Audit logs quick reference
The event names and operation names output to audit log files by the operations of the management client or Maintenance PC are described.
Audit Log functions
The following table lists the functions used in audit logging and provides their meanings.
Function name |
Description |
ACM |
Audit log functions used for account management |
AuditLog |
Audit log functions used during audit logging |
BASE |
Audit log functions used during initial setup |
Information |
Audit log functions used during log related operations on Maintenance PC |
Install |
Audit log functions used during software or firmware installation |
Local Replications |
Audit Log functions used during local replication operations |
Maintenance |
Audit log functions used during general maintenance |
Monitor |
Audit log functions used to monitor process |
PFM |
Audit log functions used to monitor performance |
PROV |
Audit log functions used to provision the system |
Remote Maintenance |
Audit log functions used for Remote Maintenance application |
Remote Replications |
Audit log functions used during remote replication operations |
SPM |
Audit log functions used during Server Priority Manager operations |
UVM |
Audit log functions used during Universal Volume Manager operations |
VM |
Audit log functions used during Volume Migration operations |
VPM |
Audit log functions used during Virtual Partition Manager operations |
VS |
Audit log functions used during volume shredding operations |
Device Manager - Storage Navigator and Maintenance PC operation
The storage system logs operations performed from management client or Maintenance PC. The following table lists the function/operation names as well as GUI operations that trigger logging. Functions are listed in alphabetical order.
Function Name |
Operation Name |
Corresponding GUI Operation |
AuditLog |
Send Test Message |
Sending a test log to a Syslog server on the Audit Log Settings window |
AuditLog |
Set Up Syslog Serv |
Configuring syslog servers in the Set Up Syslog Server for Audit Logs window |
ACM |
AddUsersToUserGroup |
Adding users to a user group |
ACM |
CreateUser |
Creating a new user account |
ACM |
CreateUserGroup |
Creating a new user group |
ACM |
DeleteUsers |
Deleting user accounts |
ACM |
DeleteUserGroups |
Deleting user groups |
ACM |
DisableUsers |
Disabling users |
ACM |
EnableUsers |
Enabling users |
ACM |
RemoveUsersFromUserGroup |
Removing users from a user group |
ACM |
Set Login Message |
Setting login message |
ACM |
UpdatePassword |
Changing a password |
ACM |
UpdateUserAuthentication |
Changing a user authentication mode |
ACM |
UpdateUserGroupAllResourceGrp |
Changing assignment of all resource groups of a user group |
ACM |
UpdateUserGroupName |
Changing a user group name |
ACM |
UpdateUserGroupResourceGrpBmp |
Changing assignment of resource groups of a user group |
ACM |
UpdateUserGroupRole |
Assigning roles to a user group or releasing assignment of roles |
BASE |
Advanced Settings |
Editing advanced system settings |
BASE |
Automatic LDAP Password change |
Changing, through the REST API, the user ID and password that are used for search or the password only |
BASE |
Create Conf Report |
Creating configuration reports |
BASE |
Delete CVAE Info |
Changing information from Hitachi Command Suite |
BASE |
Delete Reports |
Deleting configuration reports |
BASE |
Delete Tasks |
Deleting tasks |
BASE |
Disable Auto Delete |
Disabling Task Auto Delete |
BASE |
Edit Storage System |
Editing storage system information |
BASE |
Enable Auto Delete |
