Report examples: table view

CHAP Users report

The following figure shows an example of a CHAP Users report. The table following the figure describes the items in the report.

Item	Description
Port Location	Name of the port
User Name	Name of the CHAP user for authentication
iSCSI Target Alias	Alias of the iSCSI target
iSCSI Target Name	Name of the iSCSI target

Disk Boards report

The following figure shows an example of a Disk Boards report. The table following the figure describes the items in the report.

Item	Description
DKB	Location of the disk board. "External" is displayed when the storage system has an external storage system. "External (FICON DM)" is displayed when the storage system has volumes for FICON DM.
Number of PGs	The number of the parity groups that the disk board controls. If "DKB" is "External", this item indicates the number of parity groups mapped to external volumes. If "DKB" is "External (FICON DM)", this item indicates the number of parity groups mapped to volumes for FICON DM.
Number of LDEVs (Total)	The number of the logical volumes belonging to the parity groups that the disk board controls.
Number of LDEVs (Unallocated)	The number of the logical volumes that are inaccessible from the host and belong to the parity groups controlled by the disk board.
Total LDEV Capacity (MB)	Total capacity of the logical volumes belonging to the parity groups that the disk board controls.
Unallocated LDEV Capacity (MB)	Total capacity of the logical volumes that are inaccessible from the host and belong to the parity groups controlled by the disk board.

Host Groups / iSCSI Targets report

The following figure shows an example of a Host Groups / iSCSI Targets report. The table following the figure describes the items in the report.

Item	Description
Port Location	Name of the port
Type	Type of the host group
Host Group Name / iSCSI Target Alias	Name of the host group / alias of the iSCSI target
Host Group ID / iSCSI Target ID	Number of the host group / ID of the iSCSI target
iSCSI Target Name	Name of the iSCSI target
Resource Group Name	Resource Group Name where the host group belongs
Resource Group ID	Resource Group ID where the host group belongs
Number of LUNs	The number of LU paths defined to the host group
Number of LDEVs	The number of logical volumes that are accessible from the hosts in the host group
Number of PGs	The number of parity groups with logical volumes that are accessible from the hosts in the host group
Number of DKBs	The number of disk boards controlling the parity groups where the logical volumes that are accessible from the hosts in the host group belong
Total LDEV Capacity (MB)	Total capacity of the logical volumes accessible from the hosts in the host group. This is the total capacity of LDEVs referred to in "Number of LDEVs".
Port Security	Security of the port
Authentication : Method	iSCSI target method authentication settings CHAP None Comply with Host Setting
Authentication : Mutual CHAP	Enable or disable the iSCSI target mutual CHAP Enabled Disabled
Authentication : User Name	Authenticated iSCSI target user name
Authentication : Number of Users	The number of authenticated users registered in the iSCSI target
Host Mode	Host mode of the host group
Host Mode Option	Host mode option of the host group. Host mode options are separated by semicolons (;) when more than one option is specified.
Number of Hosts	The number of the hosts in the host group.

Hosts report

The following figure shows an example of a hosts report. The table following the figure describes the items in the report. When a host is registered to more than one port, more than one record shows information about the same host.

Item	Description
Port Location	Name of the port
Type	Port type
Port Internal WWN	Port WWN
Port Security	Port security setting
Host Group Name / iSCSI Target Alias	Name of the host group / alias of the iSCSI target
iSCSI Target Name	Name of the iSCSI target
Host Mode	Host mode of the host group
Host Mode Option	Host group host mode option. When more than one host mode option is specified, they are separated by semicolons (;)
Host Name	Name of the host that can access the LU path through the port
HBA WWN / iSCSI Name	Host WWN / host iSCSI name. The name is in 16-digit hex format.

Logical Devices report

The following figure shows an example of a logical volumes report. The table following the figure describes the items in the report.

