Skip to main content

We've Moved!

Product Documentation has moved to docs.hitachivantara.com
Hitachi Vantara Knowledge

Report examples: CSV files

Some Device Manager - Storage Navigator reports appear in CSV format. This topic describes reports that are saved in CSV format.

AllConf.csv

This is the concatenated file of all the csv files.

CacheInfo.csv

This CSV file contains information about the cache memory on the controller board. A record is created for each cache memory.

Item Content
Location Name of the cache controller board on which the memory is installed.
CMG#0 Size (GB)

CMG#1 Size (GB)

Cache memory capacity in the controller board per CMG (32/64/128/256/blank).

CMG#0 Size and CMG#1 Size are displayed.

Depending on the installed number of cache memory (DIMMs), one of the CMG capacities might be blank.

Cache Size (GB) Total cache memory capacity on the controller board (0 to 512)
SM Size (MB) The capacity that cannot be used as data cache memory in the total cache memory capacity inside of the controller board:
  • VSP E590: 0 to 94976
  • VSP E790: 0 to 103168
  • VSP E990: 0 to 114432
  • VSP E1090: 0 to 130048

The capacity per cluster is displayed.

Includes the shared memory capacity, cache directory capacity, and the fixed capacity.

Fixed capacity is the cache memory capacity that is used for controlling the storage system with the controller board.

CFM#0 Type

CFM#1 Type

Type of cache flash module (CFM) in the cluster: BM55, BM5E, BM65, BM6E, BM70, BM7E, blank. The number of CFM differs by model and the number of the displayed items are different.

CFM#0 Type and CFM#1 Type are displayed.

Depending on the installed CFM number, one of the CFM types might be displayed as blank.

Unified Hypervisor Cache Size (GB)Displayed only for VSP G/F700 and VSP G/F900.

Zero (0) is displayed for other storage system models.

ChapUserInfo.csv

This CSV file contains information about the iSCSI CHAP authenticated user registered to the port in the channel board. A record is created for each target related to the CHAP authenticated user.

Item

Content

Port

Port name

User Name

Name of the CHAP authenticated user1

iSCSI Target ID2

The iSCSI number of the target (00 to fe, hexadecimal)

Notes:

  1. If the character string contains a comma, the comma is converted to a tab.
  2. For the target information, see the record information with the same iSCSI target ID in IscsiTargetInfo.csv.

ChaStatus.csv

This CSV file contains information about the status of each channel board (CHB). A record is created for each CHB.

Item

Content

CHB Location

CHB name

PCB Status

Status of this CHB*

Port#00, #01, …, #03

Status of ports on this CHB*

* 1: Normal, 0: Abnormal

DeviceEquipInfo.csv

This CSV file contains information about equipment and devices that are part of the storage system, including DKC power supply, DB power supply, CHBB power supply, batteries, and BKMF. A record is created for each device.

Item Content
Device LocationDevice location name. For example:
  • For DKCPS: DKCPS-00
  • For DKUPS: DKUPS000-1
  • For Battery: BATTERY-1BA
  • For SVP: SVP-BASIC
Equip Status Equipment status of the device:
  • Equipped
  • Not Equipped
Status Status of the device:
  • Normal
  • Abnormal
  • Blank if "Equip Status" is Not Equipped
Type(VSP E1090) Type of the device:
  • BKMF
  • ACLF

This item is blank if the device location name is not BKMF.

This item is displayed only for VSP E1090.

DkaInfo.csv

This CSV file contains information about disk boards (DKBs). A record is created for each DKB.

Item Content
DKB Location DKB name
Package Type DKB type
  • Unencryption DKB (2Port)
  • Unencryption DKBN (2Port)
  • Encryption EDKB (2Port)
  • Encryption EDKBN (2Port)

The supported DKB types differ depending on the storage system model.

DkaStatus.csv

This CSV file contains information about the status of disk boards (DKBs). A record is created for each DKB.

Item

Content

DKB Location

DKB name

PCB Status

Status of this DKB1

BECON#00

Status of BECON1

BEPORT#0000 to #0001

Status of BEPORT on this DKB1

Items are output in the format BEPORT#XXYY, where:

  • XX: BE controller number (2-digit hexadecimal)
  • YY: BE port number (2-digit hexadecimal)

Notes:

  1. 1: Normal, 0: Abnormal

DkcInfo.csv

This CSV file contains information about the DKC. A record is created for each module.

When Module #1 is not installed, the record for Module #1 is not created.

Item Content
Storage System Type Storage system type

Output example: VSP E990

Serial Number # Serial product number (decimal, from 400001 to 499999)
IP Address IP address

Output example: xxx.xxx.xxx.xxx (decimal, 0 to 255)

Subnet Mask Subnet mask

Output example: xxx.xxx.xxx.xxx (decimal, 0 to 255)

Number of CUs Number of CUs (decimal, 0 to 255)
Number of DKBs Number of DKBs (decimal, 0 to 8)

Zero (0) is sometimes displayed if no drives are installed.

Configuration Type Configuration type

Output example: PCM

Model Storage system model (for example, MH4)
Unified ModeDisplayed only for VSP G/F700 and VSP G/F900.

Off is displayed for other storage system models.

DkuTempAveInfo.csv

This CSV file contains information about DB temperature for every two hours. A record is DB temperature information obtained from the environment monitor. A record output to the first line shows the latest temperature information. Because DB temperature information is measured by DBPS, items are displayed in this unit.

DkuTempAveInfo.csv shows the average temperature as DB temperature data. The maximum number of items depends on the storage system model:

  • VSP E590 and VSP E790 with DBS2: 21
  • VSP E590 and VSP E790 without expansion drive box: 17
  • VSP E990: 9
  • VSP E1090 with DBS2: 73
  • VSP E1090 with DBN: 9
  • VSP E1090 without expansion drive box: 65

The DB temperature data displayed in DkuTempAveInfo.csv (average temperature only), DkuTempMaxInfo.csv (maximum temperature only), and DkuTempMinInfo.csv (minimum temperature only) is the same value as the DB temperature data for DkuTempInfo.csv.

If the system is in maintenance mode or the SVP is rebooted, the data that is output every two hours might not contain data for the period. If a failure occurs in the storage system, the correct information might not be output.

Item Description
Date Year, month, and date when temperature data was acquired in the format:

YYYY/MM/DD hh:mm:ss

DB00 DBPS001

Temperature average

Average temperature (°C) for the two-hour period of DB00 DBPS001
DB47 DBPS472

Temperature average

Average temperature (°C) for the two-hour period of DB47 DBPS472

For VSP E590 andVSP E790, this item shows up to DB61 DBPS612.

For VSP E990, this item shows up to DB03 DBPS032.

For VSP E1090, this item shows up to DB69 DBPS692.

Note: An item name is displayed as DBxx DBPSxxy. The names are listed in ascending order of the DB number. See DkuTempInfo.csv for locations and values for DBxx and DBPSxxy.

DkuTempInfo.csv

This CSV file contains information about DB temperature for every two hours. A record is DB temperature information obtained from the environment monitor. A record output to the first line shows the latest temperature information. Because DB temperature information is measured by DBPS, items are displayed in this unit.

