Audit Log Quick reference
You can use the audit log quick reference to indicate what each log function represents.
Audit Log Functions
The following table lists the functions used in audit logging and provides their meanings.
Function name |
Description |
ACM |
Audit log functions used for account management |
AuditLog |
Audit log functions used during audit logging |
BASE |
Audit log functions used during initial setup |
CPAV |
Audit log functions used during Compatible PAV operations |
|
Audit log functions used during E-Mail notification operations |
Information |
Audit log functions used during log related operations on SVP |
Install |
Audit log functions used during software or firmware installation |
Local Replications |
Audit Log functions used during local replication operations |
Maintenance |
Audit log functions used during general maintenance |
Monitor |
Audit log functions used to monitor process |
PFM |
Audit log functions used to monitor performance |
PP KEY |
Audit log functions used to install or enable a license key |
PROV |
Audit log functions used to provision the system |
Remote Maintenance |
Audit log functions used for Remote Maintenance application |
Remote Replications |
Audit log functions used during remote replication operations |
SNMP |
Audit log functions used during SNMP Agent operations |
SPM |
Audit log functions used during Server Priority Manager operations |
Spreadsheet |
Audit log functions used during External API operations |
UVM |
Audit log functions used during Universal Volume Manager operations |
VM |
Audit log functions used during Volume Migration operations |
VPM |
Audit log functions used during Virtual Partition Manager operations |
VS |
Audit log functions used during volume shredding operations |
Device Manager - Storage Navigator and SVP operation
The storage system logs operations performed from Device Manager - Storage Navigator computer or SVP. The following table lists the function/operation names as well as GUI operations that trigger logging. Functions are listed in alphabetical order.
Function Name |
Operation Name |
Corresponding GUI Operation |
AuditLog |
Send Test Message |
Sending the test log to the syslog server in the Edit Audit Log Settings window |
AuditLog |
Set FTP Server |
Changing settings in the Edit Audit Log Settings window |
AuditLog |
Set Syslog Server |
Changing settings in the Edit Audit Log Settings window |
AuditLog |
SIM Complete |
SIM complete in the Edit Audit Log Settings window |
ACM |
AddUsersToUserGroup |
Adding a user account to a user group |
ACM |
UpdateUserGroupAllResourceGrp |
Changing the setting of all resource groups assignment for a user group |
ACM |
UpdateUserGroupResourceGrpBmp |
Changing the resource group allocation of a user group |
ACM |
UpdateUserGroupRole |
Changing the role allocation of a user group |
ACM |
UpdatePassword |
Changing a password |
ACM |
CreateUser |
Creating a new user account |
ACM |
CreateUserGroup |
Creating a new user group |
ACM |
DeleteUserGroups |
Deleting a user group |
ACM |
DeleteUsers |
Deleting a user account |
ACM |
DisableUsers |
Disabling a user account |
ACM |
UpdateUserAuthentication |
Changing settings of a user account |
ACM |
UpdateUserGroupName |
Changing the name of a user group |
ACM |
EnableUsers |
Enabling a user account |
ACM |
Release Lockout |
Releasing a user account from lockout |
ACM |
RemoveUsersFromUserGroup |
Removing a user from a user group |
ACM |
Set Login Message |
Setting login message |
ACM |
Setup Server |
Setting a server for the View External Authentication Server Properties |
BASE |
Advanced Settings |
Editing advanced system settings |
BASE |
Certificate Update |
