Skip to main content

We've Moved!

Product Documentation has moved to docs.hitachivantara.com
Hitachi Vantara Knowledge

Audit Log Quick reference

You can use the audit log quick reference to indicate what each log function represents.

Audit Log Functions

The following table lists the functions used in audit logging and provides their meanings.

Function name

Description

ACM

Audit log functions used for account management

AuditLog

Audit log functions used during audit logging

BASE

Audit log functions used during initial setup

CPAV

Audit log functions used during Compatible PAV operations

E-MAIL

Audit log functions used during E-Mail notification operations

Information

Audit log functions used during log related operations on SVP

Install

Audit log functions used during software or firmware installation

Local Replications

Audit Log functions used during local replication operations

Maintenance

Audit log functions used during general maintenance

Monitor

Audit log functions used to monitor process

PFM

Audit log functions used to monitor performance

PP KEY

Audit log functions used to install or enable a license key

PROV

Audit log functions used to provision the system

Remote Maintenance

Audit log functions used for Remote Maintenance application

Remote Replications

Audit log functions used during remote replication operations

SNMP

Audit log functions used during SNMP Agent operations

SPM

Audit log functions used during Server Priority Manager operations

Spreadsheet

Audit log functions used during External API operations

UVM

Audit log functions used during Universal Volume Manager operations

VM

Audit log functions used during Volume Migration operations

VPM

Audit log functions used during Virtual Partition Manager operations

VS

Audit log functions used during volume shredding operations

Device Manager - Storage Navigator and SVP operation

The storage system logs operations performed from Device Manager - Storage Navigator computer or SVP. The following table lists the function/operation names as well as GUI operations that trigger logging. Functions are listed in alphabetical order.

Function Name

Operation Name

Corresponding GUI Operation

AuditLog

Send Test Message

Sending the test log to the syslog server in the Edit Audit Log Settings window

AuditLog

Set FTP Server

Changing settings in the Edit Audit Log Settings window

AuditLog

Set Syslog Server

Changing settings in the Edit Audit Log Settings window

AuditLog

SIM Complete

SIM complete in the Edit Audit Log Settings window

ACM

AddUsersToUserGroup

Adding a user account to a user group

ACM

UpdateUserGroupAllResourceGrp

Changing the setting of all resource groups assignment for a user group

ACM

UpdateUserGroupResourceGrpBmp

Changing the resource group allocation of a user group

ACM

UpdateUserGroupRole

Changing the role allocation of a user group

ACM

UpdatePassword

Changing a password

ACM

CreateUser

Creating a new user account

ACM

CreateUserGroup

Creating a new user group

ACM

DeleteUserGroups

Deleting a user group

ACM

DeleteUsers

Deleting a user account

ACM

DisableUsers

Disabling a user account

ACM

UpdateUserAuthentication

Changing settings of a user account

ACM

UpdateUserGroupName

Changing the name of a user group

ACM

EnableUsers

Enabling a user account

ACM

Release Lockout

Releasing a user account from lockout

ACM

RemoveUsersFromUserGroup

Removing a user from a user group

ACM

Set Login Message

Setting login message

ACM

Setup Server

Setting a server for the View External Authentication Server Properties

BASE

Advanced Settings

Editing advanced system settings

BASE

Automatic LDAP Password change

Changing, through the REST API, the user ID and password that are used for search or the password only

BASE

Certificate Setting

Creating a private key

Creating a CSR

Creating a self-signed certificate

BASE

Certificate Update

Changing settings in the Update Certificate Files window

BASE

Communication Settings

Changing the TLS communication settings

BASE

Control Panel Backup

Backing up the configuration files using Control Panel

BASE

Control Panel Restore

Restoring the configuration files using Control Panel

BASE

Create Conf Report

Creating a configuration report

BASE

Delete CVAE Info

Changing information from Hitachi Command Suite

BASE

Delete Reports

Deleting a configuration report

BASE

Delete Tasks

Deleting a task

BASE

Disable Auto Delete

Disabling Task Auto Delete function

BASE

Edit Alert Setting

Setting a destination of the alert

BASE

Edit SIM Syslog Serv

Settings of SIM Syslog notification

BASE

Edit Storage System

Editing storage system information

BASE

Enable Auto Delete

Enabling Task Auto Delete function

BASE

Entry Tasks

Applying a task to the storage system

BASE

Flash Disable/Enable

Disabling or enabling the function of displaying Device Manager - Storage Navigator windows by using Adobe Flash Player