Enabling Task Auto Delete |
BASE |
Entry Tasks |
Registering tasks to the storage system |
BASE |
HCSSO Authentication |
Launching Device Manager - Storage Navigator from Hitachi Command Suite |
BASE |
HCSSO SetOneTimeKey |
Issuing OneTimeKey from Hitachi Command Suite |
BASE |
Login |
Logging in to or out from Device Manager - Storage Navigator or Maintenance PC. These audit logs are also recorded when the SVP periodically communicates with GUM and collects storage system information. In this case, the IP address of the SVP is recorded as the communication source. |
BASE |
Logout | |
BASE |
Resume Tasks |
Resuming tasks |
BASE |
Set CVAE Info |
Changing information from Hitachi Command Suite |
BASE |
Start Maintenance |
Logging in to Maintenance PC |
BASE |
Suspend Tasks |
Suspending tasks |
BASE |
Unlock Forcibly |
Forcible unlocking |
Information |
Delete Log |
Log-related operations on Maintenance PC |
Information |
ORM Value |
Log-related operations on Maintenance PC |
Information |
Threshold Value |
Log-related operations on Maintenance PC |
Install |
All Config |
Maintenance on Maintenance PC |
Install |
Backup Config |
Maintenance on Maintenance PC |
Install |
FlashDrive ORM Value |
Maintenance on Maintenance PC |
Install |
Initialize ORM Value |
Maintenance on Maintenance PC |
Install |
Machine Install Date |
Maintenance on Maintenance PC |
Install |
NEW Installation |
Maintenance on Maintenance PC |
Install |
System Option |
Maintenance on Maintenance PC |
Install |
System Tuning |
Maintenance on Maintenance PC |
Local Replication |
Assign S-VOLs |
Assigning secondary volumes of Thin Image pairs |
Local Replication |
Create Pairs |
Creating pairs of ShadowImage or Thin Image |
Local Replication |
Delete Pairs |
Deleting pairs of ShadowImage or Thin Image |
Local Replication |
Edit Options |
Setting options for ShadowImage |
Local Replication |
Initialize |
Initializing pairs of ShadowImage or Thin Image |
Local Replication |
Remove S-VOLs |
Removing secondary volumes of Thin Image pairs |
Local Replication |
Resync Pairs |
Resynchronizing pairs of ShadowImage or Thin Image |
Local Replication |
Split Pairs |
Splitting pairs of ShadowImage or Thin Image |
Local Replication |
Suspend Pairs |
Suspending ShadowImage pairs |
Maintenance |
Block |
Maintenance from the Maintenance Utility menu |
Maintenance |
Block(Remove) |
Maintenance from the Maintenance Utility menu |
Maintenance |
Block(Type Change) |
Maintenance from the Maintenance Utility menu |
Maintenance |
Blockade |
Maintenance on Maintenance PC |
Maintenance |
Boot System SafeMode |
Maintenance from the Maintenance Utility menu |
Maintenance |
Change SFP Type |
Maintenance from the Maintenance Utility menu |
Maintenance |
Check Remove |
Maintenance from the Maintenance Utility menu |
Maintenance |
Correction Copy |
Maintenance on Maintenance PC |
Maintenance |
Create User |
Maintenance from the Maintenance Utility menu |
Maintenance |
Create User Group |
Maintenance using the Maintenance Utility applications (GUM AP) such as NAS Manager |
Maintenance |
Delete Users |
Maintenance from the Maintenance Utility menu |
Maintenance |
Delete User Group |
Maintenance using the Maintenance Utility applications (GUM AP) such as NAS Manager |
Maintenance |
Disable Licenses |
Maintenance from the Maintenance Utility menu |
Maintenance |
Edit Hypervisor Mode |
Maintenance from the Maintenance Utility menu |
Maintenance |
Edit Login Message |
Maintenance from the Maintenance Utility menu |
Maintenance |
Edit ReplacingNotice |