Changing settings in the Update Certificate Files window |
BASE |
Control Panel Backup |
Backing up the configuration files using Control Panel |
BASE |
Control Panel Restore |
Restoring the configuration files using Control Panel |
BASE |
Create Conf Report |
Creating a configuration report |
BASE |
Delete CVAE Info |
Changing information from Hitachi Command Suite |
BASE |
Delete Reports |
Deleting a configuration report |
BASE |
Delete Tasks |
Deleting a task |
BASE |
Disable Auto Delete |
Disabling Task Auto Delete function |
BASE |
Edit Alert Setting |
Setting a destination of the alert |
BASE |
Edit SIM Syslog Serv |
Settings of SIM Syslog notification |
BASE |
Edit Storage System |
Editing storage system information |
BASE |
Enable Auto Delete |
Enabling Task Auto Delete function |
BASE |
Entry Tasks |
Applying a task to the storage system |
BASE |
Forcibly Disable SVP |
Blocking the SVP forcibly |
BASE |
Forcibly Fail Over SVP |
Failing over the SVP forcibly |
BASE |
HCSSO Authentication |
Launching Device Manager - Storage Navigator from Hitachi Command Suite |
BASE |
HCSSO SetOneTimeKey |
Issuing OneTimeKey from Hitachi Command Suite |
BASE |
Login |
Log in to Device Manager - Storage Navigator or SVP |
BASE |
Logout |
Log out from Device Manager - Storage Navigator or SVP |
BASE |
Release HTTP Block |
Changing settings on the Release HTTP Blocking window |
BASE |
Resume Tasks |
Resuming a task |
BASE |
Set CVAE Info |
Changing information from Hitachi Command Suite |
BASE |
Set Up HTTP Block |
Changing settings on the Set Up HTTP Blocking window |
BASE |
Suspend Tasks |
Suspending a task |
BASE |
Unlock Forcibly |
Cancelling lock forcibly |
BASE |
Update HCS Crt |
Registering or deleting a certificate for Hitachi Command Suite |
CPAV |
Add Alias Delete Alias |
Compatible PAV |
|
MailAddress Write Valid Flag Update |
Settings of E-Mail notification |
Information |
Delete Log ORM Value SIM Complete SIM Reporting Option Threshold Value |
Log-related operation on Service Processor (SVP) |
Install |
All Config |
Maintenance on SVP |
Install |
Backup Config |
Maintenance on SVP |
Install |
Dku Emulation |
Maintenance on SVP |
Install |
FlashDrive ORM Value |
Maintenance on SVP |
Install |
Initialize ORM Value |
Maintenance on SVP |
Install |
Machine Install Date |
Maintenance on SVP |
Install |
Micro Program |
Maintenance on SVP |
Install |
NEW Installation |
Maintenance on SVP |
Install |
Restore Config |
Maintenance on SVP |
Install |
Set Battery Life |
Maintenance on SVP |
Install |
Set IP Address |
Maintenance on SVP |
Install |
Set Subsystem Time |
Maintenance on SVP |
Install |
System Option |
Maintenance on SVP |
Install |
System Tuning |
Maintenance on SVP |
Local Replication |
Assign S-VOLs |
Assigning secondary volumes of Thin Image pairs |
Local Replication |
Create Pairs |
Creating pairs for ShadowImage, ShadowImage for Mainframe, or Thin Image |
Local Replication |
Delete Pairs |
Deleting pairs for ShadowImage, ShadowImage for Mainframe, or Thin Image |
Local Replication |
Edit Options |
Editing options for ShadowImage or ShadowImage for Mainframe |
Local Replication |
Initialize |
Initializing pairs for ShadowImage and ShadowImage for Mainframe |
Local Replication |
Release Reserved CTG |
Releasing reserved consistency groups for ShadowImage for Mainframe |
Local Replication |
Remove S-VOLs |
Removing secondary volumes of Thin Image pairs |
Local Replication |
Reserve CTG |
Reserving consistency groups for ShadowImage for Mainframe |
Local Replication |
Resync Pairs |
Resynchronizing pairs for ShadowImage, ShadowImage for Mainframe, or Thin Image |
Local Replication |
Split Pairs |
