Audit logs quick reference

ACM

Audit log functions used for account management

AuditLog

Audit log functions used during audit logging

BASE

Audit log functions used during initial setup

Information

Audit log functions used during log related operations on Maintenance PC

Install

Audit log functions used during software or firmware installation

Local Replications

Audit Log functions used during local replication operations

Maintenance

Audit log functions used during general maintenance

Monitor

Audit log functions used to monitor process

PFM

Audit log functions used to monitor performance

PROV

Audit log functions used to provision the system

Remote Maintenance

Audit log functions used for Remote Maintenance application

Remote Replications

Audit log functions used during remote replication operations

SPM

Audit log functions used during Server Priority Manager operations

UVM

Audit log functions used during Universal Volume Manager operations

VM

Audit log functions used during Volume Migration operations

VPM

Audit log functions used during Virtual Partition Manager operations

VS

Audit log functions used during volume shredding operations

AuditLog

Send Test Message

Sending a test log to a Syslog server on the Audit Log Settings window

AuditLog

Set Up Syslog Serv

Configuring syslog servers in the Set Up Syslog Server for Audit Logs window

ACM

AddUsersToUserGroup

Adding users to a user group

ACM

CreateUser

Creating a new user account

ACM

CreateUserGroup

Creating a new user group

ACM

DeleteUsers

Deleting user accounts

ACM

DeleteUserGroups

Deleting user groups

ACM

DisableUsers

Disabling users

ACM

EnableUsers

Enabling users

ACM

RemoveUsersFromUserGroup

Removing users from a user group

ACM

Set Login Message

Setting login message

ACM

UpdatePassword

Changing a password

ACM

UpdateUserAuthentication

Changing a user authentication mode

ACM

UpdateUserGroupAllResourceGrp

Changing assignment of all resource groups of a user group

ACM

UpdateUserGroupName

Changing a user group name

ACM

UpdateUserGroupResourceGrpBmp

Changing assignment of resource groups of a user group

ACM

UpdateUserGroupRole

Assigning roles to a user group or releasing assignment of roles

BASE

Advanced Settings

Editing advanced system settings

BASE

Automatic LDAP Password change

Changing, through the REST API, the user ID and password that are used for search or the password only

BASE

Create Conf Report

Creating configuration reports

BASE

Delete CVAE Info

Changing information from Hitachi Command Suite

BASE

Delete Reports

Deleting configuration reports

BASE

Delete Tasks

Deleting tasks

BASE

Disable Auto Delete

Disabling Task Auto Delete

BASE

Edit Storage System

Editing storage system information

BASE

Enable Auto Delete

Enabling Task Auto Delete

BASE

Entry Tasks

Registering tasks to the storage system

BASE

HCSSO Authentication

Launching Device Manager - Storage Navigator from Hitachi Command Suite

BASE

HCSSO SetOneTimeKey

Issuing OneTimeKey from Hitachi Command Suite

BASE

Login

Logging in to Device Manager - Storage Navigator or Maintenance PC

BASE

Logout

Logging out from Device Manager - Storage Navigator or Maintenance PC

BASE

Resume Tasks

Resuming tasks

BASE

Set CVAE Info

Changing information from Hitachi Command Suite

BASE

Start Maintenance

Logging in to Maintenance PC

BASE

Suspend Tasks

Suspending tasks

BASE

Unlock Forcibly

Forcible unlocking

Information

Delete Log

Log-related operations on Maintenance PC

Information

ORM Value

Log-related operations on Maintenance PC

Information

Threshold Value

Log-related operations on Maintenance PC

Install

All Config

Maintenance on Maintenance PC

Install

Backup Config

Maintenance on Maintenance PC

Install

FlashDrive ORM Value

Maintenance on Maintenance PC

Install

Initialize ORM Value

Maintenance on Maintenance PC

Install

Machine Install Date

Maintenance on Maintenance PC

Install

NEW Installation

Maintenance on Maintenance PC

Install

System Option

Maintenance on Maintenance PC

Install

System Tuning

Maintenance on Maintenance PC

Local Replication

Assign S-VOLs

Assigning secondary volumes of Thin Image pairs

Local Replication

Create Pairs

Creating pairs of ShadowImage or Thin Image

Local Replication

Delete Pairs

Deleting pairs of ShadowImage or Thin Image

Local Replication

Edit Options

Setting options for ShadowImage

Local Replication

Initialize

Initializing pairs of ShadowImage or Thin Image

Local Replication

Remove S-VOLs

Removing secondary volumes of Thin Image pairs

Local Replication

Resync Pairs

Resynchronizing pairs of ShadowImage or Thin Image

Local Replication

Split Pairs

Splitting pairs of ShadowImage or Thin Image

Local Replication

Suspend Pairs

Suspending ShadowImage pairs

Maintenance

Block

Maintenance from the Maintenance Utility menu

Maintenance

Block(Remove)