DkuTempInfo.csv shows the average temperature, maximum temperature, and minimum temperature as DB temperature data. The maximum number of items depends on the storage system model:

  • VSP E590 and VSP E790 with DBS2: 61
  • VSP E590 and VSP E790 without expansion drive box: 49
  • VSP E990: 25
  • VSP E1090 with DBS2: 217
  • VSP E1090 with DBN: 25
  • VSP E1090 without expansion drive box: 193

The DB temperature data displayed in DkuTempAveInfo.csv (average temperature only), DkuTempMaxInfo.csv (maximum temperature only), and DkuTempMinInfo.csv (minimum temperature only) is the same value as the DB temperature data for DkuTempInfo.csv.

If the system is in maintenance mode or the SVP is rebooted, the data that is output every two hours might not contain data for the period. If a failure occurs in the storage system, the correct information might not be output.

An item name is displayed as DBxx DBPSxxy. The names are listed in ascending order of the DB number.

Item Description
Date Year, month, and date when temperature data was acquired in the format:

YYYY/MM/DD hh:mm:ss

DB00 DBPS001 Temperature average Average temperature (°C) for the two-hour period of DB00 DBPS001
DB00 DBPS001 Temperature maximum value Maximum temperature (°C) for the two-hour period of DB00 DBPS001
DB00 DBPS001 Temperature minimum value Minimum temperature (°C) for the two-hour period of DB00 DBPS001
DB47 DBPS472 Temperature average Average temperature (°C) for the two-hour period of DB47 DBPS472
  • VSP E590 and VSP E790, this item shows up to DB61 DBPS612.
  • For VSP E990, this item shows up to DB03 DBPS032.
  • For VSP E1090, this item shows up to DB69 DBPS692.
DB47 DBPS472

Temperature maximum value

Maximum temperature (°C) for the two-hour period of DB47 DBPS472
  • VSP E590 and VSP E790, this item shows up to DB61 DBPS612.
  • For VSP E990, this item shows up to DB03 DBPS032.
  • For VSP E1090, this item shows up to DB69 DBPS692.
DB47 DBPS472

Temperature minimum value

Minimum temperature (°C) for the two-hour period of DB47 DBPS472
  • VSP E590 and VSP E790, this item shows up to DB61 DBPS612.
  • For VSP E990, this item shows up to DB03 DBPS032.
  • For VSP E1090, this item shows up to DB69 DBPS692.

The following tables list DBxx and DBPSxxy: xx values, where

  • xx is a value from 00 to 61 for VSP E590 and VSP E790.
  • xx is a value from 00 to 03 for VSP E990.
  • xx is a value from 00 to 69 for VSP E1090.
DB # 0 1 2… (omitted) 4647
xx 00 01 02...46 47
DBxx DB00 DB01 DB02...DB46 DB47
DBxxy DBPS00y DBPS01y DBPS02y...DBPS46y DBPS47y

The following table lists the DBPSxxy: y values (where DB# is 0 and xx is 00)

DB# 0
y 1 2
DBPSxxy: y DBPS001 DBPS002

DkuTempMaxInfo.csv

This CSV file contains information about DB temperature for every two hours. A record is DB temperature information obtained from the environment monitor. A record output to the first line shows the latest temperature information. Because DB temperature information is measured by DBPS, items are displayed in this unit.

DkuTempMaxInfo.csv shows the maximum temperature as DB temperature data. The maximum number of items depends on the storage system model:

  • VSP E590 and VSP E790 with DBS2: 21
  • VSP E590 and VSP E790 without expansion drive box: 17
  • VSP E990: 9
  • VSP E1090 with DBS2: 73
  • VSP E1090 with DBN: 9
  • VSP E1090 without expansion drive box: 65

The DB temperature data displayed in DkuTempAveInfo.csv (average temperature only), DkuTempMaxInfo.csv (maximum temperature only), and DkuTempMinInfo.csv (minimum temperature only) is the same value as the DB temperature data for DkuTempInfo.csv.

If the system is in maintenance mode or the SVP is rebooted, the data that is output every two hours might not contain data for the period. If a failure occurs in the storage system, the correct information might not be output.

An item name is displayed as DBxx DBPSxxy. The names are listed in ascending order of the DB number. See DkuTempInfo.csv for locations and values for DBxx and DBPSxxy..

Item Description
Date Year, month, and date when temperature data was acquired in the format:

YYYY/MM/DD hh:mm:ss

DB00 DBPS001

Temperature maximum value

Maximum temperature (°C) for the two-hour period of DB00 DBPS001
DB47 DBPS472

Temperature maximum value

Maximum temperature (°C) for the two-hour period of DB47 DBPS472

For VSP E590 and VSP E790, this item shows up to DB61 DBPS612.

For VSP E990, this item shows up to DB03 DBPS032.

For VSP E1090, this item shows up to DB69 DBPS692.

DkuTempMinInfo.csv

This CSV file contains information about DB temperature for every two hours. A record is DB temperature information obtained from the environment monitor. A record output to the first line shows the latest temperature information. Because DB temperature information is measured by DBPS, items are displayed in this unit.

DkuTempMinInfo.csv shows the minimum temperature as DB temperature data. The maximum number of items depends on the storage system model:

  • VSP E590 and VSP E790 with DBS2: 21
  • VSP E590 and VSP E790 without expansion drive box: 17
  • VSP E990: 9
  • VSP E1090 with DBS2: 73
  • VSP E1090 with DBN: 9
  • VSP E1090 without expansion drive box: 65

The DB temperature data displayed in DkuTempAveInfo.csv (average temperature only), DkuTempMaxInfo.csv (maximum temperature only), and DkuTempMinInfo.csv (minimum temperature only) is the same value as the DB temperature data for DkuTempInfo.csv.

If the system is in maintenance mode or the SVP is rebooted, the data that is output every two hours might not contain data for the period. If a failure occurs in the storage system, the correct information might not be output.

Item Description
Date Year, month, and date when temperature data was acquired in the format:

YYYY/MM/DD hh:mm:ss

DB00 DBPS001

Temperature minimum value

Minimum temperature (°C) for the two-hour period of DB00 DBPS001
DB47 DBPS472

Temperature minimum value

Minimum temperature (°C) for the two-hour period of DB47 DBPS472
  • For VSP E590, VSP E790, this item shows up to DB61 DBPS612.
  • For VSP E990, this item shows up to DB03 DBPS032.
  • For VSP E1090, this item shows up to DB69 DBPS692.

ELunInfo.csv

This CSV file contains information about external volumes. Information about one external volume is output to multiple records according to the number of prioritized paths between the local and the external storage systems.

For details about external volumes, see the Hitachi Universal Volume Manager User Guide.

Item Content
VDEV# Virtual device number to which the external volume is mapped
Characteristic1 Identification number of the external volume

If the character string contains a comma, the comma is converted to a tab.

Characteristic2 Extended information for identifying the external volume
Device Product name reported to the host by the external volume

If the character string contains a comma, the comma is converted to a tab.

Capacity(blocks) Capacity of the external volume (in blocks)
Cache Mode Indicates whether the write data from the host to the external storage system is reflected synchronously or asynchronously
  • Enabled: Asynchronously
  • Disabled: Synchronously
ECC Group Number of parity group to which the external volume is mapped.