Splitting pairs for ShadowImage, ShadowImage for Mainframe, or Thin Image |
Local Replication |
Suspend Pairs |
Suspending pairs for ShadowImage or ShadowImage for Mainframe |
Maintenance |
Block |
Maintenance from the Maintenance Utility menu |
Maintenance |
Block(Remove) |
Maintenance from the Maintenance Utility menu |
Maintenance |
Block(Type Change) |
Maintenance from the Maintenance Utility menu |
Maintenance |
Boot System SafeMode |
Maintenance from the Maintenance Utility menu |
Maintenance |
Change SFP Type |
Maintenance from the Maintenance Utility menu |
Maintenance |
Check Remove |
Maintenance from the Maintenance Utility menu |
Maintenance |
DMA Restore |
Maintenance on SVP |
Maintenance |
Drive Interrupt |
Maintenance on SVP |
Maintenance |
DRR Restore |
Maintenance on SVP |
Maintenance |
Edit System Param |
Maintenance from the Maintenance Utility menu |
Maintenance |
Force Rls SysLock |
Maintenance from the Maintenance Utility menu |
Maintenance |
Install |
Maintenance from the Maintenance Utility menu |
Maintenance |
MP Restore |
Maintenance on SVP |
Maintenance |
Reboot GUM |
Maintenance from the Maintenance Utility menu |
Maintenance |
Remove |
Maintenance from the Maintenance Utility menu |
Maintenance |
Replace |
Maintenance on SVP |
Maintenance |
Rest HUB |
Maintenance from the Maintenance Utility menu |
Maintenance |
Restore | Maintenance from the Maintenance Utility menu and maintenance on SVP |
Maintenance |
Restore(Remove) |
Maintenance from the Maintenance Utility menu |
Maintenance |
Restore(Type Change) |
Maintenance from the Maintenance Utility menu |
Maintenance |
Set Battery Life |
Maintenance on SVP |
Maintenance |
Size Change |
Maintenance on SVP |
Maintenance |
Stop Copy |
Maintenance from the Maintenance Utility menu |
Maintenance |
Switch SVP |
Maintenance on SVP |
Maintenance |
Transfer Config |
Maintenance on SVP |
Maintenance |
Turn Off Locate LEDs |
Maintenance from the Maintenance Utility menu |
Maintenance |
Turn On Locate LEDs |
Maintenance from the Maintenance Utility menu |
Monitor |
Threshold |
Maintenance on SVP |
PFM |
Delete Unused WWNs |
Performance Monitor |
PFM |
Edit CU Monitor Mode |
Performance Monitor |
PFM |
Edit Monitoring SW |
Performance Monitor |
PFM |
Edit WWN |
Performance Monitor |
PFM |
Edit WWN MonitorMode |
Performance Monitor |
PP KEY |
Enable Licenses Install Licenses Remove Licenses Update License Status |
License Key |
PROV |
Add Hosts |
|
PROV |
Add LUN Paths |
|
PROV |
Assign MP Unit |
Assigning an MP unit |
PROV |
Block LDEVs |
Blocking LDEVs |
PROV |
CalculateTieringMonitorData |
Recalculating tier monitoring data from Hitachi Command Suite |
PROV |
Complete SIMs |
Completing SIMs related to a pool |
PROV |
Create Host Groups |
Creating a host group |
PROV |
Create LDEVs |
|
PROV |
Create Resource Grps |
Creating a resource group |
PROV |
Create VDKC-Box |
Creating a VDKC-Box from Hitachi Command Suite |
PROV |
Create/Expand Pools |
|
PROV |
CreateAlus |
Creating an LDEV with the ALU attribute |
PROV |
CreateiScsiName |
Adding hosts to selected iSCSI targets |
PROV |
CreateiScsiPath |
|
PROV |
CreateiScsiTarget |
Creating iSCSI targets |
PROV |
CreateParityGroups |
Creating parity groups |
PROV |
CreateRemoteChapUser |
Adding CHAP users to selected iSCSI targets |
PROV |
CreateSlus |
Creating an LDEV with the SLU attribute from Hitachi Command Suite |
PROV |
CreateTiPairsWithSlu |
Creating Thin Image pairs using LDEVs with the SLU attribute from Hitachi Command Suite |
PROV |
CreateTiVolumes |
Creating a secondary volume for Thin Image from Hitachi Command Suite |
PROV |
Delete Host Groups |
Deleting a host group |
PROV |
Delete LDEVs |
|
PROV |
Delete Login WWNs |