BASE

Forcibly Disable SVP

Blocking the SVP forcibly

BASE

Forcibly Fail Over SVP

Failing over the SVP forcibly

BASE

HCSSO Authentication

Launching Device Manager - Storage Navigator from Hitachi Command Suite

BASE

HCSSO SetOneTimeKey

Issuing OneTimeKey from Hitachi Command Suite

BASE

Login

Log in to Device Manager - Storage Navigator or SVP

BASE

Logout

Log out from Device Manager - Storage Navigator or SVP

BASE

Release HTTP Block

Changing settings on the Release HTTP Blocking window

BASE

Resume Tasks

Resuming a task

BASE

Set CVAE Info

Changing information from Hitachi Command Suite

BASE

Set Up HTTP Block

Changing settings on the Set Up HTTP Blocking window

BASE

Suspend Tasks

Suspending a task

BASE

Unlock Forcibly

Cancelling lock forcibly

BASE

Update HCS Crt

Registering or deleting a certificate for Hitachi Command Suite

BASE

Update SMIS CrtFiles

Updating a digital certificate for SMI-S

BASE

Upload SMIS ConfFile

Uploading a configuration file for SMI-S

BASE

WSUS Settings

Enabling and disabling Windows Server Update Services (WSUS), and setting the URL of the WSUS server, and the active hours

BASE

WindowsServerUpdateServices

Applying Security Updates to the SVP by using WSUS

CPAV

Add Alias

Delete Alias

Compatible PAV

E-Mail

MailAddress Write

Valid Flag Update

Settings of E-Mail notification

Information

Delete Log

ORM Value

SIM Complete

SIM Reporting Option

Threshold Value

Log-related operation on Service Processor (SVP)

Install

All Config

Maintenance on SVP

Install

Backup Config

Maintenance on SVP

Install

Dku Emulation

Maintenance on SVP

Install

FlashDrive ORM Value

Maintenance on SVP

Install

Initialize ORM Value

Maintenance on SVP

Install

Machine Install Date

Maintenance on SVP

Install

Micro Program

Maintenance on SVP

Install

NEW Installation

Maintenance on SVP

Install

Restore Config

Maintenance on SVP

Install

Set Battery Life

Maintenance on SVP

Install

Set IP Address

Maintenance on SVP

Install

Set Subsystem Time

Maintenance on SVP

Install

System Option

Maintenance on SVP

Install

System Tuning

Maintenance on SVP

Local Replication

Assign S-VOLs

Assigning secondary volumes of Thin Image pairs

Local Replication

Create Pairs

Creating pairs for ShadowImage, ShadowImage for Mainframe, or Thin Image

Local Replication

Delete Pairs

Deleting pairs for ShadowImage, ShadowImage for Mainframe, or Thin Image

Local Replication

Edit Options

Editing options for ShadowImage or ShadowImage for Mainframe

Local Replication

Initialize

Initializing pairs for ShadowImage and ShadowImage for Mainframe

Local Replication

Release Reserved CTG

Releasing reserved consistency groups for ShadowImage for Mainframe

Local Replication

Remove S-VOLs

Removing secondary volumes of Thin Image pairs

Local Replication

Reserve CTG

Reserving consistency groups for ShadowImage for Mainframe

Local Replication

Resync Pairs

Resynchronizing pairs for ShadowImage, ShadowImage for Mainframe, or Thin Image

Local Replication

Split Pairs

Splitting pairs for ShadowImage, ShadowImage for Mainframe, or Thin Image

Local Replication

Suspend Pairs

Suspending pairs for ShadowImage or ShadowImage for Mainframe

Maintenance

Block

Maintenance from the Maintenance Utility menu

Maintenance

Block(Remove)

Maintenance from the Maintenance Utility menu

Maintenance

Block(Type Change)