Maintenance from the Maintenance Utility menu

Maintenance

Block(Type Change)

Maintenance from the Maintenance Utility menu

Maintenance

Blockade

Maintenance on Maintenance PC

Maintenance

Boot System SafeMode

Maintenance from the Maintenance Utility menu

Maintenance

Change SFP Type

Maintenance from the Maintenance Utility menu

Maintenance

Check Remove

Maintenance from the Maintenance Utility menu

Maintenance

Correction Copy

Maintenance on Maintenance PC

Maintenance

Create User

Maintenance from the Maintenance Utility menu

Maintenance

Create User Group

Maintenance using the Maintenance Utility applications (GUM AP) such as NAS Manager

Maintenance

Delete Users

Maintenance from the Maintenance Utility menu

Maintenance

Delete User Group

Maintenance using the Maintenance Utility applications (GUM AP) such as NAS Manager

Maintenance

Disable Licenses

Maintenance from the Maintenance Utility menu

Maintenance

Edit Hypervisor Mode

Maintenance from the Maintenance Utility menu

Maintenance

Edit Login Message

Maintenance from the Maintenance Utility menu

Maintenance

Edit ReplacingNotice

Maintenance from the Maintenance Utility menu

Maintenance

Edit System Param

Maintenance from the Maintenance Utility menu

Maintenance

Edit UPS Mode

Maintenance from the Maintenance Utility menu

Maintenance

Edit User

Maintenance from the Maintenance Utility menu

Maintenance

Edit User Group

Maintenance using the Maintenance Utility applications (GUM AP) such as NAS Manager

Maintenance

Enable Licenses

Maintenance from the Maintenance Utility menu

Maintenance

Force Rls SysLock

Maintenance from the Maintenance Utility menu

Maintenance

Install

Maintenance from the Maintenance Utility menu

Maintenance

Install NAS Firm

Maintenance from the Maintenance Utility menu

Maintenance

License Key Install

Maintenance from the Maintenance Utility menu

Maintenance

License Key Remove

Maintenance from the Maintenance Utility menu

Maintenance

MP Restore

Maintenance on Maintenance PC

Maintenance

Power Off Storage

Maintenance from the Maintenance Utility menu

Maintenance

Power On Storage

Maintenance from the Maintenance Utility menu

Maintenance

Reboot GUM

Maintenance from the Maintenance Utility menu

Maintenance

Remove

Maintenance from the Maintenance Utility menu

Maintenance

Remove NAS Firm

Maintenance from the Maintenance Utility menu

Maintenance

Reset DurationOfUse

Maintenance from the Maintenance Utility menu

Maintenance

Reset HUB

Maintenance from the Maintenance Utility menu

Maintenance

Reset Hypervisor

Maintenance from the Maintenance Utility menu

Maintenance

Reset Hypervisor NW

Maintenance from the Maintenance Utility menu

Maintenance

Reset NASFW

Maintenance from the Maintenance Utility menu

Maintenance

Restore

Maintenance from the Maintenance Utility menu or maintenance on Maintenance PC

Maintenance

Restore(Remoeve)

Maintenance from the Maintenance Utility menu or maintenance on Maintenance PC

Maintenance

Restore(Type Change)

Maintenance from the Maintenance Utility menu

Maintenance

Restore Data

Maintenance on Maintenance PC

Maintenance

Select Cipher Suite

Maintenance from the Maintenance Utility menu

Maintenance

Select Login Window

Maintenance from the Maintenance Utility menu

Maintenance

Set Up Alert

Maintenance from the Maintenance Utility menu

Maintenance

Set Up Date & Time

Maintenance from the Maintenance Utility menu

Maintenance

Set Up Email

Maintenance using the Maintenance Utility applications (GUM AP) such as NAS Manager

Maintenance

Set Up Network Perm

Maintenance from the Maintenance Utility menu

Maintenance

Set Up Network Set

Maintenance from the Maintenance Utility menu

Maintenance

Set Up SNMP

Maintenance using the Maintenance Utility applications (GUM AP) such as NAS Manager

Maintenance

Set Up Syslog

Maintenance using the Maintenance Utility applications (GUM AP) such as NAS Manager