Deleting an unnecessary WWN |
PROV |
Delete LUN Paths |
Removing a LUN path from an LDEV |
PROV |
Delete Resource Grps |
Deleting a resource group |
PROV |
Delete VDKC-Box |
Deleting a VDKC-Box from Hitachi Command Suite |
PROV |
DeleteAlus |
Deleting an LDEV with the ALU attribute |
PROV |
DeleteiScsiInitiatorUser |
Deleting the setting information of users with CHAP authentication on ports |
PROV |
DeleteiScsiName |
Removing hosts from selected iSCSI targets |
PROV |
DeleteiScsiPath |
|
PROV |
DeleteiScsiTarget |
Deleting iSCSI targets |
PROV |
DeleteLoginiScsiName |
Deleting unnecessary iSCSI names |
PROV |
DeleteParityGroups |
Deleting parity groups |
PROV |
DeleteRemoteChapUser |
Removing CHAP users from selected iSCSI targets |
PROV |
DeleteSlus |
Deleting an LDEV with the SLU attribute from Hitachi Command Suite |
PROV |
DeleteTargetChapUser |
Removing CHAP users assigned to iSCSI targets |
PROV |
DeleteTiVolumes |
Deleting a secondary volume for Thin Image from Hitachi Command Suite |
PROV |
DRU Expiration Lock |
Data Retention Utility |
PROV |
Edit Cmd Dev(Auth) |
Editing the user authentication setting for a command device |
PROV |
Edit Cmd Dev(DevGrp) |
Editing the device group setting for a command device |
PROV |
Edit Cmd Dev(Sec) |
Editing the command device security setting |
PROV |
Edit Command Devices |
Enabling or disabling the command device setting |
PROV |
Edit DRU Attribute |
Data Retention Utility |
PROV |
Edit Full Allocation |
Enabling or disabling the Full Allocation setting |
PROV |
Edit Host |
Editing host settings |
PROV |
Edit Host Grps(Mode) |
Editing host group settings |
PROV |
Edit Host Grps(Name) |
Editing host group settings |
PROV |
Edit LDEVs(tier) |
Relocating tier |
PROV |
Edit LDEV Tier Rank |
Editing the external LDEV tier ranks of pool volumes assigned to a pool |
PROV |
Edit MP Units |
Editing the MP unit setting |
PROV |
Edit Ports(Address) |
Editing a port address |
PROV |
Edit Ports(Attr) |
Changing a port attribute with TrueCopy, TrueCopy for Mainframe, Universal Replicator, Universal Replicator for Mainframe, Universal Volume Manager. |
PROV |
Edit Ports(Security) |
Editing LUN security setting for a port |
PROV |
Edit Ports(Speed) |
Editing the data transfer speed of a port |
PROV |
Edit Ports(Topology) |
Editing the topology setting of a port |
PROV |
Edit Resource Grp |
Editing a resource group |
PROV |
Edit SCP Time |
Setting a SCP (State Change Pending) time to the mainframe host |
PROV |
Edit Tiering Policy |
Editing the tiering policy |
PROV |
Edit VR Attribute |
Volume Retention Manager |
PROV |
Edit V-VOL Option |
|
PROV |
Edit/Delete Pools |
|
PROV |
Edit/Delete UUIDs |
|
PROV |
EditiScsiInitiatorUser |
Editing the setting information of users with CHAP authentication on ports |
PROV |
EditiScsiName |
Editing host settings |
PROV |
EditiScsiNickName |
Editing host settings |
PROV |
EditiScsiTarget |
Editing iSCSI target settings |
PROV |
EditiSNS |
Editing port settings |
PROV |
EditPortInfo |
Editing port settings |
PROV |
EditRemoteChapUser |
Editing CHAP user settings |
PROV |
EditRemoteTargetUser |
Editing iSCSI targets |
PROV |
EditT10piMode |
Editing T10 PI mode settings on ports |
PROV |
EditTargetChapUser |
Editing settings of CHAP users assigned to iSCSI targets |
PROV |
ExecBindingOperation |
Binding or unbinding an LDEV with the SLU attribute to or from the LDEV with the ALU attribute |
PROV |
Expand V-VOLs |
Increasing virtual volume capacity |
PROV |
ExpandSlus |
Increasing capacity of an LDEV with the SLU attribute from Hitachi Command Suite |
PROV |
Force Del MF V-VOLs |
Forcibly deleting a V-Vol for Dynamic Provisioning for Mainframe, Dynamic Tiering for Mainframe, or active flash for mainframe |
