance mode or the SVP is rebooted, up to two hours of records could be lost.

If a failure occurs in the storage system, the correct information might not be output.

Item	Description
Date	Year, month, and date when record data was acquired for the two-hour period in the format: `YYYY`/`MM`/`DD` `HH`:`MM`:`SS`
HSNBX0 HSNPANEL0 Temperature average	HSNBX0: Average temperature of CLT01 (°C)
HSNBX0 HSNPANEL0 Temperature maximum value	HSNBX0: Maximum temperature of CLT011 (°C)
HSNBX0 HSNPANEL0 Temperature minimum value	HSNBX0: Minimum temperature of CLT01 (°C)
HSNBX1 HSNPANEL1 Temperature average	HSNBX1: Average temperature of CL2 (°C)
HSNBX1 HSNPANEL1 Temperature maximum value	HSNBX1: Maximum temperature of CL2 (°C)
HSNBX1 HSNPANEL1 Temperature minimum value	HSNBX1: Minimum temperature of CL2 (°C)

A hyphen(-) is displayed if the power and temperature information cannot be acquired due to a unit or network failure.

FcSpNameInfo.csv

This CSV file contains information about Fibre Channel Security Protocols (FCSPs). A record is created for each initiator (host).

For details of port setting, see the Provisioning Guide.

Item	Content
Port	Port name
Host Group	Host group name
Target Username	WWN information about the storage system required for authentication (16-digit hexadecimal number)
Authentication of Group	Information about whether to perform authentication or not Enabled Disabled
Initiator Username	WWN information about the host required for authentication (16-digit hexadecimal number)
Protocol	Protocol used for authentication ("CHAP" or blank)

FcSpPortInfo.csv

This CSV file contains information about ports related to Fibre Channel Security Protocols (FCSPs). A record is created for each port.

For details of port setting, see the Provisioning Guide.

Item	Content
Port	Port name
Time out(Sec)	Time interval (in seconds) before retrying authentication in case of failure in authentication
Refusal Intvl.(Min)	Time interval (in minutes) before starting next authentication in case of failure in authentication for the number of times displayed by "Refusal Freq(Counts)"
Refusal Freq.(Counts)	Number of times of authentication allowable for connection to a port
Switch Port Username	WWN information about the Fabric switch required for authentication (16-digit hexadecimal number)
Mode	Mode of authentication between ports and FC switches Bidirectional Unidirectional
Authentication of Fabric Switch	Information about whether to perform authentication of the FC switch identified by "Switch Port Username" Enabled Disabled

HduInfo.csv

This CSV file contains information about hard drive boxes (DB). A record is created for each drive box.

Item	Description
DB Location	DB location name
DB Status	Information about whether this DB is installed Installed Not installed
Slot Size	Slot size (inches) 2.5 3.5 Blank for DBF (FMD or FMD DC2).
DB Type	DB type DBS (DB for 2.5-inch drives) DBL (DB for 3.5-inch drives) DB60 (dense drive box for 3.5-inch drives) DBF (DB for FMD or FMD DC2, 2PORT) DBN (DB for 2.5-inch NVMe drives)

IscsiHostInfo.csv

This CSV file contains information about iSCSI Initiator (Host) set to the channel board port. A record is created for each iSCSI Host (Initiator) target.

Item	Content
Port	Port name
iSCSI Name	iSCSI host name
Host Name	Nickname for iSCSI host name
iSCSI Target ID¹	iSCSI target number (hexadecimal format, 00 to fe)
Notes: For the target information, see the record information with the same iSCSI target ID in IscsiTargetInfo.csv.

IscsiPortInfo.csv

This CSV file contains information about iSCSI information set to the channel board port. A record is created for each iSCSI host (initiator) target.