Maintenance

Set Up System Info

Maintenance from the Maintenance Utility menu

Maintenance

Stop Copy

Maintenance from the Maintenance Utility menu

Maintenance

Turn Off Locate LEDs

Maintenance from the Maintenance Utility menu

Maintenance

Turn On Locate LEDs

Maintenance from the Maintenance Utility menu

Maintenance

Update Cert Files

Maintenance from the Maintenance Utility menu

Maintenance

Update Firmware

Maintenance from the Maintenance Utility menu

Maintenance

UserAccount Backup

Maintenance from the Maintenance Utility menu

Maintenance

UserAccount Restore

Maintenance from the Maintenance Utility menu

PFM

Delete Unused WWNs

Performance Monitor

PFM

Edit CU Monitor Mode

Performance Monitor

PFM

Edit Monitoring SW

Performance Monitor

PFM

Edit WWN

Performance Monitor

PFM

Edit WWN MonitorMode

Performance Monitor

PROV

Add Hosts

• Adding hosts to specified host groups
• Adding specified hosts to host groups

PROV

Add LUN Paths

• Mapping LU paths
• Creating alternate LUN paths
• Setting the same path as a selected LUN

PROV

Assign MP Unit

Assigning MP units

PROV

Block LDEVs

Blocking LDEVs

PROV

CalculateTieringMonitorData

Recalculating tier monitoring data from Hitachi Command Suite

PROV

Create Host Groups

Creating host groups

PROV

Create LDEVs

Creating new LDEVs

PROV

Create Resource Grps

Creating resource groups

PROV

Create VDKC-Box

Creating a VDKC-Box from Hitachi Command Suite

PROV

Create/Expand Pools

• Creating new pools
• Increasing pool capacity

PROV

CreateAlus

Creating an LDEV with the ALU attribute

PROV

CreateiScsiName

Adding hosts to selected iSCSI targets

PROV

CreateiScsiPath

• Adding iSCSI paths to external storage systems
• Adding connections to remote storage systems

PROV

CreateiScsiTarget

Creating iSCSI targets

PROV

CreateLdev

Creating new internal or external volumes

PROV

CreateParityGroups

Creating parity groups

PROV

CreateRemoteChapUser

Adding CHAP users to selected iSCSI targets

PROV

CreateSlus

Creating an LDEV with the SLU attribute from Hitachi Command Suite

PROV

CreateThinProvisioningVolumes

Creating a Dynamic Provisioning virtual volume from Hitachi Command Suite

PROV

CreateTiPairsWithSlu

Creating Thin Image pairs using LDEVs with the SLU attribute from Hitachi Command Suite

PROV

CreateTiVolumes

Creating a secondary volume for Thin Image from Hitachi Command Suite

PROV

Delete Host Groups

Deleting host groups

PROV

Delete LDEVs

Deleting LDEVs

PROV

Delete Login WWNs

Deleting unnecessary WWNs

PROV

Delete LUN Paths

Removing LUN paths from LDEVs

PROV

Delete Resource Grps

Deleting resource groups

PROV

Delete VDKC-Box

Deleting a VDKC-Box from Hitachi Command Suite

PROV

DeleteAlus

Deleting an LDEV with the ALU attribute

PROV

DeleteiScsiInitiatorUser

Deleting the setting information of users with CHAP authentication on ports

PROV

DeleteiScsiName

Removing hosts from selected iSCSI targets

PROV

DeleteiScsiPath

• Deleting iSCSI paths to external storage systems
• Deleting iSCSI paths when connections cannot be added to remote storage systems

PROV

DeleteiScsiTarget

Deleting iSCSI targets

PROV

DeleteLdev

Deleting internal or external volumes

PROV

DeleteLoginiScsiName

Deleting unnecessary iSCSI names

PROV

DeleteParityGroups

Deleting parity groups

PROV

DeleteRemoteChapUser

Removing CHAP users from selected iSCSI targets

PROV

DeleteSlus

Deleting an LDEV with the SLU attribute from Hitachi Command Suite

PROV

DeleteTargetChapUser

Removing CHAP users assigned to iSCSI targets

PROV

DeleteTiVolumes

Deleting a secondary volume for Thin Image from Hitachi Command Suite

PROV

DRU Expiration Lock

Data Retention Utility

PROV

Edit Cmd Dev(Auth)

Editing command device settings

PROV

Edit Cmd Dev(DevGrp)

Editing command device settings

PROV

Edit Cmd Dev(Sec)