Maintenance from the Maintenance Utility menu |
Maintenance |
Edit System Param |
Maintenance from the Maintenance Utility menu |
Maintenance |
Edit UPS Mode |
Maintenance from the Maintenance Utility menu |
Maintenance |
Edit User |
Maintenance from the Maintenance Utility menu |
Maintenance |
Edit User Group |
Maintenance using the Maintenance Utility applications (GUM AP) such as NAS Manager |
Maintenance |
Enable Licenses |
Maintenance from the Maintenance Utility menu |
Maintenance |
Force Rls SysLock |
Maintenance from the Maintenance Utility menu |
Maintenance |
Install |
Maintenance from the Maintenance Utility menu |
Maintenance |
Install NAS Firm |
Maintenance from the Maintenance Utility menu |
Maintenance |
License Key Install |
Maintenance from the Maintenance Utility menu |
Maintenance |
License Key Remove |
Maintenance from the Maintenance Utility menu |
Maintenance |
MP Restore |
Maintenance on Maintenance PC |
Maintenance |
Power Off Storage |
Maintenance from the Maintenance Utility menu |
Maintenance |
Power On Storage |
Maintenance from the Maintenance Utility menu |
Maintenance |
Reboot GUM |
Maintenance from the Maintenance Utility menu |
Maintenance |
Remove |
Maintenance from the Maintenance Utility menu |
Maintenance |
Remove NAS Firm |
Maintenance from the Maintenance Utility menu |
Maintenance |
Reset DurationOfUse |
Maintenance from the Maintenance Utility menu |
Maintenance |
Reset HUB |
Maintenance from the Maintenance Utility menu |
Maintenance |
Reset Hypervisor |
Maintenance from the Maintenance Utility menu |
Maintenance |
Reset Hypervisor NW |
Maintenance from the Maintenance Utility menu |
Maintenance |
Reset NASFW |
Maintenance from the Maintenance Utility menu |
Maintenance |
Restore |
Maintenance from the Maintenance Utility menu or maintenance on Maintenance PC |
Maintenance |
Restore(Remoeve) |
Maintenance from the Maintenance Utility menu or maintenance on Maintenance PC |
Maintenance |
Restore(Type Change) |
Maintenance from the Maintenance Utility menu |
Maintenance |
Restore Data |
Maintenance on Maintenance PC |
Maintenance |
Select Cipher Suite |
Maintenance from the Maintenance Utility menu |
Maintenance |
Select Login Window |
Maintenance from the Maintenance Utility menu |
Maintenance |
Set Up Alert |
Maintenance from the Maintenance Utility menu |
Maintenance |
Set Up Cloud Connector |
|
Maintenance |
Set Up Date & Time |
Maintenance from the Maintenance Utility menu |
Maintenance |
Set Up Email |
Maintenance using the Maintenance Utility applications (GUM AP) such as NAS Manager |
Maintenance |
Set Up Network Perm |
Maintenance from the Maintenance Utility menu |
Maintenance |
Set Up Network Set |
Maintenance from the Maintenance Utility menu |
Maintenance |
Set Up SNMP |
Maintenance using the Maintenance Utility applications (GUM AP) such as NAS Manager |
Maintenance |
Set Up Syslog |
Maintenance using the Maintenance Utility applications (GUM AP) such as NAS Manager |
Maintenance |
Set Up System Info |
Maintenance from the Maintenance Utility menu |
Maintenance |
Stop Copy |
Maintenance from the Maintenance Utility menu |
Maintenance |
Turn Off Locate LEDs |
Maintenance from the Maintenance Utility menu |
Maintenance |
Turn On Locate LEDs |
Maintenance from the Maintenance Utility menu |
Maintenance |
Update Cert Files |
Maintenance from the Maintenance Utility menu |
Maintenance |
Update Firmware |
Maintenance from the Maintenance Utility menu |
Maintenance |
UserAccount Backup |
Maintenance from the Maintenance Utility menu |
Maintenance |
UserAccount Restore |