Maintenance from the Maintenance Utility menu

Maintenance

Boot System SafeMode

Maintenance from the Maintenance Utility menu

Maintenance

Change SFP Type

Maintenance from the Maintenance Utility menu

Maintenance

Check Remove

Maintenance from the Maintenance Utility menu

Maintenance

DMA Restore

Maintenance on SVP

Maintenance

Drive Interrupt

Maintenance on SVP

Maintenance

DRR Restore

Maintenance on SVP

Maintenance

Edit System Param

Maintenance from the Maintenance Utility menu

Maintenance

Force Rls SysLock

Maintenance from the Maintenance Utility menu

Maintenance

Install

Maintenance from the Maintenance Utility menu

Maintenance

MP Restore

Maintenance on SVP

Maintenance

Reboot GUM

Maintenance from the Maintenance Utility menu

Maintenance

Remove

Maintenance from the Maintenance Utility menu

Maintenance

Replace

Maintenance on SVP

Maintenance

Rest HUB

Maintenance from the Maintenance Utility menu

Maintenance

Restore

Maintenance from the Maintenance Utility menu and maintenance on SVP

Maintenance

Restore(Remove)

Maintenance from the Maintenance Utility menu

Maintenance

Restore(Type Change)

Maintenance from the Maintenance Utility menu

Maintenance

Set Battery Life

Maintenance on SVP

Maintenance

Size Change

Maintenance on SVP

Maintenance

Stop Copy

Maintenance from the Maintenance Utility menu

Maintenance

Switch SVP

Maintenance on SVP

Maintenance

Transfer Config

Maintenance on SVP

Maintenance

Turn Off Locate LEDs

Maintenance from the Maintenance Utility menu

Maintenance

Turn On Locate LEDs

Maintenance from the Maintenance Utility menu

Monitor

Threshold

Maintenance on SVP

PFM

Delete Unused WWNs

Performance Monitor

PFM

Edit CU Monitor Mode

Performance Monitor

PFM

Edit Monitoring SW

Performance Monitor

PFM

Edit WWN

Performance Monitor

PFM

Edit WWN MonitorMode

Performance Monitor

PP KEY

Enable Licenses

Install Licenses

Remove Licenses

Update License Status

License Key

PROV

Add Hosts

  • Adding the specified host to a host group
  • Adding a host to the specified host group

PROV

Add LUN Paths

  • Mapping an LU path
  • Creating an alternate LUN path
  • Copying the selected LUN path

PROV

Assign MP Unit

Assigning an MP unit

PROV

Block LDEVs

Blocking LDEVs

PROV

CalculateTieringMonitorData

Recalculating tier monitoring data from Hitachi Command Suite

PROV

Complete SIMs

Completing SIMs related to a pool

PROV

Create Host Groups

Creating a host group

PROV

Create LDEVs

  • Creating a basic volume
  • Creating an external volume
  • Creating a virtual volume for Dynamic Provisioning

PROV

Create Resource Grps

Creating a resource group

PROV

Create VDKC-Box

Creating a VDKC-Box from Hitachi Command Suite

PROV

Create/Expand Pools

  • Creating a pool
  • Increasing pool capacity

PROV

CreateAlus

Creating an LDEV with the ALU attribute

PROV

CreateiScsiName

Adding hosts to selected iSCSI targets

PROV

CreateiScsiPath

  • Adding iSCSI paths to external storage systems
  • Adding connections to remote storage systems

PROV

CreateiScsiTarget

Creating iSCSI targets

PROV

CreateParityGroups

Creating parity groups

PROV

CreateRemoteChapUser

Adding CHAP users to selected iSCSI targets

PROV

CreateSlus

Creating an LDEV with the SLU attribute from Hitachi Command Suite

PROV

CreateTiPairsWithSlu

Creating Thin Image pairs using LDEVs with the SLU attribute from Hitachi Command Suite

PROV

CreateThinProvisioningVolumes

Creating a Dynamic Provisioning virtual volume from Hitachi Command Suite

PROV

CreateTiVolumes

Creating a secondary volume for Thin Image from Hitachi Command Suite

PROV

Delete Host Groups

Deleting a host group

PROV

Delete LDEVs

  • Deleting a basic volume
  • Deleting an external volume
  • Deleting a virtual volume for Dynamic Provisioning

PROV

Delete Login WWNs

Deleting an unnecessary WWN

PROV

Delete LUN Paths

Removing a LUN path from an LDEV

PROV

Delete Resource Grps

Deleting a resource group

PROV

Delete VDKC-Box

Deleting a VDKC-Box from Hitachi Command Suite

PROV

DeleteAlus

Deleting an LDEV with the ALU attribute

PROV

DeleteiScsiInitiatorUser

Deleting the setting information of users with CHAP authentication on ports

PROV

DeleteiScsiName

Removing hosts from selected iSCSI targets

PROV

DeleteiScsiPath

  • Deleting iSCSI paths to external storage systems
  • Deleting iSCSI paths when connections cannot be added to remote storage systems