If the number starts with "E" (for example, E1-1), the parity group contains external volumes.

Range of values: E1-1 to E16384-4096

Current MPU Number and name of a current MP unit controlling the parity group to which the external volume is mapped
  • MPU-10
  • MPU-20
Setting MPU Number and name of an MP unit configured to control the external volume indicated by ECC Group
  • MPU-10
  • MPU-20
Vendor Vendor name of the external storage system
Product Name Product name of the external storage system
Serial Number# Serial product number of the external storage system
Path Mode Mode which indicates how the paths between local and external storage systems operate
  • Multi
  • Single
  • ALUA
Port Name of a local port from which the external path is connected to the external storage system
WWN Port identifier number of the external storage system

This item is blank when the "Package Type" is iSCSI.

LUN LU number set for the external volume.
Priority Priority of the paths between the storage systems to be used for connection with the external volume.

"1" indicates the path with the highest priority.

Status Status of the path between storage systems.
  • Normal
  • Blocked
IO TOV I/O timeout value for the external volume

Range of values: 5 to 240

QDepth The number of Read/Write commands that can be issued to the external volume at a time

Range of values: 2 to 128

Resource Group ID (ECC Group) Resource group ID for the parity group that is mapping external volumes (in decimal format)

Range of values: 0 to 1023

Resource Group Name (ECC Group)

Resource group name of the parity group that is mapping external volumes

Load Balance Mode I/O load balance distribution logic specified for external volume:
  • Normal Round-robin
  • Extended Round-robin
  • Disabled
  • - (hyphen): Single is specified in Path Mode.
Path Mode on Profile Path mode on profile information of the external storage system:
  • Multi
  • Single
ALUA Settable Indicates whether ALUA mode can be set as path mode on the external storage system
  • Yes: ALUA mode can be set
  • No: ALUA mode cannot be set
ALUA Permitted Indicates whether ALUA is used as path mode on the local storage system:
  • Enabled: ALUA mode is used
  • Disabled: ALUA mode is not used
Target Port Asymmetric Access State Status of the port on the external storage system when the path mode is ALUA:
  • Active/Optimized
  • Active/Non-Optimized
  • Blank: The path mode is other than ALUA.
Package Type Type of CHB to which a port of the local storage system connecting to the external storage system belongs:
  • Output example for FC: 16FC2 (CHB), 32FC4R (CHB)
  • Output example for iSCSI: 10iSCSI2o (CHB), 10iSCSI2c (CHB)
IP Address IP address for an iSCSI target of an external storage system
  • IPv6:

    XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX (hexadecimal)

  • IPv4:

    XXX.XXX.XXX.XXX (decimal)

  • Blank: The "Package Type" is other than iSCSI.
TCP Port Number TCP port number (1 through 65535) for the iSCSI target of an external storage system

This item is blank when the "Package Type" is other than iSCSI.

iSCSI Target Name iSCSI target name of an external storage system

This item is blank when the "Package Type" is other than iSCSI.

Virtual Port IDVirtual port number of own storage system to which external storage system is connected.

If Virtual Port Mode is Disabled, this column to be blanked.

EnvMonInfo.csv

This CSV file contains information about the power and temperature of the storage system. Power and temperature measurements from the environment monitor are recorded every 2 hours.

No records are created if the storage system is turned off. If the system is in maintenance mode or the SVP is rebooted, up to 2 hours of records could be lost.

If a failure occurs in the storage system, the correct information might not be output.

A hyphen(-) is displayed if the power and temperature information cannot be acquired due to a unit or network failure.

Item Description
Date Year, month, and date when record data was acquired for the 2-hour period in the format:

YYYY/MM/DD HH:MM:SS

Electric power average Average value of electric power (W)
Electric power maximum value Maximum value of electric power (W)
Electric power minimum value Minimum value of electric power (W)

In the following cases, a lower value might be temporarily displayed:

  • When the storage system is starting up
  • Right after replacing storage system parts
  • During or after microcode/firmware update
DKC0 CLT01 Temperature average DKC0: Average temperature of CLT01 (°C)
DKC0 CLT01 Temperature maximum value DKC0: Maximum temperature of CLT011 (°C)
DKC0 CLT01 Temperature minimum value DKC0: Minimum temperature of CLT01 (°C)
DKC5 CLT52 Temperature average DKC5 CLT52: Average temperature of CL2 (°C)
DKC5 CLT52 Temperature maximum value DKC5 CLT52: Maximum temperature of CL2 (°C)
DKC5 CLT52 Temperature minimum value DKC5 CLT52: Minimum temperature of CL2 (°C)

FcSpNameInfo.csv

This CSV file contains information about Fibre Channel Security Protocols (FCSPs). A record is created for each initiator (host).

For details of port setting, see the Provisioning Guide.

Item

Content

Port

Port name

Host Group

Host group name

Target Username

WWN information about the storage system required for authentication (16-digit hexadecimal number)

Authentication of Group

Information about whether to perform authentication or not

  • Enabled
  • Disabled

Initiator Username

WWN information about the host required for authentication (16-digit hexadecimal number)

Protocol

Protocol used for authentication ("CHAP" or blank)

FcSpPortInfo.csv

This CSV file contains information about ports related to Fibre Channel Security Protocols (FCSPs). A record is created for each port.

For details of port setting, see the Provisioning Guide.

Item

Content

Port

Port name

Time out(Sec)

Time interval (in seconds) before retrying authentication in case of failure in authentication

Refusal Intvl.(Min)

Time interval (in minutes) before starting next authentication in case of failure in authentication for the number of times displayed by "Refusal Freq(Counts)"

Refusal Freq.(Counts)

Number of times of authentication allowable for connection to a port

Switch Port Username

WWN information about the Fabric switch required for authentication (16-digit hexadecimal number)

Mode

Mode of authentication between ports and FC switches

  • Bidirectional
  • Unidirectional

Authentication of Fabric Switch

Information about whether to perform authentication of the FC switch identified by "Switch Port Username"

  • Enabled
  • Disabled

HduInfo.csv

This CSV file contains information about hard drive boxes (DB). A record is created for each drive box.
NoteMultiple DBs (for example, DB00&01) that are output to DB Location are DBs that have multiple DB information internally in one physical DB. For these DBs, one record is output for each DB information set although all records have the same contents. You can also check the DB Location output to this CSV in the Physical View report.

Example:

DB Location,DB Status,Slot Size,DB Type
DB00,Installed,2.5,DBN
DB50&51,Installed,2.5,DBS2
DB50&51,Installed,2.5,DBS2
DB52&53,Installed,2.5,DBS2
DB52&53,Installed,2.5,DBS2
DB54,Installed,3.5,DB60
DB55,Installed,3.5,DB60
DB56,Installed,3.5,DB60
DB57,Installed,3.5,DB60
DB58,Installed,3.5,DB60
DB59,Installed,3.5,DB60
DB60,Installed,3.5,DB60
DB61,Installed,3.5,DB60
Item Description
DB Location DB location name
DB Status Information about whether this DB is installed
  • Installed
  • Not installed
Slot Size Slot size (inches)
  • 2.5
  • 3.5
  • Blank for DBF (FMD or FMD DC2).
DB TypeDB type
  • DBS (DB for 2.5-inch drives)
  • DBL (DB for 3.5-inch drives)
  • DB60 (dense drive box for 3.5-inch drives)
  • DBF (DB for FMD or FMD DC2, 2PORT)
  • DBN (DB for 2.5-inch NVMe drives)
  • DBS2 (DB for 2.5-inch drives)

IscsiHostInfo.csv

This CSV file contains information about iSCSI Initiator (Host) set to the channel board port. A record is created for each iSCSI Host (Initiator) target.