Item	Content
Port	Port name
IPv4 \| IP Address	IPv4 address Output example: `xxx.xxx.xxx.xxx` (decimal)
IPv4 \| Subnet Mask	IPv4 subnet mask (decimal) Output example: `xxx.xxx.xxx.xxx` (decimal)
IPv4 \| Default Gateway	Port IPv4 default gateway Output example: `xxx.xxx.xxx.xxx` (decimal)
IPv6 \| Mode	Port IPv6 settings Enabled Disabled
IPv6 \| Link Local Address	Port IPv6 link local address Output example: `xxxx`:`xxxx`:`xxxx`:`xxxx`:`xxxx`:`xxxx`:`xxxx`:`xxxx` (hexadecimal) Output example: Auto Auto is displayed if the link local address is automatically set. Blank if "IPv6 \| Mode" is Disabled.
IPv6 \| Global Address	IPv6 global address of the port Output example: `xxxx`:`xxxx`:`xxxx`:`xxxx`:`xxxx`:`xxxx`:`xxxx`:`xxxx` (hexadecimal) Output example: Auto Auto is displayed if the global address is automatically set. Blank if "IPv6 \| Mode" is Disabled.
IPv6 \| Assigned Default Gateway	Port IPv6 assigned default gateway Output example: `xxxx`:`xxxx`:`xxxx`:`xxxx`:`xxxx`:`xxxx`:`xxxx`:`xxxx` (hexadecimal) Blank if "IPv6 \| Mode" is Disabled.
Channel Speed	Data transfer speed of the port (for example, 1G, 10G, Auto)
Security Switch	Port security switch settings On Off
TCP Port Number	The number of the port for using socket (1 to 65535)
Ethernet MTU Size (Byte) \| MTU	MTU settings 1500 4500 9000
Keep Alive Timer (sec.)	Keep alive timer value of iSCSI (30 to 64800) (sec)
Selective ACK	Selective ACK mode Enabled Disabled
Delayed ACK	Delayed ACK mode Enabled Disabled
Maximum Window Size (KB)	Window scale option settings 64KB 128KB 256KB 512KB 1024KB
iSNS Server \| Mode	iSNS mode settings On Off
iSNS Server \| IP Address	IP address of the iSNS server IPv4: `xxx.xxx.xxx.xxx` (decimal) IPv6: `xxxx`:`xxxx`:`xxxx`:`xxxx`:`xxxx`:`xxxx`:`xxxx`:`xxxx` (hexadecimal) Blank if "iSNS Server \| Mode" is Off.
iSNS Server \| TCP Port Number	Port number of TCP used for iSNS (1 to 65535). Blank if "iSNS Server \| Mode" is Off.
VLAN \| Tagging Mode	VLAN tagging mode set to the port On Off
VLAN \| ID	VLAN number set to the port (1 to 4094) Blank if "VLAN \| Tagging Mode" is set to Off.
Resource Group ID (Port)	Resource group ID of the port (0 to 1023 in decimal)
Resource Group Name(Port)	Resource group name of the port
iSCSI Name	iSCSI name of the port
CHAP User Name	Authenticated user name of the port
IPv6 \| Global Address 2	IPv6 global address 2 of the port Output example: `xxxx`:`xxxx`:`xxxx`:`xxxx`:`xxxx`:`xxxx`:`xxxx`:`xxxx` (hexadecimal) Output example: Auto Auto is displayed if the global address 2 is automatically set. Blank if "IPv6 \| Mode" is Disabled.
Virtual Port Mode	Virtual port mode of the port Enabled Disabled

IscsiTargetInfo.csv

This CSV file contains information about iSCSI target information set to the channel board port. A record is created for each iSCSI target.

Item	Content
Port	Port name
iSCSI Target Alias	iSCSI target alias
iSCSI Target ID	Number of the iSCSI target (00 to fe, hexadecimal)
iSCSI Target Name	Name of the iSCSI target
Host Mode	Host mode set to the iSCSI target (hexadecimal)
Host Mode Option	Host mode option set to the iSCSI target (decimal) Separated with a semicolon (;) if multiple host mode options are set.
Security Switch	Security switch status set to the iSCSI target port On Off
Authentication \| Method	Authentication method settings of the iSCSI target CHAP None Comply with Host Setting
Authentication \| Mutual CHAP	Mutual CHAP authentication function settings of the iSCSI target Enabled Disabled
Authentication \| User Name	User name set when iSCSI target was authenticated
Resource Group ID (iSCSI Target)	Resource group ID of the iSCSI target (0 to 1023)
Resource Group Name (iSCSI Target)	Resource group name of the iSCSI target

JnlInfo.csv

This CSV file contains information about Journals. A record is created for each journal.

JnlInfo.cvs file (Title: <<JNL Information>>)
Item	Content
JNL#	Journal number (in the hexadecimal format)
Current MPU	Number of MP unit currently controlling the journal
Setting MPU	Number of MP unit configured to control the journal

LdevCapaInfo.csv

This CSV file contains information about LDEV capacities. A record is created for each of the classifications shown in "Volume Kind".

Item	Content
Volume Kind	The following classifications are output: Internal OPEN Volumes External OPEN Volumes Total OPEN Volumes
Allocated LDEV Capacity (GB)	Allocated LDEV capacity
Unallocated LDEV Capacity (GB)	Unallocated LDEV capacity
Reserved Capacity (GB)	Reserved LDEV capacity
Total Volume Capacity (GB)	Total capacity of "Allocated LDEV Capacity", "Unallocated LDEV Capacity" and "Reserved Capacity"
Free Space (GB)	Free Space
Total Capacity (GB)	Total Capacity The sum of "Total Volume Capacity" and "Free Space"

LdevCountInfo.csv

This CSV file contains information about the number of logical devices (LDEVs). A record is created for each of the classifications shown in "Volume Kind".