PROV |
Format LDEVs |
Formatting an LDEV |
PROV |
Format LDEVs(H) |
Formatting a LDEV using the Write to Control Blocks function |
PROV |
Format LDEVs(Q) |
Quick formatting an LDEV |
PROV |
Initialize Pools |
Initializing a pool |
PROV |
LDEV Name |
|
PROV |
LdevsFenceForceRelease |
Releasing the Mainframe Soft Fence/SPID Fence status forcibly |
PROV |
MapSecondaryVolumeWithSlu |
Mapping LDEVs with the SLU attribute to the secondary volumes of Thin Image pairs from Hitachi Command Suite |
PROV |
Monitor Pools |
Starting the performance monitoring of a pool |
PROV |
Move Resources |
|
PROV |
OperateSiPairsWithSlu |
Operating ShadowImage pairs using LDEVs with the SLU attribute from Hitachi Command Suite |
PROV |
OperateTiPairsWithSlu |
Operating Thin Image pairs using LDEVs with the SLU attribute from Hitachi Command Suite |
PROV |
Pool Name |
|
PROV |
Reclaim Zero Pages |
Releasing pages in a virtual volume |
PROV |
Release HostReserved |
Releasing Host-Reserved LUNs |
PROV |
Relocate Pool |
Starting the tier relocation of a pool |
PROV |
Remove Hosts |
Removing a host from a host group |
PROV |
Restore LDEVs |
Restoring an LDEV |
PROV |
Restore Pools |
Restoring a pool |
PROV |
RevertTiPairsWithSlu |
Reverting Thin Image pairs using LDEVs with the SLU attribute from Hitachi Command Suite |
PROV |
Set PageTieringLevel |
Setting a tiering policy in pages |
PROV |
Set SSID |
|
PROV |
Set Virtual LDEV |
|
PROV |
Shrink Pool |
Decreasing pool capacity |
PROV |
StartParityGroupsFormat |
Formatting a parity group |
PROV |
StopFormat |
Interrupting the format task for a parity group |
PROV |
Stop Monitoring |
Stopping the performance monitoring of a pool |
PROV |
Stop Reclm ZeroPages |
Stop releasing pages in a virtual volume |
PROV |
Stop Relocating |
Stopping the tier relocation of a pool |
PROV |
Stop Shrinking Pool |
Stop decreasing pool capacity |
PROV |
UnmapSecondaryVolumeWithSlu |
Unmapping the secondary volumes of Thin Image pairs using LDEVs with the SLU attribute from Hitachi Command Suite |
PROV |
UpdateAluaMode |
|
PROV |
UpdateAsymmetricAccessStatePerHG |
Editing Asymmetric Access States settings |
PROV |
UpdateMFSystemFunctions |
Changing settings of the Mainframe System Function |
PROV |
UpdateParityGroupSettings |
Enabling or disabling accelerated compression |
PROV |
UpdateSpareDrives |
Assigning or releasing the assignment of a spare drive |
PROV |
VTOC |
Volume Retention Manager |
Remote Maintenance |
Micro Program PS Control Reboot MP Reboot Port Reboot SVP StartVerify StopVerify Switch SVP Transfer Config |
Hitachi Remote Ops |
Remote Replication |
Add Path |
Adding paths for TrueCopy, TrueCopy for Mainframe, Universal Replicator, and Universal Replicator for Mainframe on the remote storage system. |
Remote Replication |
Add Quorum Disk ID |
Adding quorum disk IDs used by global-active device. |
Remote Replication |
Add RCU |
Adding remote storage system settings for TrueCopy, TrueCopy for Mainframe, Universal Replicator, and Universal Replicator for Mainframe. |
Remote Replication |
Change JNL Option |
Changing the journal option for Universal Replicator and Universal Replicator for Mainframe. |
Remote Replication |
Change Mirror Option |
Changing the mirror option for Universal Replicator and Universal Replicator for Mainframe. |
Remote Replication |
Change RCU Option |
Changing the remote storage system option for TrueCopy, TrueCopy for Mainframe, Universal Replicator, and Universal Replicator for Mainframe. |
Remote Replication |
Clear SIM |
Clearing SIMs for TrueCopy for Mainframe, Universal Replicator for Mainframe, and global-active device. |
Remote Replication |