PROV

DeleteiScsiTarget

Deleting iSCSI targets

PROV

DeleteLoginiScsiName

Deleting unnecessary iSCSI names

PROV

DeleteParityGroups

Deleting parity groups

PROV

DeleteRemoteChapUser

Removing CHAP users from selected iSCSI targets

PROV

DeleteSlus

Deleting an LDEV with the SLU attribute from Hitachi Command Suite

PROV

DeleteTargetChapUser

Removing CHAP users assigned to iSCSI targets

PROV

DeleteTiVolumes

Deleting a secondary volume for Thin Image from Hitachi Command Suite

PROV

DRU Expiration Lock

Data Retention Utility

PROV

Edit Cmd Dev(Auth)

Editing the user authentication setting for a command device

PROV

Edit Cmd Dev(DevGrp)

Editing the device group setting for a command device

PROV

Edit Cmd Dev(Sec)

Editing the command device security setting

PROV

Edit Command Devices

Enabling or disabling the command device setting

PROV

Edit DRU Attribute

Data Retention Utility

PROV

Edit Full Allocation

Enabling or disabling the Full Allocation setting

PROV

Edit Host

Editing host settings

PROV

Edit Host Grps(Mode)

Editing host group settings

PROV

Edit Host Grps(Name)

Editing host group settings

PROV

Edit LDEVs(tier)

Relocating tier

PROV

Edit External LDEV Tier Rank

Editing the external LDEV tier ranks of pool volumes assigned to a pool

PROV

Edit MP Units

Editing the MP unit setting

PROV

Edit Ports(Address)

Editing a port address

PROV

Edit Ports(Attr)

Changing a port attribute with TrueCopy, TrueCopy for Mainframe, Universal Replicator, Universal Replicator for Mainframe, Universal Volume Manager.

PROV

Edit Ports(Security)

Editing LUN security setting for a port

PROV

Edit Ports(Speed)

Editing the data transfer speed of a port

PROV

Edit Ports(Topology)

Editing the topology setting of a port

PROV

Edit Resource Grp

Editing a resource group

PROV

Edit SCP Time

Setting a SCP (State Change Pending) time to the mainframe host

PROV

Edit Tiering Policy

Editing the tiering policy

PROV

Edit VR Attribute

Volume Retention Manager

PROV

Edit V-VOL Option

  • Creating an LDEV
  • Changing information of an LDEV

PROV

Edit/Delete Pools

  • Deleting a pool
  • Editing pool settings

PROV

Edit/Delete UUIDs

  • Editing an UUID
  • Deleting an UUID

PROV

EditiScsiInitiatorUser

Editing the setting information of users with CHAP authentication on ports

PROV

EditiScsiName

Editing host settings

PROV

EditiScsiNickName

Editing host settings

PROV

EditiScsiTarget

Editing iSCSI target settings

PROV

EditiSNS

Editing port settings

PROV

EditPortInfo

Editing port settings

PROV

EditRemoteChapUser

Editing CHAP user settings

PROV

EditRemoteTargetUser

Editing iSCSI targets

PROV

EditT10piMode

Editing T10 PI mode settings on ports

PROV

EditTargetChapUser

Editing settings of CHAP users assigned to iSCSI targets

PROV

ExecBindingOperation

Binding or unbinding an LDEV with the SLU attribute to or from the LDEV with the ALU attribute

PROV

Expand V-VOLs

Increasing virtual volume capacity

PROV

ExpandSlus

Increasing capacity of an LDEV with the SLU attribute from Hitachi Command Suite

PROV

Force Del MF V-VOLs

Forcibly deleting a V-Vol for Dynamic Provisioning for Mainframe, Dynamic Tiering for Mainframe, or active flash for mainframe

PROV

Format LDEVs

Formatting an LDEV

PROV

Format LDEVs(H)

Formatting a LDEV using the Write to Control Blocks function

PROV

Format LDEVs(Q)

Quick formatting an LDEV

PROV

Initialize Pools

Initializing a pool

PROV

LDEV Name

  • Setting an LDEV name
  • Editing an LDEV

PROV

LdevsFenceForceRelease

Releasing the Mainframe Soft Fence/SPID Fence status forcibly

PROV

MapSecondaryVolumeWithSlu

Mapping LDEVs with the SLU attribute to the secondary volumes of Thin Image pairs from Hitachi Command Suite