Item	Content
Volume Kind	The following classifications are output: Internal Volumes External Volumes Total Volumes
Allocated OPEN LDEVs	Number of allocated open-system volumes (LDEVs)
Unallocated OPEN LDEVs	Number of unallocated open-system volumes (LDEVs)
Reserved OPEN LDEVs	Number of reserved open-system volumes (LDEVs)
V-VOL	Number of virtual volumes This item is output only when "Volume Kind" is Total Volumes. This item is blank when "Volume Kind" is Internal Volumes or External Volumes.
Total(All LDEVs)	Total number of LDEVs
ECC Groups	Total number of parity groups

LdevInfo.csv

This CSV file contains information about logical devices (LDEVs). A record is created for each LDEV.

For details about LDEVs, see the Provisioning Guide.

Item	Content
ECC Group	Number of parity group to which the LDEV belongs If the number starts with "E" (for example, E1-1), the parity group contains external volumes. If the number starts with "M" (for example, M1-1), the parity group contains FICON® DM volumes. If "LDEV Type" is Dynamic Provisioning, Thin Image, or ALU (Administrative Logical Unit), a hyphen (-) is output.
LDEV#	LDEV number
LDEV Name	LDEV name If the character string contains a comma, the comma is converted to a tab.
LDEV Emulation	LDEV emulation type
LDEV Type	LDEV type: Basic Dynamic Provisioning External Thin Image (Thin Image virtual volume ALU
LDEV Attribute	LDEV Attribute: CMDDEV (Command device) CMDDEV* (Remote command device) Journal (Journal volume) Pool (Pool volume) Reserve (Reserved volume) Quorum disk (Quorum Disk used with global-active device) TSE (Volume for Hitachi Compatible FlashCopy®) ALU SLU (Subsidiary Logical Unit) Deduplication system data volume Regular (Others)
Volume Size(Cyl)	LDEV capacity (in cylinders)
Volume Size(MB)	LDEV capacity (in MB)
Volume Size(Blocks)	LDEV capacity (in blocks)
CVS	Information about whether the LDEV is a custom-sized volume: On: The volume is a custom-sized volume. Off: "Off" is output for all other volumes.
Pool ID	Pool number The pool number is output in the following cases: "LDEV Type" is Dynamic Provisioning LDEV Attribute is Pool This item is blank for all other cases.
RAID Concatenation#0	Number of parity group to be concatenated to parity group (#0) identified by ECC Group This item is blank when the parity group is not concatenated to another parity group.
RAID Concatenation#1	Number of parity group to be concatenated to parity group (#1) identified by ECC Group This item is blank when the parity group is not concatenated to another parity group.
RAID Concatenation#2	Number of parity group to be concatenated to parity group (#2) identified by ECC Group This item is blank when the parity group is not concatenated to another parity group.
ORACLE CHECK SUM	Information about whether this LDEV is Oracle check sum target: For open-systems and multi-platform volumes: On Off For mainframe volumes, this item is blank.
Current MPU	Number of MP unit currently controlling the LDEV
Setting MPU	Number of MP unit configured to control LDEV
Allocated	Information about whether this LDEV is allocated to a host: For open-systems volumes, `Y` indicates that the volume is accessible to the host. For mainframe and multi-platform volumes, `Y` is output for all volumes except Reserved volumes. For open-systems volumes, `N` indicates that the volume is not accessible to the host. For mainframe and multi-platform volumes, `N` indicates that the volume is Reserved.
Pool Name	Name of the pool indicated by Pool ID If the character string contains a comma, the comma is converted to a tab.
CmdDevSecurity	Indicates whether Security is specified as the attribute for the command device: Enabled: Command device security is set. Disabled: Command device security is not set. Blank: "LDEV Attribute" is not CMDDEV.
CmdDevUserAuth	Indicates whether User Authentication is specified as the attribute for the command device: Enabled: User authentication is set. Disabled: User authentication is not set. Blank: "LDEV Attribute" is not CMDDEV.
CmdDevDevGrpDef	Indicates whether Device Group Definition is specified as the attribute for the command device: Enabled: Device group definition is set. Disabled: Device group definition is not set. Blank: "LDEV Attribute" is not CMDDEV.
Resource Group ID (LDEV)	LDEV resource group ID (decimal number)
Resource Group Name (LDEV)	LDEV resource group name
Encryption	Indicates whether the parity group identified by ECC Group is encrypted: For internal volumes: Enabled (encrypted) Disabled (not encrypted) For external volumes, this item is blank.
T10 PI	Indicates the T10 PI attribute set for the LDEV: Enabled Disabled Blank: The "LDEV Emulation" is not OPEN-V.

LdevStatus.csv

This CSV file contains information about the status of logical devices (LDEVs). A record is created for each LDEV.

Item	Content
VDEV#	Virtual device number in which the LDEV is defined
VDEV Status	VDEV status of "VDEV#" 1: Normal 0: Abnormal
HDEV#	LDEV number
HDEV Status	LDEV status 1: Normal 0: Abnormal
LDEV Emulation	LDEV emulation type
ECC Group	Number of the parity group where the LDEV belongs. If the number starts with "E" (for example, E1-1), the parity group contains external volumes. If the type of the LDEV is a Dynamic Provisioning or Thin Image virtual volume, a hyphen is output. Refer to "LdevInfo.csv" for information about the LDEV type.