Item	Description
LDEV ID	The logical volume number
LDEV Name	The logical volume name
Capacity (MB)	Capacity of the logical volume
Emulation Type	Emulation type of the logical volume
Resource Group Name	Resource group name where LDEV belongs
Resource Group ID	Resource group ID where LDEV belongs
PG	The parity group number. If the number starts with "E" (for example, E1-1), the parity group contains external volumes. If the number starts with "M" (for example, M1-1), the parity group contains FICON DM volumes. A hyphen displays for Dynamic Provisioning or Thin Image V-VOLs.
RAID Level	RAID level of the parity group where the logical volume belongs¹
Drive Type/Interface/RPM	Drive type, drive control name, and revolutions-per-minute (RPM) of the drive of the parity group where the logical volume belongs. A hyphen (-) is displayed as RPM when the drive is not HDD.¹
Drive Type-Code	Type code of the drive of the parity group where the logical volume belongs¹
Drive Capacity	Capacity of the drive of the parity group where the logical volume belongs.¹
PG Members	List of the drive locations of the parity group where the logical volume belongs¹
Allocated	Information about whether the host can access the logical volume. For mainframe volumes and multi-platform volumes, "`Y`" is displayed unless the volumes are in the reserved status.
SSID	SSID of the logical volume
CVS	Information about whether the logical volume is a customized volume
OCS	Oracle checksum
Attribute	The attribute of the logical volume
Provisioning Type	Provisioning type of the logical volume
Pool Name	For V-VOLs of Dynamic Provisioning, the name of the pool related to the logical volume is displayed¹ If the logical volume attribute is Pool, the name of the pool where the logical volume belongs is displayed When neither of the above are displayed, the pool name is blank
Pool ID	The ID of the pool indicated by "Pool Name" A hyphen (-) displays for volumes other than pool-VOLs or V-VOLs
Current MPU	The MP unit controlling LDEVs actually.
Setting MPU	The MP unit configured to control LDEVs.
Command Device: Security	Indicates whether Security is specified as the attribute for the command device. A hyphen (-) displays when "Attribute" is not "CMDDEV".
Command Device: User Authentication	Indicates whether User Authentication is specified as the attribute for the command device. A hyphen (-) displays when "Attribute" is not "CMDDEV".
Command Device: Device Group Definition	Indicates whether Device Group Definition is specified as the attribute for the command device. A hyphen (-) displays when "Attribute" is not "CMDDEV".
Encryption	Indicates whether the parity group to which the LDEV belongs is encrypted. For internal volumes: Enabled (encrypted) or Disabled (not encrypted) For external volumes: blank
Notes: A hyphen (-) displays if the LDEV is an external volume or a FICON DM volume.

LUNs report

The following figure shows an example of an LU path definitions report. A record is created for each LU path. The table following the figure describes the items in the report.

Item	Description
Port Location	Name of the port
HBA WWN / iSCSI Name	Port WWN or name of the iSCSI (16 digits in hexadecimal)
Port Security	Name of the type of security of the port
Host Group Name / iSCSI Target Alias	Name of the host group or alias of the iSCSI target
iSCSI Target Name	Name of the iSCSI target
Host Mode	Host mode of the host group
Host Mode Option	Host mode option of the host group. Host mode options are separated by semicolons (;) when more than one option is specified.
LUN	Logical unit number
LDEV ID	Logical volume number
Emulation Type	Emulation type of the logical volume
Capacity (MB)	Capacity of the logical volume
Asymmetric Access State	Asymmetric access status: Active/Optimized: Prioritized Active/Non-Optimized: Lower priority

MP Units report

The following figure shows an example of an MP units report. The table following the figure describes the items in the report.

Item	Description
MP Unit ID	MP unit ID
Auto Assignment	Auto assignment attribute for the MP unit
Number of Resources (LDEV)	Number of LDEVs that the MP unit controls
Number of Resources (Journal)	Number of journals that the MP unit controls
Number of Resources (External Volume)	Number of external volumes that the MP unit controls (includes volumes for FICON DM)
Number of Resources (Total)	The total number of resources that the MP unit controls. It is the total of Number of Resources (LDEV), Number of Resources (Journal), and Number of Resources (External Volume).