PROV

Monitor Pools

Starting the performance monitoring of a pool

PROV

Move Resources

  • Adding a resource to a resource group
  • Removing a resource from a resource group

PROV

OperateSiPairsWithSlu

Operating ShadowImage pairs using LDEVs with the SLU attribute from Hitachi Command Suite

PROV

OperateTiPairsWithSlu

Operating Thin Image pairs using LDEVs with the SLU attribute from Hitachi Command Suite

PROV

Pool Name

  • Setting a pool name
  • Deleting a pool name

PROV

Reclaim Zero Pages

Releasing pages in a virtual volume

PROV

Release HostReserved

Releasing Host-Reserved LUNs

PROV

Relocate Pool

Starting the tier relocation of a pool

PROV

Remove Hosts

Removing a host from a host group

PROV

Restore LDEVs

Restoring an LDEV

PROV

Restore Pools

Restoring a pool

PROV

RevertTiPairsWithSlu

Reverting Thin Image pairs using LDEVs with the SLU attribute from Hitachi Command Suite

PROV

Set PageTieringLevel

Setting a tiering policy in pages

PROV

Set SSID

  • Creating an LDEV
  • Setting an SSID

PROV

Set Virtual LDEV

  • Editing virtualization management settings
  • Setting or releasing the GAD reserve attribute on a volume for the secondary volume of a global-active device pair

PROV

Shrink Pool

Decreasing pool capacity

PROV

StartParityGroupsFormat

Formatting a parity group

PROV

StopFormat

Interrupting the format task for a parity group

PROV

Stop Monitoring

Stopping the performance monitoring of a pool

PROV

Stop Reclm ZeroPages

Stop releasing pages in a virtual volume

PROV

Stop Relocating

Stopping the tier relocation of a pool

PROV

Stop Shrinking Pool

Stop decreasing pool capacity

PROV

UnmapSecondaryVolumeWithSlu

Unmapping the secondary volumes of Thin Image pairs using LDEVs with the SLU attribute from Hitachi Command Suite

PROV

UpdateAluaMode

  • Editing an LDEV
  • Creating pairs for global-active device
  • Resynchronizing pairs for TrueCopy, TrueCopy for Mainframe, Universal Replicator, Universal Replicator for Mainframe, and global-active device
  • Resynchronizing pairs for global-active device by the consistency group

PROV

UpdateAsymmetricAccessStatePerHG

Editing Asymmetric Access States settings

PROV

UpdateMFSystemFunctions

Changing settings of the Mainframe System Function

PROV

UpdateParityGroupSettings

Enabling or disabling accelerated compression

PROV

UpdateSpareDrives

Assigning or releasing the assignment of a spare drive

PROV

VTOC

Volume Retention Manager

Remote Maintenance

Micro Program

PS Control

Reboot MP

Reboot Port

Reboot SVP

StartVerify

StopVerify

Switch SVP

Transfer Config

Hitachi Remote Ops

Remote Replication

Add Path

Adding paths for TrueCopy, TrueCopy for Mainframe, Universal Replicator, and Universal Replicator for Mainframe on the remote storage system.

Remote Replication

Add Quorum Disk ID

Adding quorum disk IDs used by global-active device.

Remote Replication

Add RCU

Adding remote storage system settings for TrueCopy, TrueCopy for Mainframe, Universal Replicator, and Universal Replicator for Mainframe.

Remote Replication

Change JNL Option

Changing the journal option for Universal Replicator and Universal Replicator for Mainframe.

Remote Replication

Change Mirror Option

Changing the mirror option for Universal Replicator and Universal Replicator for Mainframe.

Remote Replication

Change RCU Option

Changing the remote storage system option for TrueCopy, TrueCopy for Mainframe, Universal Replicator, and Universal Replicator for Mainframe.

Remote Replication

Clear SIM

Clearing SIMs for TrueCopy for Mainframe, Universal Replicator for Mainframe, and global-active device.

Remote Replication

Create Pairs

Creating pairs for TrueCopy, TrueCopy for Mainframe, Universal Replicator, Universal Replicator for Mainframe, and global-active device.

Remote Replication

Delete Cmd.Dev

Deleting a command device for TrueCopy for Mainframe.