LogPathStatus.csv

This CSV file contains information about mainframe logical paths.

LogPathStatus.csv file (Title: <<Main Frame Logical Path Status>>)
Item	Content
LPN#	Logical path number (in the hexadecimal format)
CHB Location	CHB name
Port	Port name
Link	Link address of the connected host (6-digit number in the hexadecimal format)
LGCL	Logical address of the connected host (number in the hexadecimal format)
LDKC#	Number of connected LDKC (in the hexadecimal format)
CU#	Number of connected CU (in the hexadecimal format)

LPartition.csv

This CSV file contains information about the cache logical partitioning function. A record is created for each cache partition for a managed resource.

For details about the cache logical partitioning function, see the Performance Guide.

Item	Content
CLPR#	CLPR ID (decimal number)
CLPR Name	Name of the CLPR
Cache Size(MB)	Cache size (in MB) allocated to this CLPR ID
Cache Residency Size(MB)	Cache Residency Manager cache size (in MB) allocated to this CLPR ID
ECC Group	Number of parity group allocated to this CLPR ID
LDEV#(V-VOL)	Number of LDEVs allocated to this CLPR ID The type of this LDEV is Dynamic Provisioning, Thin Image, or ALU. This item is blank when no LDEVs are assigned to the CLPR ID.

LunInfo.csv

This CSV file contains information about LU path definitions. A record is created for each set of LU path definitions that belongs to a host group. When only the port name (Port) is output, it indicates that no LU path is defined for the port (which is used only for a remote path or an external path). For more information about LU path definitions, see the Provisioning Guide.

Item	Description
Port	Port name
Host Group	Host group name If "Package Type" is iSCSI, the iSCSI target alias is output.
Host Mode	Host mode specified for this host group (hexadecimal)
Host Mode Option	Host mode option set for this host group (decimal) If more than one option is specified, the options are separated by semicolons (;). This item is blank when no host mode option has been specified.
LUN#	LUN number for this LU path definition (hexadecimal) This item is blank when no LU path is defined for the host group.
LDEV#	LDEV number for this LU path definition This item is blank when no LU path is defined for the host group.
Command Device	Information about whether the LDEV is a command device: On: Command Device On*: Remote Command Device Off: Others Blank: No LU path is defined for the host group.
Command Security	Information about whether the command device is secured: On Off Blank: No LU path is defined for the host group.
CVS	Information about whether the LDEV is a custom-sized volume: On: Customized volume Off: Other volumes Blank: No LU path is defined for the host group.
CHB Location	Name of the CHB on which this port is installed Output example: CHB-1D
Package Type	CHB type for CHB Location Output example for Fibre: 32FC4R (CHB) Output example for iSCSI: 10iSCSI2c (CHB)
Resource Group ID (Host Group)	Resource group ID of a host group (0 to 1,023, decimal)
Resource Group Name (Host Group)	Resource group name of a host group
T10 PI Mode	Indicates whether the T10 PI mode can be applied to the port for which the LU path is defined: Enabled Disabled Blank: "Package Type" does not support T10 PI mode.
T10 PI	Information about the T10 PI attribute which is set for the LDEV number of the LU path definition. Enabled Disabled Blank: The LDEV# is blank.
Asymmetric Access State	Asymmetric access status Indicates the asymmetric access status: Active/Optimized: Prioritized Active/Non-Optimized: Lower priority Blank: "Package Type" is iSCSI

LunPortInfo.csv

This CSV file contains information about LU path definition. A record is created for each port.

For details of LU path definition, see the Provisioning Guide.

Item	Content
Port	Port name
Security Switch	The setting status of the security switch: On Off
Port Address	Port address (2-digit hexadecimal number) 00 to ff This item is blank when "Package Type" is iSCSI.
Loop ID	Port address (0 - 125, decimal) This item is blank when "Package Type" is iSCSI.
Fabric	Setting status of the Fabric switch: On Off Blank: "Package Type" is iSCSI.
Connection	Fibre topology setting: Point to Point FC-AL Blank: "Package Type" is iSCSI.
Channel Speed	Channel speed of this port (for example, 4G, 10G, 32G)
WWN	WWN of this port (hexadecimal number) This item is blank when "Package Type" is iSCSI.
CHB Location	CHB on which the port is installed.
Package Type	CHB type for CHB Location Output example for Fibre: 32FC4R (CHB) Output example for iSCSI: 10iSCSI2c (CHB)
T10 PI Mode	Indicates whether the T10 PI mode can be applied to the port: Enabled Disabled Blank: "Package Type" does not support T10 PI mode.

MfDMInfo.csv

This CSV file contains information about migration volumes for mainframe. A record is created for each migration volume.

