Installation
The information described on this page is intended for customers who have selected the self-installation option for their VSP E590, VSP E790, or VSP E990 storage system.
Installation of VSP E590 and VSP E790 involves installing and configuring the storage hardware, registering the product, setting up the remote monitoring system, and notifying Hitachi Vantara that your system has been installed and the Hitachi Remote Ops monitoring enabled.
Step 1: Install your VSP E series systemVSP E590 or VSP E790, see Installing your VSP E590 or VSP E790 storage system
VSP E990, see Installing your VSP E990 storage system
Step 2: Register your storage system with the Support Website
Log in to the Support Website here. If you do not already have an account, you will need to register. When registering, you will be asked for information about the product you own. For Product Name, enter VSP E Series and your product serial number, which is labeled MFG. NO. on the rear of the controller.
Step 3: Set up the Hitachi Remote Ops Monitoring system
Download the Hitachi Remote Ops monitoring system software and Installation Guide here. You'll need your site ID when configuring the Hitachi Remote Ops monitoring system. To locate the Site ID, view My Sites/Products on the Support Website. If you do not see your site listed, you will first need to add the site.
Step 4: Notify Hitachi Vantara
After you have configured the Hitachi Remote Ops monitoring system with the correct Site ID open a Case on the Support Website to let us know the system is installed and Hitachi Remote Ops monitoring system is enabled.