MP Unit Details report

The following figure shows an example of an MP unit details report. The table following the figure describes the items in the report.

Item	Description
MP Unit ID	MP unit ID
Auto Assignment	Auto assignment attribute for the MP unit
Resource ID	ID of this resource that the MP unit controls
Resource Name	The name of the resource that the MP unit controls. If "Type" is LDEV, the LDEV name that is set is displayed. A hyphen (-) displays for journal volumes or external volumes.
Type	The type of the resource that the MP unit controls

Parity Groups report

The following figure shows an example of a parity groups report. The table following the figure describes the items in the report.

Item	Description
PG	Parity group number If the number starts with "E" (for example, E1-1), the parity group contains external volumes (Hitachi Universal Volume Manager User Guide). If the number starts with "M" (for example, M1-1), the parity group contains volumes for FICON DM.
DKB	Name of the disk board that controls the parity group¹
RAID Level	RAID level of the parity group¹
Resource Group Name	Name of the resource group in which the parity group belongs
Resource Group ID	ID for the resource group in which the parity group belongs
Emulation Type	Emulation type of the parity group
Number of LDEVs (Total)	The number of the logical volumes in the parity group
Number of LDEVs (Unallocated)	The number of the logical volumes in the parity group that the host cannot access
Total LDEV Capacity (MB)	Capacity of the logical volumes in the parity group
Unallocated LDEV Capacity (MB)	Capacity of the logical volumes in the parity group that the host cannot access
Drive Type-Code	The type code of the drive in the parity group. The type code of the first drive in the parity group. If the parity group contains external volumes, the drive type code displays the vendor, the model, and the serial number of the storage system. A hyphen (-) displays if the parity group contains volumes for FICON DM.
Drive Type/Interface/RPM	Drive type, drive control name, and revolutions-per-minute (RPM) of the drive in the parity group where the LDEV belongs¹ A hyphen (-) is displayed instead of the RPM when the drive is not HDD.
Drive Capacity	Capacity of the drive in the parity group¹
RAID Concatenation #0	The number indicating a parity group #0 connected to this parity group^1,2
RAID Concatenation #1	The number indicating a parity group #1 connected to this parity group^1,2
RAID Concatenation #2	The number indicating a parity group #1,2 connected to this parity group^1,2
Encryption	Indicates whether the parity group is encrypted. For internal volumes: Enabled (encrypted) or Disabled (not encrypted) For external volumes: A hyphen (-) is displayed
Accelerated Compression	Accelerated compression of the parity group If accelerated compression is supported, Enabled or Disabled is displayed. If accelerated compression is not supported, a hyphen (-) is displayed.
Automatically manage compressed space of FMD parity group	Indicates whether to manage the compressed area of the FMD parity group automatically. When accelerated compression is supported, Enabled (the area is managed automatically) or Disabled (the area is not managed automatically) is displayed If accelerated compression is not supported, a hyphen (-) is displayed.
Notes: A hyphen is displayed if the parity group contains external volumes or FICON DM volumes. A hyphen is displayed if the parity group is not connected with another parity group or if the parity group contains external volumes including volumes for FICON DM.