Editing command device settings

PROV

Edit Command Devices

Editing command device settings

PROV

Edit DRU Attribute

Data Retention Utility

PROV

Edit Full Allocation

Enabling or disabling the Full Allocation setting

PROV

Edit Host

Editing host settings

PROV

Edit Host Grps(Mode)

Editing host group settings

PROV

Edit Host Grps(Name)

Editing host group settings

PROV

Edit LDEVs(tier)

Editing LDEV settings

PROV

Edit External LDEV Tier Rank

Editing the external LDEV tier ranks of pool volumes assigned to a pool

PROV

Edit MP Units

Editing MP unit settings

PROV

Edit Ports(Address)

Editing port settings

PROV

Edit Ports(Security)

Editing port settings

PROV

Edit Ports(Speed)

Editing port settings

PROV

Edit Ports(Topology)

Editing port settings

PROV

Edit Resource Grp

Editing resource groups

PROV

Edit Tiering Policy

Editing the tiering policy

PROV

Edit V-VOL Option

• Creating new LDEVs
• Editing LDEV settings

PROV

Edit/Delete Pools

• Deleting pools
• Editing pool settings

PROV

Edit/Delete UUIDs

• Changing UUIDs
• Deleting UUIDs

PROV

EditiScsiInitiatorUser

Editing the setting information of users with CHAP authentication on ports

PROV

EditiScsiName

Editing host settings

PROV

EditiScsiNickName

Editing host settings

PROV

EditiScsiTarget

Editing iSCSI target settings

PROV

EditiSNS

Editing port settings

PROV

EditPortInfo

Editing port settings

PROV

EditRemoteChapUser

Editing CHAP user settings

PROV

EditRemoteTargetUser

Editing iSCSI targets

PROV

EditT10piMode

Editing T10 PI mode settings on ports

PROV

EditTargetChapUser

Editing settings of CHAP users assigned to iSCSI targets

PROV

ExecBindingOperation

Binding or unbinding an LDEV with the SLU attribute to or from the LDEV with the ALU attribute

PROV

Expand V-VOLs

Increasing virtual volume capacity

PROV

ExpandSlus

Increasing capacity of an LDEV with the SLU attribute from Hitachi Command Suite

PROV

Format LDEVs

• Formatting LDEVs
• Creating new LDEVs

PROV

Format LDEVs(Q)

• Quick formatting LDEVs
• Creating new LDEVs

PROV

Initialize Pools

Initializing pools

PROV

LDEV Name

• Creating new LDEVs
• Editing LDEVs

PROV

LdevForceRestore

Forcible restoration of LDEVs

PROV

MapSecondaryVolumeWithSlu

Mapping LDEVs with the SLU attribute to the secondary volumes of Thin Image pairs from Hitachi Command Suite

PROV

Monitor Pools

Starting the performance monitoring of a pool

PROV

Move Resources

• Adding resources to resource groups
• Removing resources from resource groups

PROV

OperateSiPairsWithSlu

Operating ShadowImage pairs using LDEVs with the SLU attribute from Hitachi Command Suite

PROV

OperateTiPairsWithSlu

Operating Thin Image pairs using LDEVs with the SLU attribute from Hitachi Command Suite

PROV

Pool Name

• Setting pool names
• Deleting pool names

PROV

Reclaim Zero Pages

Releasing pages in virtual volumes

PROV

Release HostReserved

Releasing Host-Reserved LUNs

PROV

Relocate Pool

Starting the tier relocation of a pool

PROV

Remove Hosts

Removing hosts from host groups

PROV

Restore LDEVs

Restoring LDEVs

PROV

Restore Pools

Restoring pools

PROV

RevertTiPairsWithSlu

Reverting Thin Image pairs using LDEVs with the SLU attribute from Hitachi Command Suite

PROV

Set PageTieringLevel

Setting the tiering policy per page

PROV

Set Virtual LDEV

• Editing virtualization management settings
• Setting or releasing the GAD reserve attribute on a volume for the secondary volume of a global-active device pair

PROV

Shrink Pool

Decreasing pool capacity

PROV

StartParityGroupsFormat

Formatting parity groups

PROV

StartVerify

Verifying LDEVs

PROV

Stop Monitoring

Stopping the performance monitoring of a pool

PROV

Stop Reclm ZeroPages

Stopping releasing pages in virtual volumes

PROV

Stop Relocating

Stopping the tier relocation of a pool

PROV

Stop Shrinking Pool

Stopping decreasing pool capacity

PROV

StopFormat

Stopping formatting parity groups

PROV

StopVerify

Stopping verifying LDEVs

PROV

UnmapSecondaryVolumeWithSlu

Unmapping the secondary volumes of Thin Image pairs using LDEVs with the SLU attribute from Hitachi Command Suite