Maintenance from the Maintenance Utility menu |
PFM |
Delete Unused WWNs |
Performance Monitor |
PFM |
Edit CU Monitor Mode |
Performance Monitor |
PFM |
Edit Monitoring SW |
Performance Monitor |
PFM |
Edit WWN |
Performance Monitor |
PFM |
Edit WWN MonitorMode |
Performance Monitor |
PROV |
Add Hosts |
|
PROV |
Add LUN Paths |
|
PROV |
Assign MP Unit |
Assigning MP units |
PROV |
Block LDEVs |
Blocking LDEVs |
PROV |
CalculateTieringMonitorData |
Recalculating tier monitoring data from Hitachi Command Suite |
PROV |
Create Host Groups |
Creating host groups |
PROV |
Create LDEVs |
Creating new LDEVs |
PROV |
Create Resource Grps |
Creating resource groups |
PROV |
Create VDKC-Box |
Creating a VDKC-Box from Hitachi Command Suite |
PROV |
Create/Expand Pools |
|
PROV |
CreateAlus |
Creating an LDEV with the ALU attribute |
PROV |
CreateiScsiName |
Adding hosts to selected iSCSI targets |
PROV |
CreateiScsiPath |
|
PROV |
CreateiScsiTarget |
Creating iSCSI targets |
PROV |
CreateLdev |
Creating new internal or external volumes |
PROV |
CreateParityGroups |
Creating parity groups |
PROV |
CreateRemoteChapUser |
Adding CHAP users to selected iSCSI targets |
PROV |
CreateSlus |
Creating an LDEV with the SLU attribute from Hitachi Command Suite |
PROV |
CreateThinProvisioningVolumes |
Creating a Dynamic Provisioning virtual volume from Hitachi Command Suite |
PROV |
CreateTiPairsWithSlu |
Creating Thin Image pairs using LDEVs with the SLU attribute from Hitachi Command Suite |
PROV |
CreateTiVolumes |
Creating a secondary volume for Thin Image from Hitachi Command Suite |
PROV |
Delete Host Groups |
Deleting host groups |
PROV |
Delete LDEVs |
Deleting LDEVs |
PROV |
Delete Login WWNs |
Deleting unnecessary WWNs |
PROV |
Delete LUN Paths |
Removing LUN paths from LDEVs |
PROV |
Delete Resource Grps |
Deleting resource groups |
PROV |
Delete VDKC-Box |
Deleting a VDKC-Box from Hitachi Command Suite |
PROV |
DeleteAlus |
Deleting an LDEV with the ALU attribute |
PROV |
DeleteiScsiInitiatorUser |
Deleting the setting information of users with CHAP authentication on ports |
PROV |
DeleteiScsiName |
Removing hosts from selected iSCSI targets |
PROV |
DeleteiScsiPath |
|
PROV |
DeleteiScsiTarget |
Deleting iSCSI targets |
PROV |
DeleteLdev |
Deleting internal or external volumes |
PROV |
DeleteLoginiScsiName |
Deleting unnecessary iSCSI names |
PROV |
DeleteParityGroups |
Deleting parity groups |
PROV |
DeleteRemoteChapUser |
Removing CHAP users from selected iSCSI targets |
PROV |
DeleteSlus |
Deleting an LDEV with the SLU attribute from Hitachi Command Suite |
PROV |
DeleteTargetChapUser |
Removing CHAP users assigned to iSCSI targets |
PROV |
DeleteTiVolumes |
Deleting a secondary volume for Thin Image from Hitachi Command Suite |
PROV |
DRU Expiration Lock |
Data Retention Utility |
PROV |
Edit Cmd Dev(Auth) |
Editing command device settings |
PROV |
Edit Cmd Dev(DevGrp) |
Editing command device settings |
PROV |
Edit Cmd Dev(Sec) |
Editing command device settings |
PROV |
Edit Command Devices |
Editing command device settings |
PROV |
Edit DRU Attribute |
Data Retention Utility |
PROV |
Edit Full Allocation |
Enabling or disabling the Full Allocation setting |
PROV |
Edit Host |
Editing host settings |
PROV |
Edit Host Grps(Mode) |
Editing host group settings |
PROV |
Edit Host Grps(Name) |
Editing host group settings |
PROV |
Edit LDEVs(tier) |
Editing LDEV settings |
PROV |
Edit External LDEV Tier Rank |
Editing the external LDEV tier ranks of pool volumes assigned to a pool |
PROV |
Edit MP Units |