Physical Devices report

Item	Description
Location	PDEVs name
CR#	C# and R# (2-digit hexadecimal numbers), which identify the PDEV Output in the format XX/YY, where: XX: C# YY: R#
PG	PDEVs parity group
Emulation Type	PDEVs emulation type
Drive Type	PDEVs drive types HHD SSD FMD DC2 SCM SSD(RI)
Interface	PDEVs control name SAS SATA NVMe
RPM	Revolutions per minute 7200 10000 15000 A hyphen (-) displays as RPM when the drive is not HDD.
Drive Type-Code	Drive type code of the drive to which the parity group belongs Output example: SLB5E-M19RSS;SLB5G-M19RSS If multiple drive types are configured, they are separated by semicolon (;).
Drive Size	Drive size (inches) 2.5 3.5
Drive Capacity	Physical drive capacity (GB or TB)
Drive Version	Drive firmware version
DKB1	Name of the DKB1 controlling the PDEV
DKB2	Name of the DKB2 controlling the PDEV
Serial Number#	Serial number of this PDEV (yymm xxxxxxxx) yy: Last 2 digits of the year mm: month (2 characters) xxxxxxxx: Serial number of this PDEV
RAID Level	RAID level of PDEVs RAID1(2D+2D) RAID5(3D+1P) RAID5(7D+1P) RAID6(6D+2P) RAID6(14D+2P)
RAID Concatenation#0	Number of parity group (#0) being concatenated to Physical drive Output example: 2-1, 3-1, 4-1
RAID Concatenation#1	Number of parity group (#1) being concatenated to Physical drive Output example: 2-1, 3-1, 4-1
RAID Concatenation#2	Number of parity group (#2) being concatenated to Physical drive Output example: 2-1, 3-1, 4-1
Resource Group Name	Name of the resource group to which the PDEV parity group belongs
Resource Group ID	ID of the resource group to which the PDEV parity group belongs (0 to 1023 decimal number)
Encryption	Encryption status of the parity group to which the PEDV belongs Enabled: Encryption enabled Disabled: Encryption disabled

Ports report

The following figure shows an example of part of a ports report. The actual report includes several more columns of information. The table following the figure describes the items in the report.

Item	Description
CHB	Name of the channel board (also called a front-end director)
Type	Package type of the channel board
Port Location	Name of the port on the channel board
Port Attribute	Attribute of the port
iSCSI Virtual Port Mode	Mode of the iSCSI virtual port
TCP Port Number	Port number to use for a socket (decimal)
Internal WWN / Internal iSCSI Name	WWN / iSCSI name of the port
Fabric	One of the Fibre topology settings indicating the setting status of the Fabric switch¹
Connection Type	One of the Fibre topology settings¹ Point to Point FC-AL
IPv4 : IP Address	IPv4 address of the port Output example: 192.168.0.100
IPv4 : Subnet Mask	IPv4 subnet mask of the port Output example: 255.255.255.0
IPv4 : Default Gateway	IPv4 default gateway of the port Output example: 255.255.255.0
IPv6 : Mode	IPv6 settings of the port Enabled Disabled
IPv6 : Link Local Address	IPv6 link local address of the port (16-digit hexadecimal)
IPv6 : Global Address	IPv6 global address of the port. Output example: `xxxx`:`xxxx`:`xxxx`:`xxxx`:`xxxx`:`xxxx`:`xxxx`:`xxxx` (hexadecimal)
IPv6 : Global Address 2	IPv6 global address 2 of the port. Output example: `xxxx`:`xxxx`:`xxxx`:`xxxx`:`xxxx`:`xxxx`:`xxxx`:`xxxx` (hexadecimal)
IPv6 : Assigned Default Gateway	Assigned IPv6 default gateway
Selective ACK	Selective ACK mode Enabled Disabled
Ethernet MTU Size (Byte)	MTU settings (binary) 1,500
Keep Alive Timer	iSCSI keep alive timer (0 to 64,800) (sec)
VLAN : Tagging Mode	Tagging mode of VLAN Enabled Disabled
VLAN : ID	Number of VLAN set to the port (1 to 4,094)
CHAP User Name	User name for the CHAP authentication
iSNS Server : Mode	iSNS mode settings ON OFF
iSNS Server : IP Address	IP address of the iSNS server (30 to 65,535)
iSNS Server : TCP Port Number	Number of the TCP port used in iSNS (binary)
Address (Loop ID)	Fibre port address and Loop ID of the port¹
Port Security	Security of the port¹ Enabled Disabled
Speed	Data transfer speed of the port¹
SFP Data Transfer Rate	Maximum transfer rate of SFP which the mounted package supports. 10G 16G 32G A hyphen (-) is displayed if "Type" is "2HS10S".
T10 PI Mode	Indicates whether the T10 PI mode can be applied to the port. Enabled Disabled Blank if the port type is a Fibre port other than 16FC2(CHB). For iSCSI ports, a hyphen (-) is displayed.
Resource Group Name	Name of the resource group to which the port belongs
Resource Group ID	ID for the resource group to which the port belongs (0 to 1023)
Number of Hosts	The number of the hosts registered to the port¹
Number of LUNs	The number of the LU paths defined to the port¹
Number of LDEVs	The number of the logical volumes that can be accessed through the port¹
Number of PGs	The number of the parity groups having the logical volumes that can be accessed through the port¹
Number of DKBs	The number of the disk boards controlling the parity group that contains the logical volumes that can be accessed through the port¹
Notes: For ports in a mainframe system, a hyphen is displayed.

