Installation

Installation of VSP G130, VSP G/F350, and G/F370 involves setting up the storage hardware, registering the product, setting up the remote monitoring system, and notifying Hitachi Vantara that your system is installed with Hi-Track Remote Monitoring enabled.

Step 1: Verify the system configuration

The installation procedure depends on your system configuration. Refer to the packing list and identify whether your system includes a service processor (SVP), listed as the "1U management server".

Step 2: Install your VSP G/F system

• VSP G/F350 and G/F370

  If your system includes an SVP, see Installing your storage system that includes an SVP.

  If your system does not include an SVP, see Installing your storage system.

• VSP G130 (available in select markets in APAC)

  If your system includes an SVP, see Installing your storage system that includes an SVP  or 安装带有 SVP 的 VSP G130 存储系统.

  If your system does not include an SVP, see Installing your storage system  or 安装 VSP G130 存储系统.

Register your storage system with the Support Website

Log in to the Support Website here. If you do not already have an account, you will need to register. When registering, you will be asked for information about the product you own. For Product Name, enter VSP G130 G/F350 G/F370 G/F700 G/F900 and your product serial number, which is labeled MFG. NO. on the rear of the controller.

Set up the Hitachi Remote Ops Monitoring system

Download the Hitachi Remote Ops monitoring system software and Installation Guide here. You'll need your site ID when configuring the Hitachi Remote Ops monitoring system. To locate the Site ID, view My Sites/Products on the Support Website. If you do not see your site listed, you will first need to add the site.

Notify Hitachi Vantara

After you have configured the Hitachi Remote Ops monitoring system with the correct Site ID open a Case on the Support Website to let us know the system is installed and Hitachi Remote Ops monitoring system is enabled.