PROV

UpdateAluaMode

• Editing an LDEV
• Creating pairs for global-active device
• Resynchronizing pairs for TrueCopy, Universal Replicator, and global-active device
• Resynchronizing pairs for global-active device by the consistency group

PROV

UpdateAsymmetricAccessStatePerHG

Editing Asymmetric Access States settings

PROV

UpdateCopybackMode

Enabling or disabling copy-back mode

PROV

UpdateParityGroupSettings

Enabling or disabling accelerated compression

PROV

UpdateSpareDrives

Assigning as a spare drive or releasing a spare drive setting

Remote Replication

Add Path

Adding paths to remote storage systems

Remote Replication

Add Quorum Disk ID

Adding quorum disk IDs used by global-active device

Remote Replication

Add RCU

Adding connections to remote storage systems

Remote Replication

Change JNL Option

Changing the journal option for Universal Replicator

Remote Replication

Change Mirror Option

Changing the mirror option for Universal Replicator

Remote Replication

Change RCU Option

Changing the remote storage system options

Remote Replication

Create Pairs

Creating pairs of TrueCopy, Universal Replicator, and global-active device

Remote Replication

Delete Pairs

Deleting pairs of TrueCopy, Universal Replicator, and global-active device

Remote Replication

Delete Path

Removing paths from remote storage systems

Remote Replication

Del Quorum Disk ID

Deleting quorum disk IDs used by global-active device

Remote Replication

Delete RCU

Removing connections to remote storage systems

Remote Replication

Edit Options

Setting the remote replica options

Remote Replication

Edit Pair Options

Setting the pair options for TrueCopy or Universal Replicator

Remote Replication

Journal Owner

Setting the journal ownership for Universal Replicator

Remote Replication

Journal Vol

Creating or deleting journals or assigning journal volumes of Universal Replicator

Remote Replication

R-Cmd.Dev.

Setting remote command devices of Universal Replicator

Remote Replication

Resync Pairs

Resynchronizing pairs of TrueCopy, Universal Replicator, and global-active device

Remote Replication

Split Pairs

Splitting pairs of TrueCopy or Universal Replicator

Remote Replication

Suspend Pairs

Suspending pairs for global-active device

Remote Replication

UpdateQuorumDisks

Editing the value of Read Response Guaranteed Time When Quorum monitoring has stopped for global-active device.

SPM

Change SPMGrp

Server Priority Manager

SPM

Clear SPM Info

Server Priority Manager

SPM

Default Set

Server Priority Manager

SPM

Set All Prio Port

Server Priority Manager

SPM

Set All Prio WWN

Server Priority Manager

SPM

Set Ctrl Kind

Server Priority Manager

SPM

Set Prio Port

Server Priority Manager

SPM

Set Prio WWN

Server Priority Manager

SPM

SPMGrp Del/Chg

Server Priority Manager

SPM

Update Port WWN

Server Priority Manager

SPM

Update SPMGrp

Server Priority Manager

SPM

Update WWN

Server Priority Manager

UVM

Add External Volumes

Mapping external volumes

UVM

Assign MP Unit

Assigning MP units for external volumes

UVM

Delete ES VOLs

Releasing external volume mapping

UVM

Disconnect ES Paths

Disconnecting external paths

UVM

Disconnect ES VOLs

• Disconnecting external storage systems
• Disconnecting external volumes

UVM

Edit ES Path Config

• Adding paths to external path groups
• Deleting paths from external path groups
• Changing priority among external paths

UVM

Edit ES VOLs

Editing external volume settings

UVM

Edit External WWNs / iSCSI Targets

• Editing external WWN parameters
• Editing external iSCSI target parameters

UVM

Reconnect ES Paths

Reconnecting external paths

UVM

Reconnect ES VOLs

• Reconnecting external storage systems
• Reconnecting external volumes

VM

Del Migration Plans

Volume Migration

VM

Migrate Volumes

Volume Migration

VPM

Edit CLPR

Creating, adding, deleting, or editing CLPR

Migrating parity groups to a different CLPR

VS

Abort Shredding

Stopping shredding LDEVs

VS

End Shredding

Ending shredding LDEVs

VS

Shred LDEVs

Shredding LDEVs

ENC

Add keys to DKC

• Creating encryption keys
• Configuring encryption environment settings

Backup Keys

Backing up encryption keys on the key management server or backing up encryption keys as a file on the management client