Editing MP unit settings |
PROV |
Edit Ports(Address) |
Editing port settings |
PROV |
Edit Ports(Security) |
Editing port settings |
PROV |
Edit Ports(Speed) |
Editing port settings |
PROV |
Edit Ports(Topology) |
Editing port settings |
PROV |
Edit Resource Grp |
Editing resource groups |
PROV |
Edit Tiering Policy |
Editing the tiering policy |
PROV |
Edit V-VOL Option |
|
PROV |
Edit/Delete Pools |
|
PROV |
Edit/Delete UUIDs |
|
PROV |
EditiScsiInitiatorUser |
Editing the setting information of users with CHAP authentication on ports |
PROV |
EditiScsiName |
Editing host settings |
PROV |
EditiScsiNickName |
Editing host settings |
PROV |
EditiScsiTarget |
Editing iSCSI target settings |
PROV |
EditiSNS |
Editing port settings |
PROV |
EditPortInfo |
Editing port settings |
PROV |
EditRemoteChapUser |
Editing CHAP user settings |
PROV |
EditRemoteTargetUser |
Editing iSCSI targets |
PROV |
EditT10piMode |
Editing T10 PI mode settings on ports |
PROV |
EditTargetChapUser |
Editing settings of CHAP users assigned to iSCSI targets |
PROV |
ExecBindingOperation |
Binding or unbinding an LDEV with the SLU attribute to or from the LDEV with the ALU attribute |
PROV |
Expand V-VOLs |
Increasing virtual volume capacity |
PROV |
ExpandSlus |
Increasing capacity of an LDEV with the SLU attribute from Hitachi Command Suite |
PROV |
Format LDEVs |
|
PROV |
Format LDEVs(Q) |
|
PROV |
Initialize Pools |
Initializing pools |
PROV |
LDEV Name |
|
PROV |
LdevForceRestore |
Forcible restoration of LDEVs |
PROV |
MapSecondaryVolumeWithSlu |
Mapping LDEVs with the SLU attribute to the secondary volumes of Thin Image pairs from Hitachi Command Suite |
PROV |
Monitor Pools |
Starting the performance monitoring of a pool |
PROV |
Move Resources |
|
PROV |
OperateSiPairsWithSlu |
Operating ShadowImage pairs using LDEVs with the SLU attribute from Hitachi Command Suite |
PROV |
OperateTiPairsWithSlu |
Operating Thin Image pairs using LDEVs with the SLU attribute from Hitachi Command Suite |
PROV |
Pool Name |
|
PROV |
Reclaim Zero Pages |
Releasing pages in virtual volumes |
PROV |
Release HostReserved |
Releasing Host-Reserved LUNs |
PROV |
Relocate Pool |
Starting the tier relocation of a pool |
PROV |
Remove Hosts |
Removing hosts from host groups |
PROV |
Restore LDEVs |
Restoring LDEVs |
PROV |
Restore Pools |
Restoring pools |
PROV |
RevertTiPairsWithSlu |
Reverting Thin Image pairs using LDEVs with the SLU attribute from Hitachi Command Suite |
PROV |
Set PageTieringLevel |
Setting the tiering policy per page |
PROV |
Set Virtual LDEV |
|
PROV |
Shrink Pool |
Decreasing pool capacity |
PROV |
StartParityGroupsFormat |
Formatting parity groups |
PROV |
StartVerify |
Verifying LDEVs |
PROV |
Stop Monitoring |
Stopping the performance monitoring of a pool |
PROV |
Stop Reclm ZeroPages |
Stopping releasing pages in virtual volumes |
PROV |
Stop Relocating |
Stopping the tier relocation of a pool |
PROV |
Stop Shrinking Pool |
Stopping decreasing pool capacity |
PROV |
StopFormat |
Stopping formatting parity groups |
PROV |
StopVerify |
Stopping verifying LDEVs |
PROV |
UnmapSecondaryVolumeWithSlu |
Unmapping the secondary volumes of Thin Image pairs using LDEVs with the SLU attribute from Hitachi Command Suite |
PROV |
UpdateAluaMode |
|
PROV |
UpdateAsymmetricAccessStatePerHG |
Editing Asymmetric Access States settings |
PROV |
UpdateCopybackMode |
Enabling or disabling copy-back mode |
PROV |
UpdateParityGroupSettings |
Enabling or disabling accelerated compression |
PROV |
UpdateSpareDrives |
Assigning as a spare drive or releasing a spare drive setting |