MfDMInfo.csv file (Title: <<M/F DM Information>>)
Item	Content
Migration Volume Group	Number of the migration volume The number starts with "M" (for example, M1-1)
Current MPU	Number of the MP unit that is controlling the migration volume
Setting MPU	Number f the MP unit specified to control the migration volume
Resource Group ID (ECC Group)	Resource group ID of migration volume (number in the decimal format)
Resource Group Name (ECC Group)	Resource group name of migration volume

MicroVersion.csv

This CSV file contains information about microcode versions.

MicroVersion.csv file (Title: <<Micro Version>>)
Item	Content
DKCMAIN	The version of the microcode for the RAID storage system (10 digits)
HTP	HTP microcode version (6 digits)
DKB	DKB microcode version (6 digits)
SVP	The version of the microcode installed on the service processor (8 digits)
CBA	CBA version (12 digits)
SSVP	SSVP microcode version (6 digits)
FCDG	FCDG microcode version (6 digits)
ROM BOOT	ROM BOOT microcode version (6 digits)
RAM BOOT	RAM BOOT microcode version (6 digits)
Config	Config microcode version (8 digits)
HDD	HDD microcode version (4 digits) HDD version in the format of "(HDD device type - code):(version)." If an HDD drive is not installed, only a colon (:) is displayed.
HDD (SVP)	HDD(SVP) microcode version (4 digits)
Expander	Expander microcode version (6 digits)
CFM	CFM microcode version (8 digits)
Printout Tool	Printout tool version
ISCF	ISCF version (8 digits)
GUM	GUM firmware version (8 digits)
FCBK	FCBK version (8 digits)
ISW	ISW firmware version (8 digits)
DKBN	DKBN version (6 digits)
NSW	NSW version (6 digits)
EDKBN	EDKBN version (6 digits)

MlcEnduranceInfo.csv

This CSV file contains information about endurance information of MLC. A record is created for each MLC endurance information.

If you change the SVP time 1 month or more, the history acquisition months will not be in order.

Item	Content
ECC Group	Number of parity groups of which this MLC (including FMD and FMD DC2 ) is a component. If it is a spare drive, Spare Drive is displayed. If it is a free drive, Free Drive is displayed.
CR#	C# and R# (2-digit hexadecimal numbers), which identify the PDEV Output in the format of "`XX`/`YY`" `XX`: C# `YY`: R#
Device Type-Code	Drive type code of this drive Output example: SLR5A-M800SS
Used Endurance Indicator (%)	The current used endurance of SSD life (0 to 100) The value of this indicator increases due to drive operation associated with internal processing of the storage system, and the host I/O. Even when no data is copied due to a drive failure, the value of this indicator increases because the spare drive also performs internal processing.
History1 (date)	Date on which the used endurance of SSD life was acquired (1 month ago) Output example: `yyyy`/`mm`/`dd`
History1 (%)	The used endurance of SSD life (0 to 100)(1 month ago)
History2 (date)	Date on which the used endurance of SSD life was acquired (2 months ago) Output example: `yyyy`/`mm`/`dd`
History2 (%)	The used endurance of SSD life (0 to 100) (2 months ago)
History3 (%) ... History 119 (%)	Life (0 to 100) (3 months ago ...119 months ago)
History120 (date)	Date on which the used endurance of SSD life was acquired (120 months ago) Output example: yyyy/mm/dd
History120 (%)	The used endurance of SSD life (0 to 100) (120 months ago)

ModePerLpr.csv

This CSV file contains information about system option modes. A record is created for each system option mode.

Item

Content

System Option Mode#

System option mode # (0 to 2047, decimal number)

LPR#0, LPR#1, …, LPR#31

System option mode for LPR#0 to LPR#31

If the system option mode is on:
On
If the system option mode is not on:
Blank

MpPathStatus.csv

This CSV file contains information about the status of logical paths. A record is created for each MP unit or CTL.

MpPathStatus.csv file (Title: <<MP Path Status>>)
Item	Content
MPU#/CTL#	MP unit number or CTL number (2-digit hexadecimal numbers): For MP unit number MPU#00 to MPU#0b For CTL number CTL#00 to CTL #0b
CMG#00-00 to CMG#00-0b CMG#01-00 to CMG#01-0b CMG#02-00 to CMG#02-0b CMG#03-00 to CMG#03-0b	Cache module path status for MP unit number in the format of “CMG#XX-YY”.¹ (CMG#XX-YY) XX: I path (00 to 03), YY: CMG# (00 to 0b)
MPU#00-00 to MPU#00-0b MPU#01-00 to MPU#01-0b MPU#02-00 to MPU#02-0b MPU#03-00 to MPU#03-0b	MP unit path status for MP unit number in the format of “MPU#XX-YY”.¹ MPU#XX-YY) XX: I path (00 to 03), YY: MPU# (00 to 0b )
CMG#00-00 to CMG#00-0b CMG#01-00 to CMG#01-0b CMG#02-00 to CMG#02-0b CMG#03-00 to CMG#03-0b	Cache module path status for CTL number in the format of “CMG#XX-YY”.¹ (CMG#XX-YY) XX: I path (00 to 03), YY: CMG# (00 to 0b): MSW number in one module (2-digit number in the hexadecimal format)
MPU#00-00 to MPU#00-0b MPU#01-00 to MPU#01-0b MPU#02-00 to MPU#02-0b MPU#03-00 to MPU#03-0b	MP unit path status for CTL number in the format of “MPU#XX-YY”.¹ (MPU#XX-YY) XX: I path (00 to 03), YY: MPU# (00 to 0b)
Notes: 1=Normal, 0=Abnormal

MpPcbStatus.csv

This CSV file contains information about the status of MP unit. A record is created for each MP unit.