Remote Replication

Delete Pairs

Deleting pairs for TrueCopy, TrueCopy for Mainframe, Universal Replicator, Universal Replicator for Mainframe, and global-active device.

Remote Replication

Delete Path

Deleting paths for TrueCopy, TrueCopy for Mainframe, Universal Replicator, and Universal Replicator for Mainframe on the remote storage system.

Remote Replication

Del Quorum Disk ID

Deleting quorum disk IDs used by global-active device.

Remote Replication

Delete RCU

Deleting the remote storage system setting for TrueCopy, TrueCopy for Mainframe, Universal Replicator, and Universal Replicator for Mainframe.

Remote Replication

Edit EXCTG

Creating and deleting journals on expanded consistency groups for Universal Replicator for Mainframe

Remote Replication

Edit Options

Setting the remote replica options for TrueCopy, TrueCopy for Mainframe, Universal Replicator, Universal Replicator for Mainframe, and global-active device.

Remote Replication

Edit Pair Options

Setting pair options for TrueCopy, TrueCopy for Mainframe, Universal Replicator, and Universal Replicator for Mainframe.

Remote Replication

Journal Owner

Setting the journal ownership for Universal Replicator and Universal Replicator for Mainframe.

Remote Replication

Journal Vol

Creating or deleting of journal or assigning journal volumes for Universal Replicator and Universal Replicator for Mainframe.

Forcibly removing journals from expanded consistency groups for Universal Replicator for Mainframe

Remote Replication

R-Cmd.Dev.

Setting a remote command device for Universal Replicator and Universal Replicator for Mainframe.

Remote Replication

Resync Pairs

Resynchronizing pairs for TrueCopy, TrueCopy for Mainframe, Universal Replicator, Universal Replicator for Mainframe, and global-active device.

Remote Replication

Split Pairs

Split pairs for TrueCopy, TrueCopy for Mainframe, Universal Replicator, and Universal Replicator for Mainframe.

Remote Replication

Suspend Pairs

Suspending pairs for global-active device.

Remote Replication

UpdateQuorumDisks

Editing the value of Read Response Guaranteed Time When Quorum monitoring has stopped for global-active device.

SNMP

UpdateSnmpSetting

Setting information related to SNMP

SPM

Change SPMGrp

Clear SPM Info

Default Set

Set All Prio Port

Set All Prio WWN

Set Ctrl Kind

Set Prio Port

Set Prio WWN

SPMGrp Del/Chg

Update Port WWN

Update SPMGrp

Update WWN

Server Priority Manager

Spreadsheet

CflSet End

CflSet Start

Performing the CFLSET command using External API

UVM

Add External Volumes

Mapping an external volume

UVM

Assign MP Blade

Assigning an MP blade for an external volume

UVM

Delete ES VOLs

Releasing external volume mapping

UVM

Disconnect ES Paths

Disconnecting an external path

UVM

Disconnect ES VOLs

Disconnecting an external storage system or an external volume

UVM

Edit ES Path Config

  • Adding a path to an external path group
  • Deleting a path from an external path group
  • Changing priority among external paths

UVM

Edit ES VOLs

Editing external volume settings

UVM

Edit External WWNs / iSCSI Targets

  • Editing external WWN parameters
  • Editing external iSCSI target parameters

UVM

ProfileUpgrade

Operable by tool only

UVM

Reconnect ES Paths

Reconnecting an external path

UVM

Reconnect ES VOLs

Reconnecting an external storage system or external volume

VM

Delete All Histories

Del Migration Plans

Migrate Volumes

Volume Migration

VPM

Edit CLPR

Creating, adding, deleting, or editing CLPR

Migrating parity groups to a different CLPR

VS

Abort Shredding

Aborting shredding an LDEV

VS

End Shredding

Ending shredding an LDEV

VS

Shred LDEVs

Shredding an LDEV

XRC

Set XRC Option

Compatible XRC

Encryption Key operation

The following tables show the function names, operation names and event names of encryption keys for data encryption and each item is listed in alphabetical order. The logs for the operation names listed in the first table are output to Auditlog information file 1, while the logs for the event names listed in the second table are output to Auditlog information file 2.