Remote Replication |
Add Path |
Adding paths to remote storage systems |
Remote Replication |
Add Quorum Disk ID |
Adding quorum disk IDs used by global-active device |
Remote Replication |
Add RCU |
Adding connections to remote storage systems |
Remote Replication |
Change JNL Option |
Changing the journal option for Universal Replicator |
Remote Replication |
Change Mirror Option |
Changing the mirror option for Universal Replicator |
Remote Replication |
Change RCU Option |
Changing the remote storage system options |
Remote Replication |
Create Pairs |
Creating pairs of TrueCopy, Universal Replicator, and global-active device |
Remote Replication |
Delete Pairs |
Deleting pairs of TrueCopy, Universal Replicator, and global-active device |
Remote Replication |
Delete Path |
Removing paths from remote storage systems |
Remote Replication |
Del Quorum Disk ID |
Deleting quorum disk IDs used by global-active device |
Remote Replication |
Delete RCU |
Removing connections to remote storage systems |
Remote Replication |
Edit Options |
Setting the remote replica options |
Remote Replication |
Edit Pair Options |
Setting the pair options for TrueCopy or Universal Replicator |
Remote Replication |
Journal Owner |
Setting the journal ownership for Universal Replicator |
Remote Replication |
Journal Vol |
Creating or deleting journals or assigning journal volumes of Universal Replicator |
Remote Replication |
R-Cmd.Dev. |
Setting remote command devices of Universal Replicator |
Remote Replication |
Resync Pairs |
Resynchronizing pairs of TrueCopy, Universal Replicator, and global-active device |
Remote Replication |
Split Pairs |
Splitting pairs of TrueCopy or Universal Replicator |
Remote Replication |
Suspend Pairs |
Suspending pairs for global-active device |
Remote Replication |
UpdateQuorumDisks |
Editing the value of Read Response Guaranteed Time When Quorum monitoring has stopped for global-active device. |
SPM |
Change SPMGrp |
Server Priority Manager |
SPM |
Clear SPM Info |
Server Priority Manager |
SPM |
Default Set |
Server Priority Manager |
SPM |
Set All Prio Port |
Server Priority Manager |
SPM |
Set All Prio WWN |
Server Priority Manager |
SPM |
Set Ctrl Kind |
Server Priority Manager |
SPM |
Set Prio Port |
Server Priority Manager |
SPM |
Set Prio WWN |
Server Priority Manager |
SPM |
SPMGrp Del/Chg |
Server Priority Manager |
SPM |
Update Port WWN |
Server Priority Manager |
SPM |
Update SPMGrp |
Server Priority Manager |
SPM |
Update WWN |
Server Priority Manager |
UVM |
Add External Volumes |
Mapping external volumes |
UVM |
Assign MP Unit |
Assigning MP units for external volumes |
UVM |
Delete ES VOLs |
Releasing external volume mapping |
UVM |
Disconnect ES Paths |
Disconnecting external paths |
UVM |
Disconnect ES VOLs |
|
UVM |
Edit ES Path Config |
|
UVM |
Edit ES VOLs |
Editing external volume settings |
UVM |
Edit External WWNs / iSCSI Targets |
|
UVM |
Reconnect ES Paths |
Reconnecting external paths |
UVM |
Reconnect ES VOLs |
|
VM |
Del Migration Plans |
Volume Migration |
VM |
Migrate Volumes |
Volume Migration |
VPM |
Edit CLPR |
Creating, adding, deleting, or editing CLPR Migrating parity groups to a different CLPR |
VS |
Abort Shredding |
Stopping shredding LDEVs |
VS |
End Shredding |
Ending shredding LDEVs |
VS |
Shred LDEVs |
Shredding LDEVs |
Encryption Key operations
The following tables show the function names, operation names and event names related to encryption keys for data encryption, and each item is listed in alphabetical order.