MpPcbStatus.csv file (Title: <<MP PCB Status>>)
Item	Content
MPU ID	MP unit ID
Auto Assignment	Information about whether this MP unit is set to be automatically assigned to each resource or not Enabled Set to be automatically assigned Disabled Not set to be automatically assigned
PCB Status	MP unit status¹
MP#00, #01, #02..., #13	MP status on MP unit #0 to #13¹
Notes: 1=Normal, 0=Abnormal

PcbRevInfo.csv

This CSV file contains information about revisions of packages such as channel boards (CHBs) and others. A record is created for each package.

Item	Content
Cluster#	Cluster number 1 or 2
Location	Part name
FRU number	Product name of the package or some other name
PK Revision	Revision of the package
Factory	Factory manufacturing the package
Number	Serial number of the package
MAC Address	MAC address of the package

PdevCapaInfo.csv

This CSV file contains information about physical device (PDEV) capacities. A record is created for each of the classifications shown in "PDEV Kind".

Item	Content
PDEV Kind	The following four classifications are output: OPEN System (TB) Total Capacity (TB) Number of PDEVs
HDD Drive	HDD drive capacity (TB)
Spare Drive	Spare drive capacity (TB)
SSD Drive	SSD capacity (TB)
Free Drive	Free drive capacity (TB)

PdevInfo.csv

This CSV file contains information about physical devices (PDEVs). A record is created for each PDEV.

Item	Content
ECC Group	Number of parity group of which this PDEV is a component: Spare Drive: For spare drives Free Drive: For free drives
Emulation Type	Emulation type for the parity group indicated by "ECC Group" This item is blank when the ECC Group is Spare Drive.
CR#	C# and R# (2-digit hexadecimal numbers that identify the PDEV) Output in the format `XX`/`YY`, where: `XX`: C# `YY`: R#
PDEV Location	PDEV location name
Device Type	Drive type (for example, SAS, SSD)
RPM	Revolutions per minute This item is blank when the drive type is SSD. For VSP E990, Interface is output.
Device Type-Code	Device type code of this drive (for example, DKR5D-J600SS)
Device Size	Drive size (inches) (for example, 2.5, 3.5) This item is blank when the drive type is FMD.
Device Capacity	Drive capacity (GB or TB)
Drive Version	Drive firmware version
DKB1	Name of the DKB1 controlling the PDEV
DKB2	Name of the DKB2 controlling the PDEV
DKB3	(VSP E990) Name of the DKB3 controlling the PDEV
DKB4	(VSP E990) Name of the DKB4 controlling the PDEV
Serial Number #	Serial number of this drive
RAID Level	RAID level of the parity group indicated by "ECC Group" This item is blank when the "ECC Group" is Spare Drive or Free Drive
RAID Concatenation #0	Number of parity group to be concatenated to parity group (#0) identified by "ECC Group" This item is blank when the parity group is not concatenated to another parity group or is Spare Drive.
RAID Concatenation #1	Number of parity group to be concatenated to parity group (#1) identified by "ECC Group" This item is blank when the parity group is not concatenated to another parity group or is Spare Drive.
RAID Concatenation #2	Number of parity group to be concatenated to parity group (#2) identified by "ECC Group" This item is blank when the parity group is not concatenated to another parity group or is Spare Drive.
Resource Group ID (ECC Group)	Resource group ID of parity group (decimal number)
Resource Group Name (ECC Group)	Resource group name of parity group
Encryption	Encryption status of the parity group to which the PDEV belongs: Enabled: Encryption is enabled. Disabled: Encryption is disabled.
Accelerated Compression	Accelerated compression setting: Enabled: Accelerated compression is enabled. Disabled: Accelerated compression is disabled. This item is blank when the parity group with PDEV does not support accelerated compression, or when the ECC Group is Spare Drive.
Automatically manage compressed space of FMD parity group	Indicates whether to manage the compressed area of the FMD parity group automatically. Enabled: The area is managed automatically. Disabled: The area is not managed automatically This item is blank when the parity group to which the PDEV belongs does not support accelerated compression.

PdevStatus.csv

This CSV file contains information about the status of physical devices (PDEVs). A record is created for each PDEV.