Item

Content

Port

Port name

iSCSI Name

iSCSI host name

Host Name

Nickname for iSCSI host name

iSCSI Target ID1

iSCSI target number (hexadecimal format, 00 to fe)

Notes:

  1. For the target information, see the record information with the same iSCSI target ID in IscsiTargetInfo.csv.

IscsiPortInfo.csv

This CSV file contains information about iSCSI information set to the channel board port. A record is created for each iSCSI host (initiator) target.

Item

Content

Port

Port name

IPv4 | IP Address

IPv4 address

Output example: xxx.xxx.xxx.xxx (decimal)

IPv4 | Subnet Mask

IPv4 subnet mask (decimal)

Output example: xxx.xxx.xxx.xxx (decimal)

IPv4 | Default Gateway

Port IPv4 default gateway

Output example: xxx.xxx.xxx.xxx (decimal)

IPv6 | Mode

Port IPv6 settings

  • Enabled
  • Disabled

IPv6 | Link Local Address

Port IPv6 link local address

  • Output example: xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx (hexadecimal)
  • Output example: Auto

Auto is displayed if the link local address is automatically set. Blank if "IPv6 | Mode" is Disabled.

IPv6 | Global Address

IPv6 global address of the port

  • Output example: xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx (hexadecimal)
  • Output example: Auto

Auto is displayed if the global address is automatically set. Blank if "IPv6 | Mode" is Disabled.

IPv6 | Assigned Default Gateway

Port IPv6 assigned default gateway

  • Output example: xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx (hexadecimal)

Blank if "IPv6 | Mode" is Disabled.

Channel Speed

Data transfer speed of the port (for example, 1G, 10G, Auto)

Security Switch

Port security switch settings

  • On
  • Off

TCP Port Number

The number of the port for using socket (1 to 65535)

Ethernet MTU Size (Byte) | MTU

MTU settings

  • 1500
  • 4500
  • 9000

Keep Alive Timer (sec.)

Keep alive timer value of iSCSI (30 to 64800) (sec)

Selective ACK

Selective ACK mode

  • Enabled
  • Disabled

Delayed ACK

Delayed ACK mode

  • Enabled
  • Disabled

Maximum Window Size (KB)

Window scale option settings

  • 64KB
  • 128KB
  • 256KB
  • 512KB
  • 1024KB

iSNS Server | Mode

iSNS mode settings

  • On
  • Off

iSNS Server | IP Address

IP address of the iSNS server

  • IPv4: xxx.xxx.xxx.xxx (decimal)
  • IPv6: xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx (hexadecimal)
  • Blank if "iSNS Server | Mode" is Off.

iSNS Server | TCP Port Number

Port number of TCP used for iSNS (1 to 65535).

Blank if "iSNS Server | Mode" is Off.

VLAN | Tagging Mode

VLAN tagging mode set to the port

  • On
  • Off

VLAN | ID

VLAN number set to the port (1 to 4094)

Blank if "VLAN | Tagging Mode" is set to Off.

Resource Group ID (Port)

Resource group ID of the port (0 to 1023 in decimal)

Resource Group Name(Port)

Resource group name of the port

iSCSI Name

iSCSI name of the port

CHAP User Name

Authenticated user name of the port

IPv6 | Global Address 2

IPv6 global address 2 of the port

  • Output example: xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx (hexadecimal)
  • Output example: Auto

Auto is displayed if the global address 2 is automatically set. Blank if "IPv6 | Mode" is Disabled.

Virtual Port Mode

Virtual port mode of the port

  • Enabled
  • Disabled

IscsiTargetInfo.csv

This CSV file contains information about iSCSI target information set to the channel board port. A record is created for each iSCSI target.

Item

Content

Port

Port name

iSCSI Target Alias

iSCSI target alias

iSCSI Target ID

Number of the iSCSI target (00 to fe, hexadecimal)

iSCSI Target Name

Name of the iSCSI target

Host Mode

Host mode set to the iSCSI target (hexadecimal)

Host Mode Option

Host mode option set to the iSCSI target (decimal)

Separated with a semicolon (;) if multiple host mode options are set.

Security Switch

Security switch status set to the iSCSI target port

  • On
  • Off

Authentication | Method

Authentication method settings of the iSCSI target

  • CHAP
  • None
  • Comply with Host Setting

Authentication | Mutual CHAP

Mutual CHAP authentication function settings of the iSCSI target

  • Enabled
  • Disabled

Authentication | User Name

User name set when iSCSI target was authenticated

Resource Group ID (iSCSI Target)

Resource group ID of the iSCSI target (0 to 1023)

Resource Group Name (iSCSI Target)

Resource group name of the iSCSI target

JnlInfo.csv

This CSV file contains information about journals. A record is created for each journal.

Item Content
JNL# Journal number (in hexadecimal)
Current MPU Number and name of MP unit currently controlling the journal

(MPU-10, MPU-20)

Setting MPU Number and name of MP unit configured to control the journal

(MPU-10, MPU-20)

LdevCapaInfo.csv

This CSV file contains information about LDEV capacities. A record is created for each of the classifications shown in "Volume Kind".

Item

Content

Volume Kind

The following classifications are output:

  • Internal OPEN Volumes
  • External OPEN Volumes
  • Total OPEN Volumes

Allocated LDEV Capacity (GB)

Allocated LDEV capacity

Unallocated LDEV Capacity (GB)

Unallocated LDEV capacity

Reserved Capacity (GB)

Reserved LDEV capacity

Total Volume Capacity (GB)

Total capacity of "Allocated LDEV Capacity", "Unallocated LDEV Capacity" and "Reserved Capacity"

Free Space (GB)

Free Space

Total Capacity (GB)

Total Capacity

The sum of "Total Volume Capacity" and "Free Space"

LdevCountInfo.csv

This CSV file contains information about the number of logical devices (LDEVs). A record is created for each of the classifications shown in "Volume Kind".

Item Content

Volume Kind

The following classifications are output:

  • Internal Volumes
  • External Volumes
  • Total Volumes

Allocated OPEN LDEVs

Number of allocated open-system volumes (LDEVs)

Unallocated OPEN LDEVs

Number of unallocated open-system volumes (LDEVs)

Reserved OPEN LDEVs

Number of reserved open-system volumes (LDEVs)

V-VOL

Number of virtual volumes

This item is output only when "Volume Kind" is Total Volumes.

This item is blank when "Volume Kind" is Internal Volumes or External Volumes.

Total(All LDEVs)

Total number of LDEVs

ECC Groups

Total number of parity groups

LdevInfo.csv

This CSV file contains information about logical devices (LDEVs). A record is created for each LDEV.