Function Name |
Operation Name |
Corresponding GUI Operation |
ENC |
Add keys to DKC |
|
Backup Keys |
Backing up encryption keys on the key management server or backing up encryption keys as a file on the management client | |
Backup Keys to File |
Backing up encryption keys as a file on the management client | |
Backup Keys to Serv |
Backing up encryption keys on the key management server | |
Backup Keys to Serv(Auto) |
Automated backing up encryption keys on the key management server | |
Create KEK Dynamic |
| |
Create Keys |
| |
Create Keys On Serv |
| |
DEK assign SpareDisk |
Configuring encryption environment settings | |
DEK delete |
Configuring encryption environment settings | |
Delete and Create Keys |
| |
Delete KEK Dynamic |
| |
Delete Keys |
Deleting encryption keys | |
Delete Keys on Serv |
Deleting encryption keys backed up on the key management server | |
Delete Keys on Serv(Auto) |
Deleting encryption keys backed up automatically on the key management server | |
Disable Enhancement Of Encryption |
Disabling the settings used in the enhancement of encryption | |
Edit Encryption |
Enabling/disabling the encryption in a parity group level | |
Edit ENC Settings |
Configuring encryption environment settings | |
Edit Password Policy |
Editing password policies for backing up encryption keys | |
Register KEK Dynamic |
| |
Regular Backup Keys to Serv |
Backing up encryption keys on the key management server | |
Regular Delete Keys on Serv |
Request reception of deletion of the encryption key of the key management server | |
Rekey CEK |
| |
Rekey KEK Dynamic |
| |
Restore Keys |
Restoring encryption keys from back up copies on the key management server or the management client | |
Restore Keys fr File |
Restoring encryption keys from back up copies on the management client | |
Restore Keys fr File(Forcibly) |
Restoring encryption keys forcibly from back up copies on the management client | |
Restore Keys fr Serv |
Restoring encryption keys from back up copies on the key management server | |
Restore Keys fr Serv(Forcibly) |
Restoring encryption keys forcibly from back up copies on the key management server | |
Retry KEK Dynamic |
Reacquisition of key encryption keys | |
Set Up Key Mng Serv |
Configuring encryption environment settings | |
Succeeded Backup to Serv |
Setting of succeeded backup flag | |
KEK Acquisition |
Acquisition Key |
Reacquisition of key encryption keys |
Set Key | ||
Key Recovery |
Restore Keys fr Serv(Boot) |
Restoration of encryption keys |
Set Key Blob |
Function Name |
Event Name |
Output Trigger |
ENC |
Backup Keys |
When the encryption key is manually backed up as a file. |
Change CEK Status |
| |
Change DEK Status |
| |
Clear Keys |
When the encryption environment setting is initialized. | |
Create Keys |
When the encryption key is created. | |
Create Keys on DKC |
| |
Delete CEK |
When the encryption environment setting is initialized. | |
Delete DEK |
When the encryption environment setting is initialized. | |
Delete Keys |
When the encryption key is deleted. | |
Delete Spedified Key |
When the unused encryption key is deleted. | |
Restore Keys |
When the encryption key is restored. | |
Set CEK |
| |
Set DEK |
| |
Use Keys for CEK/KEK |
|
Command received from hosts
The following table shows the function name output to audit log files when receiving commands from hosts.
Note that the number of commands issued on CCI might not be the same as the number of commands output to audit log files. In the same way, the number of operations performed on Hitachi Storage Advisor Embedded might not be the same as the number of commands output to audit log files.
Function Name | Description |
Config Command | Indicates that a configuration command is received. Not indicate the completion of the operation. |
User Auth | Indicates that a user authentication command is received. Not indicate the completion of the operation. |
CHAP |
Indicates that the CHAP authentication is completed. |
PIN Deletion Tool operation
The following table shows the function name and the operation name related to PIN Deletion Tool.
Function Name | Operation Name | Corresponding GUI Operation |
PINDeletion | Delete | PIN deletion operations by PIN deletion tool |
Reproducing/losing Audit log
The following table shows the function name, event name, and triggering events that are output when the audit log file is reproduced or lost. The event name, "Create File", is output only once when the audit log file is reproduced automatically.
Function Name | Event Name | Output Trigger |
AuditLog | Create File | When abnormal files in the audit log are reproduced automatically. |
AuditLog | DKCAuditLog was lost | When the audit log created by commands received from hosts is lost. |