Item	Content
CR#	C# and R# (2-digit hexadecimal numbers), which identify the PDEV Output in the format `XX`/`YY`, where: `XX`: C# `YY`: R#
Pdev Status	PDEV status¹
Port0 Status	Status of Port 0 on this PDEV¹
Port1 Status	Status of Port 1 on this PDEV¹
Pdev Location	Location name of this PDEV
Notes: 1=Normal, 0=Abnormal

PhyPathStatus.csv

This CSV file contains information about mainframe physical paths.

PhyPathStatus.csv file (Title: <<Main Frame Physical Path Status>>)
Item	Content
Module#	Module number
CHB Location	CHB name
Port	Port name
Link(Self)	DKC port address (6-digit number in the hexadecimal format)
Link(Dest)	Link address of the adjacent node (6-digit number in the hexadecimal format)
Status	Information about whether the adjacent node is enabled: VALID (CUR) INVALID
Type/Model	Type of the adjacent node (6-digit number in the hexadecimal format) and model name of the adjacent node (3-digit number in the hexadecimal format)
SeqNumber	Serial product number of the adjacent node (14-digit number in the hexadecimal format)
Tag	Tag information of the adjacent node (4-digit number in the hexadecimal format)
WWN(N_Port_Name)	N_Port_Name of the adjacent node (16-digit number in the hexadecimal format)
WWN(Node_Name)	Node_Name of the adjacent node (16-digit number in the hexadecimal format)
Speed	Data transfer speed: 2 Gbps 4 Gbps 8 Gbps

PkInfo.csv

This CSV file contains information about channel boards (CHBs). A record is created for each CHB.

PkInfo.csv file (Title: <<PK>>)
Item	Content
CHB Location	CHB name
DKC Emulation	DKC emulation type
Port#	Number of the port installed on the CHB (2-digit number in the hexadecimal format)
Port	Name of port installed on the CHB
Package Type	CHB type CHB for CHB location: Fibre: 4HF32R (Fibre) iSCI: 2HS10S (iSCI) FICON: 4Mx16 (Mfibre)
SFP Kind	SFP (Small Form factor Pluggable) kind: Short Wave Long Wave
SFP Status	SFP status: Normal Failed Not Fix
Port Type	Port type Output example: Bidirectional Target HTP FNP
Fabric	One of the Fibre topology settings indicating the setting status of the Fabric switch (output only for an open system CHB that is Fibre or FCoE): On Off
Connection	One of the Fibre topology settings (output only for an open system CHB that is Fibre or FCoE) Point to Point FC-AL
Port Address	Port address (2-digit number in the hexadecimal format) Output only for an open system CHB that is Fibre or FCoE
Resource Group ID (Port)	Resource group ID of port (number in the decimal format)
Resource Group Name (Port)	Resource group name of port
Port Internal WWN	WWN of the port (output only for an open system CHB that is Fibre or FCoE)
T10 PI Mode	Indicates whether the T10 PI mode can be applied to the port. Enabled Disabled
SFP Data Transfer Rate	Maximum SFP data transfer rate that is supported by installed packages: 8G 10G 16G 32G

PpInfo.csv

This CSV file contains information about the software. A record is created for each software product.

For details about the license key, see Managing license keys.

Item	Content
Program Product Name	Software name
Install	Information about whether the installed license key is enabled: Enabled: Installed and the software can be used. Disabled: Installed but the software cannot be used.
Key Type	Installed license key type: Permanent Temporary Emergency Term Not Installed: No license key is installed.
Permitted Volumes(TB)	Permitted volume capacity for this software (in TB). (The used volume capacity is not output.) If no upper limit value is set for the capacity, "Unlimited" is output. This item is blank in either of the following cases: A new license key whose "Key Type" is Temporary or Emergency has been installed. No license key has been installed.
Expiration Date	Expiration date of the software The format is `mm`/`dd`/`yyyy` (month/day/year). This item is blank in either of the following cases: The effective term of the license key is unlimited. No license key has been installed.
Status	License key status of the software: Installed Not Enough License Grace Period Expired Not Installed Installed (Disabled)

SMfundat.csv

This CSV file contains information about SM functions. A record is created for each of the classifications shown in "SM Install Function".

Item

Content

SM Install function

The following classifications are output for VSP F350, VSP F370, VSP G350, VSP G370:

Base
Extension 1
Extension 2

The following classifications are output for VSP E990, VSP F700, VSP F900, VSP G700, VSP G900:

Base
Extension1
Extension2
Extension3

Availability

Information about whether the function of "SM Install function" is enabled

Enabled
Disabled

SsdDriveInfo.csv

This CSV file contains information about SSDs. A record is created for each drive.