Item

Content

ECC Group

Number of parity group where the LDEV belongs.

Output example: X-Y (decimals)

  • If the number starts with "E" (for example, E1-1), the parity group contains external volumes.
  • If "LDEV Type" is Dynamic Provisioning or Thin Image, a hyphen is output.

LDEV#

LDEV number (00:00:00 to 00:fe:ff)

LDEV Name

LDEV name

If the character string contains a comma, the comma is converted to a tab.

LDEV Emulation

LDEV emulation type

LDEV Type

LDEV type:

  • Basic
  • Dynamic Provisioning
  • External
  • Thin Image
  • ALU

LDEV Attribute

LDEV Attribute:

  • CMDDEV (Command device)
  • CMDDEV (Remote command device)

    If the character string contains a comma, the comma is converted to a tab.

  • Journal (Journal volume)
  • Pool (Pool volume)
  • Quorum disk (used with global-active device)
  • ALU
  • SLU
  • Deduplication system data volume (fingerprint)
  • Deduplication system data volume (data store)
  • Nondisruptive migration
  • Regular (Others)

Volume Size(Cyl)

LDEV capacity (in cylinders)

Note: This item is not applicable (the output value is not valid).

Volume Size(MB)

LDEV capacity (in MB)

Volume Size(Blocks)

LDEV capacity (in blocks)

CVS

Information about whether the LDEV is a custom-sized volume:

  • On: Custom-sized volume
  • Off: Others

Pool ID

Pool number. This item is blank except in the following cases:

  • If the LDEV type is Dynamic Provisioning.
  • If LDEV attribute is Pool.

RAID Concatenation#0

Number of parity group to be concatenated to parity group (#0) identified by ECC Group. Blank if the parity group is not concatenated to another parity group.

RAID Concatenation#1

Number of parity group to be concatenated to parity group (#1) identified by ECC Group. Blank if the parity group is not concatenated to another parity group.

RAID Concatenation#2

Number of parity group to be concatenated to parity group (#2) identified by ECC Group. Blank if the parity group is not concatenated to another parity group.

ORACLE CHECK SUM

Information about whether this LDEV is an Oracle checksum target.

  • On
  • Off

Current MPU

Number of the MP unit currently controlling the LDEV.

(MPU-10, MPU-20)

Setting MPU

Number of the MP unit configured to control LDEV.

(MPU-10, MPU-20)

Allocated

Information about whether the host can access the LDEV.

  • Y: The host can access the volume.
  • N: The host cannot access the volume.

Pool Name

Name of the pool:

  • If the provisioning type is Dynamic Provisioning, the name of the pool related to the logical volume is displayed.

    If the character string contains a comma, the comma is converted to a tab.

  • If the attribute is Pool, the name of the pool to which the logical volume belongs is displayed.

    If the character string contains a comma, the comma is converted to a tab.

  • When neither of the above is displayed, the pool name is blank.

CmdDevSecurity

Indicates whether Security is specified as the attribute for the command device.

  • Enabled: Command device security setting is set.
  • Disabled: Command device security setting is not set.
  • Blank: "LDEV Attribute" is not CMDDEV.

CmdDevUserAuth

Indicates whether User Authentication is specified as the attribute for the command device.

  • Enabled: User authentication setting is set.
  • Disabled: User authentication setting is not set.
  • Blank: "LDEV Attribute" is not CMDDEV.

CmdDevDevGrpDef

Indicates whether Device Group Definition is specified as the attribute for the command device.

  • Enabled: Device group definition setting is set.
  • Disabled: Device group definition setting is not set.
  • Blank: "LDEV Attribute" is not CMDDEV.

Resource Group ID (LDEV)

LDEV resource group ID (number in the decimal format)

Resource Group Name (LDEV)

LDEV resource group name (0 to 1,023, decimal)

Encryption

Indicates whether the parity group identified by ECC Group is encrypted.

  • For internal volumes: Enabled (encrypted) or Disabled (not encrypted)
  • For external volumes: blank

T10 PI

T10 PI attribute set for the LDEV:

  • Enabled
  • Disabled
  • Blank if "LDEV Emulation" is not OPEN-V.

ALUA Mode

Indicates whether the ALUA mode is enabled.

  • Enabled: ALUA mode is enabled.
  • Disabled: ALUA mode is disabled.

Accelerated Compression

Indicates whether accelerated compression is enabled.

For internal volumes:

  • Enabled: accelerated compression is enabled.
  • Disabled: accelerated compression is disabled.

If the parity group with LDEV does not support accelerated compression, a blank space is displayed. Also, for external volumes, a blank is displayed.

Namespace IDNamespace ID of the LDEV

This item is displayed only for VSP E1090.

This item is blank if the LDEV is not set as a namespace.

LdevStatus.csv

This CSV file contains information about the status of logical devices (LDEVs). A record is created for each LDEV.

Item

Content

VDEV#

Virtual device number in which the LDEV is defined

VDEV Status

VDEV status of "VDEV#"

  • 1: Normal
  • 0: Abnormal

HDEV#

LDEV number

HDEV Status

LDEV status

  • 1: Normal
  • 0: Abnormal

LDEV Emulation

LDEV emulation type

ECC Group

Number of the parity group where the LDEV belongs.

  • If the number starts with "E" (for example, E1-1), the parity group contains external volumes.
  • If the type of the LDEV is a Dynamic Provisioning or Thin Image virtual volume, a hyphen is output.

    Refer to "LdevInfo.csv" for information about the LDEV type.

LPartition.csv

This CSV file contains information about the cache logical partitioning function. A record is created for each cache partition for a managed resource.

For details about the cache logical partitioning function, see the Performance Guide.

Item Content
CLPR# CLPR ID (in decimal)
CLPR Name CLPR name
Cache Size(MB) Cache size allocated to this CLPR (in MB)
ECC Group Number of parity group allocated to this CLPR
  • If the number starts with "E" (for example, E1-1), the parity group contains external volumes.
  • If the type of the LDEV is a Dynamic Provisioning or Thin Image virtual volume, a hyphen (-) is output.

    Refer to "LdevInfo.csv" for information about the LDEV type.

LDEV#(V-VOL) LDEV number allocated to this CLPR:
  • VSP E590: 00:00:00 to 00:7f:ff
  • VSP E790: 00:00:00 to 00:bf:ff
  • VSP E990: 00:00:00 to 00:fe:ff
  • VSP E1090: 00:00:00 to 00:fe:ff

The type of this LDEV is Dynamic Provisioning, Thin Image, or ALU.

This item is blank if no LDEV is assigned to the CLPR ID.

LunInfo.csv

This CSV file contains information about LU path definitions. A record is created for each set of LU path definitions that belongs to a host group. When only the port name (Port) is output, it indicates that no LU path is defined for the port (which is used only for a remote path or an external path). For more information about LU path definitions, see the Provisioning Guide.

Item

Description

Port

Port name

Host Group

Host group name

If "Package Type" is iSCSI, the iSCSI target alias is output.

Host Mode

Host mode specified for this host group (hexadecimal)

Host Mode Option

Host mode option set for this host group (decimal)

If more than one option is specified, the options are separated by semicolons (;).