Function Name

Operation Name

Corresponding GUI Operation

ENC

Add keys to DKC

Creating encryption keys

Configuring encryption environment settings

Backup Keys

Backing up encryption keys on the key management server or backing up encryption keys as a file on the Device Manager - Storage Navigator PC

Backup Keys to File

Backing up encryption keys as a file on the Device Manager - Storage Navigator PC

Backup Keys to Serv

Backing up encryption keys on the key management server

Backup Keys to Serv(Auto)

Automated backing up encryption keys on the key management server

Create KEK Dynamic

Configuring encryption environment settings

Updating key encryption keys

Create Keys

Creating encryption keys

Configuring encryption environment settings

Create Keys On Serv

Creating encryption keys

Backing up encryption keys on the key management server

Configuring encryption environment settings

Delete KEK Dynamic

Configuring encryption environment settings

Updating key encryption keys

Delete Keys

Deleting encryption keys

Delete Keys on Serv

Deleting encryption keys backed up on the key management server

Delete Keys on Serv(Auto)

Deleting encryption keys backed up automatically on the key management server

DEK assign SpareDisk

Configuring encryption environment settings

DEK delete

Configuring encryption environment settings

Edit Encryption

Enabling/disabling the encryption in a parity group level

Edit ENC Settings

Configuring encryption environment settings

Edit Password Policy

Editing password policies for backing up encryption keys

Register KEK Dynamic

Configuring encryption environment settings

Updating key encryption keys

Rekey CEK

Configuring encryption environment settings

Updating certificate encryption keys

Rekey KEK Dynamic

Updating key encryption keys

Configuring encryption environment settings

Restore Keys

Restoring encryption keys from back up copies on the key management server or the Device Manager - Storage Navigator PC

Restore Keys fr File

Restoring encryption keys from back up copies on the Device Manager - Storage Navigator PC

Restore Keys fr File(Forcibly)

Restoring encryption keys forcibly from back up copies on the management client

Restore Keys fr Serv

Restoring encryption keys from back up copies on the key management server

Restore Keys fr Serv(Forcibly)

Restoring encryption keys forcibly from back up copies on the key management server

Retry KEK Dynamic

Reacquisition of key encryption keys

Set Up Key Mng Serv

Configuring encryption environment settings

Succeeded Backup to Serv

Setting of succeeded backup flag

KEK Acquisition

Acquisition Key

Reacquisition of key encryption keys

Set Key

Key Recovery

Restore Keys fr Serv(Boot)

Restoration of encryption keys

Set Key Blob

Function Name

Event Name

Output Trigger

ENC

Change CEK Status

  • When the encryption environment setting is configured from the initial setting.
  • When the certificate encryption key is updated.
  • When the encryption disk board is deleted or replaced.

Change DEK Status

  • When the encryption environment setting is configured from the initial setting.
  • When the encryption environment setting is initialized.
  • When the data encryption is enabled/disabled.
  • When Dynamic sparing, Correction copy or Copy back is performed.
  • When the drive (Hard disk drive, SSD, SCM, or FMD) is added, deleted or replaced after the encryption environmental setting is configured.

Clear Keys

When the encryption environment setting is initialized.

Create Keys

When the encryption key is created.

Delete Keys

When the encryption key is deleted.

Use Keys for CEK/KEK

  • When the encryption environment setting is configured from the initial setting.
  • When the certificate encryption key is updated.
  • When the encryption disk board is added or replaced.

Command sent from the host

The following table describes the function name output to the audit log file when receiving commands from the host.

A CCI command does not always correspond to a command that is output by the audit logs.

Function Name

Description

Config Command

Indicates that a configuration command was received.

Not indicate the completion of the operation.

FC-SP

Indicates that the FC-SP authentication is completed.

User Auth

Indicates that a user authentication command was received.

Not indicate the completion of the operation.

PIN Deletion Tool operation

The following table shows the function name and the operation name concerning the PIN Deletion Tool.

Function Name

Operation Name

Corresponding GUI Operation

PINDeletion

Delete

PIN deletion operation by PIN deletion tool

Audit log reproduced output

The following table describes the function name, event name, and triggering events that are output when the audit log file is reproduced. The "create file" event name will be automatically output only once.

Function Name

Event Name

Output Trigger

AuditLog

Create File

Output when abnormal files in the audit log are reproduced automatically.

Audit log lost output

The following table shows the function name and the event name that are output when the audit log by the commands that the storage system accepted from the host has been lost. The "DKCAuditLog was lost" event name will be automatically output only once for each output trigger.

Function Name

Event Name

Output Trigger

AuditLog

DKCAuditLog was lost

Output when the audit log by the commands that the storage system accepted from the host has been lost.