Regulatory specifications
This appendix provides regulatory information for storage systems and includes tables with explanations of regulatory requirement statements from various countries.
Regulatory compliance
This equipment has been tested and is certified to meet the following certifications.
|
Standard |
Specification |
Mark on the product |
Country |
|
Electronic emission control |
FCC Part 15 Subpart B Class A |
Yes (FCC) |
U.S.A |
|
Electronic emission control |
FCC Part 15 Subpart B Class A:2010, Class A ICES-003 Issue 4 Class A |
Yes (UL) |
Japan |
|
Safety certification |
TUV Safety Report and TUV-NRTL Certification, FCC Verification Report |
Yes (TUV) |
EU, North America |
|
Electronic emission certifications |
TUV Safety Report, EMC Report, TUV GS License, EMC Certificate, CE Mark |
Yes (CE Mark) |
European Union |
|
Electronic emission control |
CB Report and Certificate |
Yes (TUV) |
Worldwide |
|
Electronic emission control |
Test Report for C-Tick Approval |
Yes |
Australia and New Zealand |
|
VCCI Registration for Product and Accessories |
VCCI Class A |
Yes (VCCI) |
Japan |
|
Safety certification |
GOST Certificate for Product and Accessories |
Yes (GOST) |
Russia |
|
Electronic emission control |
BSMI Approval for Product and Accessories |
Yes (BSMI) |
Taiwan |
|
Electronic emission control |
RRL Approval and KTL Safety Approval |
Yes (RRL) |
Korea |
|
Safety certification |
IRAM Approval |
Yes |
Argentina |
|
Electronic emission control |
CCC Approval for Switching Power Supply |
Yes (IRAM) |
China |
|
Certification |
Region |
Regulatory |
Standard |
Certificate No. and Report No. | |
|
Safety |
Worldwide |
CB |
IEC60950-1:2005+A1 |
Certificate Numbers |
JPTUV-053187-M2 JPTUV-053211-A1 PTUV-048773-M1 |
|
Report Numbers |
12030097 12030890 12028263 | ||||
|
Photo Documentation Numbers |
12030097 12030890 12028263 | ||||
|
North America |
cTUVus |
UL60950-1:2007 CAN/CSA-C22.2 No.60950-1-07+A1 |
Test Report No. Certificate Numbers |
USA-JT 12030098 CU72133020 CU72133022 CU72120935 | |
|
European Union |
TUV |
+A11+A1+A12 |
Certificate Numbers |
S1-50266086 S1-50266254 S1-50245594 | |
|
Argentina |
IRAM |
IEC60950-1:2005+A1 |
Certificate Numbers |
RA3385104E,204E,205E RA3385103E,202E,203E RA3283003E | |
|
Safety EMC |
Russia |
EAC |
TP TC 004/2011 TP TC 020/2011 |
Certificate Numbers |
RA3283003E RU C-JP.AR46.B.60400 RU C-JP.AR46.B.60634 |
|
North America |
FCC |
FCC Part15 Subpart B Class A EICES-003 Issue:2012 Class A |
Test Report No. |
10033930S-C 10057416S-C 10162445S-D | |
|
European Union |
EN |
EEN55022:2010 EEN55024:2010 EEN61000-3-2:2006 +A1+A2 EEN61000-3-3:2008 |
Certificate No. Test Report Numbers |
CJ50268193 12030583-001 12030583-003 12030583-004 | |
|
EMC |
Australia and New Zealand |
C-Tick RCM |
AS/NZS CISPR 22:2009+A1 Class A |
Test Report Numbers |
10033930S-B 10057416S-B 10162445S-C |
|
Taiwan |
BSMI |
CNS13429¥CNS14336-1 |
Declaration of Conformity |
Declaration of Conformity | |
|
South Korea |
KCC |
KN22KN24 |
Certificate No. |
MSIP-REM-HTB-DKC810 | |
|
Region |
Regulatory |
Standard |
Model |
Certificate No. | |
|
Safety EMC |
China |
CCC |
GB4943-2011GB9254-2008GB17625.1-2003 |
SBX/UBX_SWPSTDPS-600FB XX |
2011010907455767 |
|
FBX_SWPSPPD6001 |
2012010907575263 | ||||
US FCC Notice
FCC Notice
Federal Communications Commission
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case users will be required to correct the interference at their own expense.
Electronic emissions testing
EMI testing was conducted with shielded cables. To comply with the FCC regulations, you must use shielded cables with your installation.
The EMI tests were performed with the following configurations:
DKC810I-CBX+DKC+F810I-SBX
DKC810I-CBX+DKC+F810I-SBX+DKC-F810I-UBX
Copies of the Underwriters Laboratories EMI compliance certificates are located at the end of this chapter.
If trouble occurs in another configuration, a user may be requested to take appropriate preventive measures.
European Declaration of Conformity
| Warning This equipment complies with the requirements relating to electromagnetic compatibility, EN 55022 class A for ITE, the essential protection requirement of Council Directive 89/336/EEC on the approximation of the laws of the Member States relating to electromagnetic compatibility. |
"EINE LEICHT ZUGÄNGLICHE TRENN-VORRICHTUNG, MIT EINER KONTAKT-ÖFFNUNGSWEITE VON MINDESTENS 3mm IST IN DER UNMITTELBAREN NÄHE DER VERBRAUCHERANLAGE ANZUORDEN (4-POLIGE ABSCHALTUNG)."
Maschinen lärm informations verordnung 3. GSGV, 18.01.1991: Der "höchste" Schalldruckpegel beträt 70 db (A) oder weniger gemäß ISO 7779
CLASS 1 LASER PRODUCT
Notice of export controls
Export of technical data contained in this document may require an export license from the United States government and/or the government of Japan. Contact the Hitachi Legal Department for any export compliance questions.
China RoHS
| This symbol displays requirements for controlling pollution caused by electronic information products. |
Hazardous and toxic substances
|
Toxic and hazardous substances and elements | ||||||
|
Unit |
Lead (PB) |
Mercury (Hg) |
Cadmium (Cd) |
Hexavalent Chronium (Cr (VI)) |
Polybrominated biphenyls (PBB) |
Polybrominated diphenyl ethers (PBDE) |
|
Controller chassis |
X |
O |
O |
O |
O |
O |
|
Drive chassis |
X |
O |
O |
O |
O |
O |
|
The Symbol O indicates that this toxic or hazardous substances contained in all of the homogeneous materials used for this part is below this limit requirement in SJ/T 11363-2006. The symbol X indicates that this toxic or hazardous substances contained in at least one of the homogeneous materials used for this part is above the limit requirement in SJ/T 11363-2006. | ||||||
Disposal
| Note: This symbol on the product or on its packaging means that your electrical and electronic equipment should be disposed at the end of life separately from household wastes. There are separate collection systems for recycling EU and many cities in the USA. For more information, contact the local authority or the dealer where you purchased the product. |
Recycling
| The cache backup battery unit includes a nickel-hydride battery. A nickel-hydride battery should be recycled when it is no longer usable. When you replace the battery unit, do not dispose of the old one in the trash. Recycle the battery instead. The mark posted on the battery unit is a three-arrow mark that means a recyclable part. |
FIPS 140-2 Consolidated Validation Certificate
The encrypting back-end director received FIPS 140-2 certification from the National Institute of Standards and Technology. For more information about security and encryption, contact your Hitachi Vantara sales representative.