This item is blank when no host mode option has been specified.

LUN#

LUN number for this LU path definition (hexadecimal)

This item is blank when no LU path is defined for the host group.

LDEV#

LDEV number for this LU path definition

This item is blank when no LU path is defined for the host group.

Command Device

Information about whether the LDEV is a command device:

  • On: Command Device
  • On*: Remote Command Device
  • Off: Others
  • Blank: No LU path is defined for the host group.

Command Security

Information about whether the command device is secured:

  • On
  • Off
  • Blank: No LU path is defined for the host group.

CVS

Information about whether the LDEV is a custom-sized volume:

  • On: Customized volume
  • Off: Other volumes
  • Blank: No LU path is defined for the host group.

CHB Location

Name of the CHB on which this port is installed

Output example: CHB-1D

Package Type

CHB type for CHB Location

Output example for Fibre: 32FC4R (CHB)

Output example for iSCSI: 10iSCSI2c (CHB)

Resource Group ID (Host Group)

Resource group ID of a host group (0 to 1,023, decimal)

Resource Group Name (Host Group)

Resource group name of a host group

T10 PI Mode

Indicates whether the T10 PI mode can be applied to the port for which the LU path is defined:

  • Enabled
  • Disabled
  • Blank: "Package Type" does not support T10 PI mode.

T10 PI

Information about the T10 PI attribute which is set for the LDEV number of the LU path definition.

  • Enabled
  • Disabled
  • Blank: The LDEV# is blank.

Asymmetric Access State

Asymmetric access status

Indicates the asymmetric access status:

  • Active/Optimized: Prioritized
  • Active/Non-Optimized: Lower priority
  • Blank: "Package Type" is iSCSI

LunPortInfo.csv

This CSV file contains information about LU path definition. A record is created for each port.

For details of LU path definition, see the Provisioning Guide.

Item

Content

Port

Port name

Security Switch

The setting status of the security switch:

  • On
  • Off

Port Address

Port address (2-digit hexadecimal number) 00 to ff

This item is blank when "Package Type" is iSCSI.

Loop ID

Port address (0 - 125, decimal)

This item is blank when "Package Type" is iSCSI.

Fabric

Setting status of the Fabric switch:

  • On
  • Off
  • Blank: "Package Type" is iSCSI.

Connection

Fibre topology setting:

  • Point to Point
  • FC-AL
  • Blank: "Package Type" is iSCSI.

Channel Speed

Channel speed of this port (for example, 4G, 10G, 32G)

WWN

WWN of this port (hexadecimal number)

This item is blank when "Package Type" is iSCSI.

CHB Location

CHB on which the port is installed.

Package Type

CHB type for CHB Location

Output example for Fibre: 32FC4R (CHB)

Output example for iSCSI: 10iSCSI2c (CHB)

T10 PI Mode

Indicates whether the T10 PI mode can be applied to the port:

  • Enabled
  • Disabled
  • Blank: "Package Type" does not support T10 PI mode.

MicroVersion.csv

This CSV file contains information about software versions.

Software versions for VSP E590, VSP E790
ItemContent
DKCMAINThe version of the firmware for the RAID storage system (10 digits)
ROM BOOTROM BOOT firmware version (6 digits)
RAM BOOTRAM BOOT firmware version (6 digits)
ConfigConfig version (8 digits)
HDDHDD firmware version (4 digits)

Displayed in HDD device type cord: version format.

A colon is displayed when no HDDs are installed.

CFMCFM firmware version (8 digits)
Printout ToolPrintout tool version (xx-yy-zz-mm/aa)
CHB(FC32G)32G FC protocol chip firmware version (8 digits)
CHB(iSCSI)CHB9(iSCSI) protocol chip firmware version (8 digits)
GUMGUM firmware version (8 digits)
CTL_NSWCTL_NSW firmware version (6 digits)
CTL_eDKBNCTL_eDKBN firmware version (6 digits)
Expander1Expander firmware version (6 digits)
DKB1DKBN firmware version (6 digits)
DKBN2DKBN firmware version (6 digits) (not supported on VSP E590, VSP E790)
NSW2NSW firmware version (6 digits) (not supported on VSP E590, VSP E790)
Unified HypervisorDisplayed only for VSP G/F700 and VSP G/F900.
NASFWINSTDisplayed only for VSP G/F700 and VSP G/F900.
NASFWDisplayed only for VSP G/F700 and VSP G/F900.
Notes:
  1. These items are output only when the firmware version is 93-05-02 or later.
  2. These items are output only when the firmware version is 93-06-21 or later.
Software versions for VSP E990
ItemContent
DKCMAINThe version of the firmware for the RAID storage system (10 digits)
ROM BOOTROM BOOT firmware version (6 digits)
RAM BOOTRAM BOOT firmware version (6 digits)
ConfigConfig version (8 digits)
HDDHDD firmware version (4 digits)

A colon is displayed for VSP E990.

CFMCFM firmware version (8 digits)
Printout ToolPrintout tool version (xx-yy-zz-mm/aa)
CHB(FC32G)32G FC protocol chip firmware version (8 digits)
CHB(iSCSI)CHB9(iSCSI) protocol chip firmware version (8 digits)
GUMGUM firmware version (8 digits)
DKBNDKBN firmware version (6 digits)
NSWNSW firmware version (6 digits)
EDKBNEDKBN firmware version (6 digits)
Software versions for VSP E1090
ItemContent
DKCMAINThe version of the firmware for the RAID storage system (10 digits)
ROM BOOTROM BOOT firmware version (6 digits)
RAM BOOTRAM BOOT firmware version (6 digits)
ConfigConfig version (8 digits)
HDDHDD firmware version (4 digits)

Displayed in HDD device type cord: version format.

A colon is displayed when no HDDs are installed.

CFMCFM firmware version (8 digits)
Printout ToolPrintout tool version (xx-yy-zz-mm/aa)
CHB(FC32G)32G FC protocol chip firmware version (8 digits)
CHB(iSCSI)CHB9(iSCSI) protocol chip firmware version (8 digits)
GUMGUM firmware version (8 digits)
DKBDKB firmware version (6 digits)
DKBNDKBN firmware version (6 digits)
NSWNSW firmware version (6 digits)
EDKBNEDKBN firmware version (6 digits)
ExpanderExpander firmware version (6 digits)

MlcEnduranceInfo.csv

This CSV file contains information about endurance information of MLC. A record is created for each MLC endurance information.

If you change the SVP time 1 month or more, the history acquisition months will not be in order.

Item

Content

ECC Group

Number of parity groups of which this MLC (including FMD and FMD DC2 ) is a component.

  • If it is a spare drive, Spare Drive is displayed.
  • If it is a free drive, Free Drive is displayed.

CR#

C# and R# (2-digit hexadecimal numbers), which identify the PDEV

Output in the format of "XX/YY"

XX: C#

YY: R#

Device Type-Code

Drive type code of this drive

Output example: SLR5A-M800SS

Used Endurance Indicator (%)

The current used endurance of SSD life (0 to 100)

The value of this indicator increases due to drive operation associated with internal processing of the storage system, and the host I/O. Even when no data is copied due to a drive failure, the value of this indicator increases because the spare drive also performs internal processing.