Power Consumption report

The following figure shows an example of a power consumption report. A record is created every two hours for each power consumption and temperature monitoring data. The table following the figure describes the items in the report.

No records are created if the DKC is turned off. If the system is in maintenance mode or the SVP is rebooted, up to two hours of records could be lost.

If a failure occurs in the storage system, the correct information might not be output.

A hyphen(-) is displayed if the power and temperature information cannot be acquired due to a unit or network failure.

Item	Description
Power Consumption Average (W)	Average of the power consumption
Power Consumption Maximum (W)	Maximum of the power consumption
Power Consumption Minimum (W)	Minimum of the power consumption
TEMP:HSNBX0-HSNPANEL0 Average (degrees C)	Average temperature of HSNBX0:HSNPANEL0
TEMP:HSNBX0-HSNPANEL0 Maximum (degrees C)	Maximum temperature of HSNBX0:HSNPANEL0
TEMP:HSNBX0-HSNPANEL0 Minimum (degrees C)	Minimum temperature of HSNBX0:HSNPANEL0
TEMP:HSNBX1-HSNPANEL1 Average (degrees C)	Average temperature of HSNBX1:HSNPANEL1
TEMP:HSNBX1-HSNPANEL1 Maximum (degrees C)	Maximum temperature of HSNBX1:HSNPANEL1
TEMP:HSNBX1-HSNPANEL1 Minimum (degrees C)	Minimum temperature of HSNBX1:HSNPANEL1
TEMP:DKC0-Cluster1 Average (degrees C)	Average temperature of DKC0:CL1
TEMP:DKC0-Cluster1 Maximum (degrees C)	Maximum temperature of DKC0:CL1
TEMP:DKC0-Cluster1 Minimum (degrees C)	Minimum temperature of DKC0:CL1
TEMP:DKC0-Cluster2 Average (degrees C)	Average temperature of DKC0:CL2
TEMP:DKC0-Cluster2 Maximum (degrees C)	Maximum temperature of DKC0:CL2
TEMP:DKC0-Cluster2 Minimum (degrees C)	Minimum temperature of DKC0:CL2
TEMP:DKC1-Cluster1 Average (degrees C)	Average temperature of DKC1:CL1
TEMP:DKC1-Cluster1 Maximum (degrees C)	Maximum temperature of DKC1:CL1
TEMP:DKC1-Cluster1 Minimum (degrees C)	Minimum temperature of DKC1:CL1
TEMP:DKC1-Cluster2 Average (degrees C)	Average temperature of DKC1:CL2
TEMP:DKC1-Cluster2 Maximum (degrees C)	Maximum temperature of DKC1:CL2
TEMP:DKC1-Cluster2 Minimum (degrees C)	Minimum temperature of DKC1:CL2