Backup Keys to File

Backing up encryption keys as a file on the management client

Backup Keys to Serv

Backing up encryption keys on the key management server

Backup Keys to Serv(Auto)

Automated backing up encryption keys on the key management server

Create KEK Dynamic

• Configuring encryption environment settings
• Updating key encryption keys

Create Keys

• Creating encryption keys
• Configuring encryption environment settings

Create Keys On Serv

• Creating encryption keys
• Backing up encryption keys on the key management server
• Configuring encryption environment settings

DEK assign SpareDisk

Configuring encryption environment settings

DEK delete

Configuring encryption environment settings

Delete and Create Keys

• Deleting unused encryption keys
• Creating unused encryption keys

Delete KEK Dynamic

• Configuring encryption environment settings
• Updating key encryption keys

Delete Keys

Deleting encryption keys

Delete Keys on Serv

Deleting encryption keys backed up on the key management server

Delete Keys on Serv(Auto)

Deleting encryption keys backed up automatically on the key management server

Disable Enhancement Of Encryption

Disabling the settings used in the enhancement of encryption

Edit Encryption

Enabling/disabling the encryption in a parity group level

Edit ENC Settings

Configuring encryption environment settings

Edit Password Policy

Editing password policies for backing up encryption keys

Register KEK Dynamic

• Configuring encryption environment settings
• Updating key encryption keys

Regular Backup Keys to Serv

Backing up encryption keys on the key management server

Regular Delete Keys on Serv

Request reception of deletion of the encryption key of the key management server

Rekey CEK

• Configuring encryption environment settings
• Updating certificate encryption keys

Rekey KEK Dynamic

• Updating key encryption keys
• Configuring encryption environment settings

Restore Keys

Restoring encryption keys from back up copies on the key management server or the management client

Restore Keys fr File

Restoring encryption keys from back up copies on the management client

Restore Keys fr File(Forcibly)

Restoring encryption keys forcibly from back up copies on the management client

Restore Keys fr Serv

Restoring encryption keys from back up copies on the key management server

Restore Keys fr Serv(Forcibly)

Restoring encryption keys forcibly from back up copies on the key management server

Retry KEK Dynamic

Reacquisition of key encryption keys

Set Up Key Mng Serv

Configuring encryption environment settings

Succeeded Backup to Serv

Setting of succeeded backup flag

KEK Acquisition

Acquisition Key

Reacquisition of key encryption keys

Set Key

Key Recovery

Restore Keys fr Serv(Boot)

Restoration of encryption keys

Set Key Blob

ENC

Backup Keys

When the encryption key is manually backed up as a file.

Change CEK Status

• When the encryption environment is configured from the initial setting.
• When the certificate encryption key is updated.
• When the encryption disk board is deleted or replaced.

Change DEK Status

• When the encryption environment is configured from the initial setting.
• When the encryption environment setting is initialized.
• When the data encryption is enabled/disabled.
• When Dynamic sparing, Correction copy or Copy back is performed.
• When the drive (Hard disk drive, SSD or FMD) is added, deleted or replaced after the encryption environmental setting is configured.

Clear Keys

When the encryption environment setting is initialized.

Create Keys

When the encryption key is created.

Create Keys on DKC

• When the encryption environment is configured.
• When the unused encryption key is created.

Delete CEK

When the encryption environment setting is initialized.

Delete DEK

When the encryption environment setting is initialized.

Delete Keys

When the encryption key is deleted.

Delete Spedified Key

When the unused encryption key is deleted.

Restore Keys

When the encryption key is restored.

Set CEK

• When the encryption environment is configured.
• When the encryption key is restored.

Set DEK

• When the encryption environment is configured.
• When the encryption key is restored.

Use Keys for CEK/KEK

• When the encryption environment setting is configured from the initial setting.
• When the certificate encryption key is updated.
• When the encryption disk board is added or replaced.

Config Command

Indicates that a configuration command is received.

Not indicate the completion of the operation.

User Auth

Indicates that a user authentication command is received.

Not indicate the completion of the operation.

CHAP

Indicates that the CHAP authentication is completed.

PINDeletion

Delete

PIN deletion operations by PIN deletion tool

AuditLog

Create File

When abnormal files in the audit log are reproduced automatically.

AuditLog

DKCAuditLog was lost

When the audit log created by commands received from hosts is lost.