History1 (date)

Date on which the used endurance of SSD life was acquired (1 month ago)

Output example: yyyy/mm/dd

History1 (%)

The used endurance of SSD life (0 to 100)(1 month ago)

History2 (date)

Date on which the used endurance of SSD life was acquired (2 months ago)

Output example: yyyy/mm/dd

History2 (%)

The used endurance of SSD life (0 to 100) (2 months ago)

History3 (%) ... History 119 (%)

Life (0 to 100) (3 months ago ...119 months ago)

History120 (date)

Date on which the used endurance of SSD life was acquired (120 months ago)

Output example: yyyy/mm/dd

History120 (%)

The used endurance of SSD life (0 to 100) (120 months ago)

ModePerLpr.csv

This CSV file contains information about system option modes. A record is created for each system option mode.

Item

Content

System Option Mode#

System option mode # (0 to 2047, decimal number)

LPR#0, LPR#1, …, LPR#31

System option mode for LPR#0 to LPR#31

  • If the system option mode is on:

    On

  • If the system option mode is not on:

    Blank

MpPathStatus.csv

This CSV file contains information about the status of logical paths. A record is created for each MP blade or LR.

Item Content
MPU#/CTL# MP unit number or CTL number (2-digit hexadecimal number)
  • For MP unit number: MPU#00 to MPU#01
  • For CTL number: CTL#00 to CTL#01
CMG#00-00 to 01

CMG#01-00 to 01

Path status* for the MP unit number with the cache module

(CMG#XX-YY) XX: I path, YY: CMG#

MPU#00-00 to 01

MPU#01-00 to 01

Path status* and the MP unit for the MP unit number

(MPU#XX-YY) XX: I path, YY: MPU#

CMG#00-00 to 01

CMG#01-00 to 01

Path status* with the cache module for the CTL number

(CMG#XX-YY) XX: I path, YY: CMG#

MPU#00-00 to 01

MPU#01-00 to 01

Path status* with the MP unit number for the CTL number

(MPU#XX-YY) XX: I path, YY: MPU#

* Path status: 1=Normal, 0=Abnormal

MpPcbStatus.csv

This CSV file contains information about the status of MP Unit. A record is created for each MP unit.

Item Content
MPU ID MP unit ID (MPU-10, MPU-20)
Auto Assignment Information about whether this MP unit is set to be automatically assigned to each resource.
  • Enabled: Set to be automatically assigned
  • Disabled: Not set to be automatically assigned
MPU Status MP unit status:
  • 1=Normal
  • 0=Abnormal
MP#00, #01, …, #13 MP status
  • 1=Normal
  • 0=Abnormal

The number of output items depends on the number of installed MPs:

  • VSP E590: MP#00,01,…,0b
  • VSP E790: MP#00,01,…,1f
  • VSP E990: MP#00,01,…,1b
  • VSP E1090: MP#00,01,…,1f

PcbRevInfo.csv

This CSV file contains information about revisions of packages such as channel boards (CHBs) and others. A record is created for each package.

Item

Content

Cluster#

Cluster number 1 or 2

Location

Part name

FRU number

Product name of the package or some other name

PK Revision

Revision of the package

Factory

Factory manufacturing the package

Number

Serial number of the package

MAC Address

MAC address of the package

This item always remains blank.

PdevCapaInfo.csv

This CSV file contains information about physical device (PDEV) capacities. A record is created for each of the classifications shown in "PDEV Kind".

Item

Content

PDEV Kind

The following four classifications are output:

  • OPEN System (TB)
  • Total Capacity (TB)
  • Number of PDEVs

HDD Drive

HDD drive capacity (TB)

Spare Drive

Spare drive capacity (TB)

SSD Drive

SSD capacity (TB)

Free Drive

Free drive capacity (TB)

PdevInfo.csv

This CSV file contains information about physical devices (PDEVs). A record is created for each PDEV.

Item Content
ECC Group Number of parity group of which this PDEV is a component:
  • Spare Drive: For spare drives
  • Free Drive: For free drives
Emulation Type Emulation type for the parity group indicated by "ECC Group"

This item is blank when the ECC Group is Spare Drive.

CR# C# and R# (2-digit hexadecimal numbers that identify the PDEV)

Output in the format XX/YY, where:

  • XX: C#
  • YY: R#
PDEV Location PDEV location name
Device Type Drive type (for example, SAS, SSD)
RPM Revolutions per minute (unit: rpm)

This item is blank when the drive type is not HDD.

InterfaceDrive control interface (for example, NVMe, SAS)
Device Type-Code Device type code of this drive (for example, DKR5D-J600SS)
Device Size Drive size (inches) (for example, 2.5, 3.5)

This item is blank when the drive type is FMD.

Device Capacity Drive capacity (GB or TB)
Drive Version Drive firmware version
DKB1 Name of the DKB1 controlling the PDEV
DKB2 Name of the DKB2 controlling the PDEV
DKB3Name of the DKB3 controlling the PDEV

This item is output only for VSP E990 and VSP E1090.

DKB4Name of the DKB4 controlling the PDEV

This item is output only for VSP E990 and VSP E1090.

Serial Number # Serial number of this drive
RAID Level RAID level of the parity group indicated by "ECC Group"

This item is blank when the "ECC Group" is Spare Drive or Free Drive

RAID Concatenation #0 Number of parity group to be concatenated to parity group (#0) identified by "ECC Group"

This item is blank when the parity group is not concatenated to another parity group or is Spare Drive.

RAID Concatenation #1 Number of parity group to be concatenated to parity group (#1) identified by "ECC Group"

This item is blank when the parity group is not concatenated to another parity group or is Spare Drive.

RAID Concatenation #2 Number of parity group to be concatenated to parity group (#2) identified by "ECC Group"

This item is blank when the parity group is not concatenated to another parity group or is Spare Drive.

Resource Group ID (ECC Group) Resource group ID of parity group (decimal number)
Resource Group Name (ECC Group)

Resource group name of parity group

Encryption Encryption status of the parity group to which the PDEV belongs:
  • Enabled: Encryption is enabled.
  • Disabled: Encryption is disabled.
Accelerated Compression

Displayed only for VSP G130, G/F350, G/F370, G/F700, G/F900.

Automatically manage compressed space of FMD parity groupIndicates whether to manage the compressed area of the FMD parity group automatically.
  • Enabled: The area is managed automatically.
  • Disabled: The area is not managed automatically

This item is blank when the parity group to which the PDEV belongs does not support accelerated compression.

PdevStatus.csv

This CSV file contains information about the status of physical devices (PDEVs). A record is created for each PDEV.

Item

Content

CR#

C# and R# (2-digit hexadecimal numbers), which identify the PDEV

Output in the format XX/YY, where:

  • XX: C#
  • YY: R#

Pdev Status

PDEV status1

Port0 Status

Status of Port 0 on this PDEV1

Port1 Status

Status of Port 1 on this PDEV1

Pdev Location

Location name of this PDEV

Notes:

  1. 1=Normal, 0=Abnormal

PECBInfo.csv

This CSV file contains information about the PECB (PCIe channel board) and connecting destination.