Power Consumption report for DKU00
Item	Description
TEMP:DKU00-DBS000-1 Average (Temperature in degrees C) , TEMP:DKU00-DBS000-1 Maximum (Temperature in degrees C) , TEMP:DKU00-DB000-1 Minimum (Temperature in degrees C) , … ,TEMP:DKU00-DB007-2 Average (Temperature in degrees C) , TEMP:DKU00-DB-2 Maximum (Temperature in degrees C) , TEMP:DKU00-DB-2 Minimum (Temperature in degrees C)	Average temperature, maximum temperature, and minimum temperature of the drive box (DB) for the two-hour period. Outputs in the following format: TEMP:DKUXX-DBYYY-DBPSYYY-A Average, Maximum, or Minimum (Temperature in degrees Celsius) DKUXX: DKU location number (decimal) DBYYY or DBYYY&ZZZ: DB location number The display format of DB location numbers differs depending on the type of DB. DBYYY: DBL location number (decimal) DBYYY&ZZZ: Location number of DBS2, DBF3, or DBN (decimal) Two DB numbers are written together, and then displayed as one DB location. DBPSYYY-A: DBPS location number YYY: DB location number (decimal) A: DBPS number (1, 2)

Spare Drives report

The following figure shows an example of a spare drives report. The table following the figure describes the items in the report.

Item	Description
Drive Capacity	Capacity of the spare drive
Drive Type-Code	Type code of the spare drive
Location	Location of the spare drive

SSD Endurance report

The following figure shows an example of an SSD/SCM endurance report. The table following the figure describes the items in the report.

Item	Description
Drive Type-Code	Type code of the drive
Drive Capacity	Capacity of the drive
Location	Location of the drive
Used Endurance Indicator (%)	The used endurance of SSD life (0 to 100) The value of this indicator increases due to drive operation associated with internal processing of the storage system, and the host I/O. Even when no data is copied due to a drive failure, the value of this indicator increases because the spare drive also performs internal processing.

Storage System Summary report

The following illustration shows an example of part of a report of a summary of the storage system. The actual report includes several more rows of information. The table following the illustration describes the items in the report.

Item	Description
Storage System Type	Type of the storage system.
Serial Number	Serial number of the storage system.
IP Address	IP address of the SVP.
Software Versions	Version of the following programs. DKCMAIN HTP ISCF FCBK ISW DKB DKBN SVP CBA SSVP GUM FCDG ROMBOOT RAMBOOT Expander NSW CONFIG CFM HDD HDD (SVP) Printout Tool EDKBN
Number of CUs	The number of control units in the storage system
Shared Memory Size (GB)	Shared memory capacity Includes the cache management information (directory)
Cache Size (GB)	Cache capacity
Number of DKBs	The number of disk boards on the module
System Options	List of the system options specified for the storage system
Drive Capacity (TB)	Total capacity of drives in the storage system except for external volumes
Spare Drive Capacity (TB)	Total capacity of the spare drives in the storage system
Free Drive Capacity(TB)	Total capacity of the free drives in the storage system
OPEN Volume Capacity (GB) ¹	List of the capacity of the open volumes
M/F Volume Capacity (GB) ¹	The list of the capacity of the mainframe volumes and multi-platform volumes
Number of LDEVs¹	List of the numbers of the volumes in the following status. allocated unallocated reserved free The list for open-systems and the list for mainframe-systems are separate.
Notes: You cannot sort this list.

We've Moved!

Product Documentation has moved to docs.hitachivantara.com

CHAP Users report

Disk Boards report

Host Groups / iSCSI Targets report

Hosts report

Logical Devices report

LUNs report

MP Units report

MP Unit Details report

Parity Groups report

Physical Devices report

Ports report

Power Consumption report

Spare Drives report

SSD Endurance report

Storage System Summary report

Still Looking?

Quick Links

CHAP Users report

Disk Boards report

Host Groups / iSCSI Targets report

Hosts report

Logical Devices report

LUNs report

MP Units report

MP Unit Details report

Parity Groups report

Physical Devices report

Ports report

Power Consumption report

Spare Drives report

SSD Endurance report

Storage System Summary report