Item	Content
ECC Group	Number of the parity group to which this SSD belongs Spare Drive: The SSD is a spare drive. Free Drive: The SSD is a free drive.
CR#	C# and R# (2-digit hexadecimal numbers that identify the PDEV) Output in the format `XX`/`YY`, where: `XX`: C# `YY`: R#
PDEV Location	Drive type code of the PDEV location name for this drive
Device Type-Code	Drive type code Output example: SLR5A-M800SS
Device Capacity	Drive capacity in GB or TB
SSD Device Type	SSD drive type (for example, SSD(RI), MLC, FMD)
Used Endurance Indicator (%)	Used endurance of SSD life (0 to 100)
Used Endurance Indicator Threshold (%)	Drive life threshold (0 to 100)
Used Endurance Indicator Warning SIM (%)	Warning SIM threshold (0 to 100)
FMD Battery Life Indicator Warning SIM (%)	Threshold of battery life warning SIM (0 to 100) This item is blank if the SSD is other than FMD. For VSP E990, no information is output.
FMD Battery Life Indicator (%)	Used battery life (0 to 100) This item is blank if the SSD is other than FMD. For VSP E990, no information is output.

SsidInfo.csv

This CSV file contains information about SSIDs. A record is created for each SSID.

Item	Content
DEV# Start	First LDEV number for the SSID
DEV# End	Last LDEV number for the SSID
SSID	Subsystem ID (hexadecimal)

SysoptInfo.csv

This CSV file contains information about system options.

Item	Content
Spare Disk Recover	Speed of copying data to the spare drive. Interleave mode Full Speed mode
Dynamic Sparing	Information about whether to perform automatic copy to a spare drive if the occurrences of drive failures exceed the threshold. On Off
Correction Copy	Information about whether to perform correction copy to a spare drive if a drive is blocked. On Off
Disk Copy pace	Speed of copying the spare drive in the Interleave mode. Faster Medium Slower
System Option On	System options that are set to ON. Output example: mode`XXXX` (0 to 2047, decimal number)
Link Failure Threshold	Threshold to notify the link failure (0 to 255, decimal)

WwnInfo.csv

This CSV file contains information about hosts. A record is created for each host.

For details about the host setting, see the Provisioning Guide for Open Systems. For information about iSCSI hosts, see IscsiHostInfo.csv. For information about iSCSI targets, see IscsiTargetInfo.csv.

Item	Content
Port	Port name
Host Group	Host group name If "Package Type" is iSCSI, the iSCSI target alias is output.
Host Mode	Host mode that is set for the host group (number in hexadecimal format)
Host Mode Option	Host mode option that is set for the host group (hexadecimal number) Multiple options are separated by semicolons (;). This item is blank when no host mode option is specified.
WWN	World Wide Name of the host bus adapter registered to the host group (hexadecimal number) This item is blank when no valid WWN is specified or when Package Type is iSCSI.
Nickname	Nickname of the host This item is blank when no nickname is specified or when Package Type is iSCSI.
Host Group#	Host group number (hexadecimal) If "Package Type" is iSCSI, the iSCSI target alias is output.
CHB Location	CHB on which the port is installed
Package Type	CHB type for CHB Location Output example for Fibre: 4HF32R (Fibre) Output example for iSCSI: 2HS10S (iSCSI) Output example for FICON®: 4Mx16 (Mfibre)
T10 PI Mode	Indicates whether the T10 PI mode can be applied to the port: Enabled Disabled

Quick Links

Creating configuration reports

Downloading and viewing the HDvM - SN configuration reports

Viewing configuration reports in the Reports window

Deleting configuration reports

Examples of Device Manager - Storage Navigator storage configuration reports

Report examples: table view

CHAP Users report

Disk Boards report

Host Groups / iSCSI Targets report

Hosts report

Logical Devices report

LUNs report

MP Unit report

MP unit details report

Parity Groups report

PDEVs report

Ports report

Power Consumption report

Spare Drives report

SSD Endurance report

Storage System Summary report

Report examples: graphical view

Cache Memories report

Channel Adapters report

Physical View report

Report examples: CSV files

AllConf.csv

CacheInfo.csv

ChapUserInfo.csv

ChaStatus.csv

DcrInfo.csv

DeviceEquipInfo.csv

DkaInfo.csv

DkaStatus.csv

DkcInfo.csv

DkuTempInfo.csv

DkuTempAveInfo.csv

DkuTempMaxInfo.csv

DkuTempMinInfo.csv

ELunInfo.csv

EnvMonInfo.csv

HSNBXTempInfo.csv

FcSpNameInfo.csv

FcSpPortInfo.csv

HduInfo.csv

IscsiHostInfo.csv

IscsiPortInfo.csv

IscsiTargetInfo.csv

JnlInfo.csv

LdevCapaInfo.csv

LdevCountInfo.csv

LdevInfo.csv

LdevStatus.csv

LogPathStatus.csv

LPartition.csv

LunInfo.csv

LunPortInfo.csv

MfDMInfo.csv

MicroVersion.csv

MlcEnduranceInfo.csv

ModePerLpr.csv

MpPathStatus.csv

MpPcbStatus.csv

PcbRevInfo.csv

PdevCapaInfo.csv

PdevInfo.csv

PdevStatus.csv

PhyPathStatus.csv

PkInfo.csv

PpInfo.csv

SMfundat.csv

SsdDriveInfo.csv

SsidInfo.csv

SysoptInfo.csv

WwnInfo.csv