For VSP E590 and VSP E790, a hyphen (-) is output for all items.

Item Content
Location PECB location name
Status Whether the PECB is installed
  • Installed
  • Not Installed
Type Destination module type of the PECB
  • CHBB
Expansion mode Expansion mode set in the destination module of the PECB

PkInfo.csv

This CSV file contains information about channel boards (CHBs). A record is created for each CHB.

Item

Content

CHB Location

CHB name

Port#

Number of the port installed on the CHB (2-digit hexadecimal number), 00 to ff

Port

Name of port installed on the CHB

Package Type

CHB type indicated on the CHB Location

Output examples for FC: 16FC2 (CHB), 32FC4R (CHB)

Output examples for iSCSI: 10iSCSI2o (CHB), 10iSCSI2c (CHB)

SFP Kind

Type of SFP (Small Form factor Pluggable):

  • Short Wave
  • Long Wave
  • Blank: The CHB type is iSCSI.

SFP Status

SFP Status:

  • Normal
  • Failed
  • Not Fix
  • Blank: The CHB type is iSCSI.

Fabric

Fibre topology settings indicating the setting status of the Fabric switch:

  • On
  • Off
  • Blank: The CHB type is iSCSI.

Connection

Fibre topology settings:

  • Point to Point
  • FC-AL
  • Blank: The CHB type is iSCSI.

Port Address

Port address (00 to ff, 2-digit hexadecimal number)

This item is blank when the CHB type is iSCSI.

Resource Group ID (Port)

Resource group ID of port (0 to 1023, decimal number)

Resource Group Name (Port)

Resource group name of the port

Port Internal WWN

Port WWN

This item is blank when the CHB type is iSCSI.

T10 PI Mode

Indicates whether the T10 PI mode can be applied to the port:

  • Enabled
  • Disabled
  • Blank: The CHB does not support T10 PI mode.

SFP Data Transfer Rate

Maximum transfer rate of SFP which the mounted package supports, for example, 10G, 32G.

This item is blank when the CHB type is iSCSI.

ModeOperation mode of the Fibre Channel port
  • SCSI: SCSI port
  • NVMe: NVMe port
  • - (hyphen): The port is not a Fibre Channel port.

This item is displayed only for VSP E1090.

PpInfo.csv

This CSV file contains information about the software. A record is created for each software product.

For details about the license key, see Managing license keys.

Item

Content

Program Product Name

Software name

Install

Information about whether the installed license key is enabled:

  • Enabled: Installed and the software can be used.
  • Disabled: Installed but the software cannot be used.

Key Type

Installed license key type:

  • Permanent
  • Temporary
  • Emergency
  • Term
  • Not Installed: No license key is installed.

Permitted Volumes(TB)

Permitted volume capacity for this software (in TB). (The used volume capacity is not output.)

If no upper limit value is set for the capacity, "Unlimited" is output.

This item is blank in either of the following cases:

  • A new license key whose "Key Type" is Temporary or Emergency has been installed.
  • No license key has been installed.

Expiration Date

Expiration date of the software

The format is mm/dd/yyyy (month/day/year).

This item is blank in either of the following cases:

  • The effective term of the license key is unlimited.
  • No license key has been installed.

Status

License key status of the software:

  • Installed
  • Not Enough License
  • Grace Period
  • Expired
  • Not Installed
  • Installed (Disabled)

SMfundat.csv

This CSV file contains information about SM functions. A record is created for each of the classifications shown in "SM Install Function".

Item Content
SM Install function The following classifications are output:
  1. Base
  2. Extension1
  3. Extension2
  4. Extension3
  5. Extension4
Availability Information about whether the function of "SM Install function" is enabled
  • Enabled
  • Disabled

SsdDriveInfo.csv

This CSV file contains information about SSDs. A record is created for each drive.

Item Content
ECC Group Number of the parity group to which this SSD belongs
  • Spare Drive: The SSD is a spare drive.
  • Free Drive: The SSD is a free drive.
CR# C# and R# (2-digit hexadecimal numbers that identify the PDEV)

Output in the format XX/YY, where:

  • XX: C#
  • YY: R#
PDEV Location

Drive type code of the PDEV location name for this drive

Device Type-Code Drive type code

Output example: SLR5A-M800SS

Device Capacity Drive capacity in GB or TB
SSD Device Type SSD drive type (for example, SSD(RI), MLC, FMD)
Used Endurance Indicator (%) Used endurance of SSD life (0 to 100)
Used Endurance Indicator Threshold (%) Drive life threshold (0 to 100)
Used Endurance Indicator Warning SIM (%) Warning SIM threshold (0 to 100)
FMD Battery Life Indicator Warning SIM (%)Displayed only for VSP G130, G/F350, G/F370, G/F700, G/F900.

Threshold of battery life warning SIM (0 to 100)

This item is blank if the SSD is other than FMD.

FMD Battery Life Indicator (%)Displayed only for VSP G130, G/F350, G/F370, G/F700, G/F900.

Used battery life (0 to 100)

This item is blank if the SSD is other than FMD.

SsidInfo.csv

This CSV file contains information about SSIDs. A record is created for each SSID.

Item

Content

DEV# Start

First LDEV number for the SSID

DEV# End

Last LDEV number for the SSID

SSID

Subsystem ID (hexadecimal)

SysoptInfo.csv

This CSV file contains information about system options.

Item

Content

Spare Disk Recover

Speed of copying data to the spare drive.

  • Interleave mode
  • Full Speed mode

Dynamic Sparing

Information about whether to perform automatic copy to a spare drive if the occurrences of drive failures exceed the threshold.

  • On
  • Off

Correction Copy

Information about whether to perform correction copy to a spare drive if a drive is blocked.

  • On
  • Off

Disk Copy pace

Speed of copying the spare drive in the Interleave mode.

  • Faster
  • Medium
  • Slower

System Option On

System options that are set to ON.

Output example: modeXXXX (0 to 2047, decimal number)

Link Failure Threshold

Threshold to notify the link failure (0 to 255, decimal)

WwnInfo.csv

This CSV file contains information about hosts. A record is created for each host.

Item

Content

Port

Port name.

Host Group

Host group name

iSCSI target alias is output if the "Package Type" is iSCSI.

Host Mode

Host mode that is set for the host group (hexadecimal)

Host Mode Option

Host mode option that is set for the host group (decimal)

Multiple options are separated by semicolons (;).

This item is blank when no host mode options have been specified.

WWN

World Wide Name of the host bus adapter registered to the host group (hexadecimal number)

This item is blank when no valid WWN has been specified.

Nickname

Nickname of the host

This item is blank when no nickname has been specified.

Host Group#

Host group number (00 to fe, hexadecimal number)

The iSCSI target ID is output when the "Package Type" is iSCSI.

CHB Location

Name of port installed on the CHB

Package Type

CHB type indicated on the CHB Location

Output example for FC: 16FC2 (CHB), 32FC4R(CHB)

Output example for iSCSI: 10iSCSI2o (CHB), 10iSCSI2c (CHB)

T10 PI Mode

Indicates whether the T10 PI mode can be applied to the port:

  • Enabled
  • Disabled
  • Blank: "Package Type" does not support T10 PI mode.