Create Pairs |
Creating pairs for TrueCopy, TrueCopy for Mainframe, Universal Replicator, Universal Replicator for Mainframe, and global-active device. |
Remote Replication |
Delete Cmd.Dev |
Deleting a command device for TrueCopy for Mainframe. |
Remote Replication |
Delete Pairs |
Deleting pairs for TrueCopy, TrueCopy for Mainframe, Universal Replicator, Universal Replicator for Mainframe, and global-active device. |
Remote Replication |
Delete Path |
Deleting paths for TrueCopy, TrueCopy for Mainframe, Universal Replicator, and Universal Replicator for Mainframe on the remote storage system. |
Remote Replication |
Del Quorum Disk ID |
Deleting quorum disk IDs used by global-active device. |
Remote Replication |
Delete RCU |
Deleting the remote storage system setting for TrueCopy, TrueCopy for Mainframe, Universal Replicator, and Universal Replicator for Mainframe. |
Remote Replication |
Edit EXCTG |
Creating and deleting journals on expanded consistency groups for Universal Replicator for Mainframe |
Remote Replication |
Edit Options |
Setting the remote replica options for TrueCopy, TrueCopy for Mainframe, Universal Replicator, Universal Replicator for Mainframe, and global-active device. |
Remote Replication |
Edit Pair Options |
Setting pair options for TrueCopy, TrueCopy for Mainframe, Universal Replicator, and Universal Replicator for Mainframe. |
Remote Replication |
Journal Owner |
Setting the journal ownership for Universal Replicator and Universal Replicator for Mainframe. |
Remote Replication |
Journal Vol |
Creating or deleting of journal or assigning journal volumes for Universal Replicator and Universal Replicator for Mainframe. Forcibly removing journals from expanded consistency groups for Universal Replicator for Mainframe |
Remote Replication |
R-Cmd.Dev. |
Setting a remote command device for Universal Replicator and Universal Replicator for Mainframe. |
Remote Replication |
Resync Pairs |
Resynchronizing pairs for TrueCopy, TrueCopy for Mainframe, Universal Replicator, Universal Replicator for Mainframe, and global-active device. |
Remote Replication |
Split Pairs |
Split pairs for TrueCopy, TrueCopy for Mainframe, Universal Replicator, and Universal Replicator for Mainframe. |
Remote Replication |
Suspend Pairs |
Suspending pairs for global-active device. |
Remote Replication |
UpdateQuorumDisks |
Editing the value of Read Response Guaranteed Time When Quorum monitoring has stopped for global-active device. |
SNMP |
UpdateSnmpSetting |
Setting information related to SNMP |
SPM |
Change SPMGrp Clear SPM Info Default Set Set All Prio Port Set All Prio WWN Set Ctrl Kind Set Prio Port Set Prio WWN SPMGrp Del/Chg Update Port WWN Update SPMGrp Update WWN |
Server Priority Manager |
Spreadsheet |
CflSet End CflSet Start |
Performing the CFLSET command using External API |
UVM |
Add External Volumes |
Mapping an external volume |
UVM |
Assign MP Blade |
Assigning an MP blade for an external volume |
UVM |
Delete ES VOLs |
Releasing external volume mapping |
UVM |
Disconnect ES Paths |
Disconnecting an external path |
UVM |
Disconnect ES VOLs |
Disconnecting an external storage system or an external volume |
UVM |
Edit ES Path Config |
|
UVM |
Edit ES VOLs |
Editing external volume settings |
UVM |
Edit External WWNs / iSCSI Targets |
|
UVM |
ProfileUpgrade |
Operable by tool only |
UVM |
Reconnect ES Paths |
Reconnecting an external path |
UVM |
Reconnect ES VOLs |
Reconnecting an external storage system or external volume |
VM |
Delete All Histories Del Migration Plans Migrate Volumes |
Volume Migration |
VPM |
Edit CLPR |
Creating, adding, deleting, or editing CLPR Migrating parity groups to a different CLPR |
VS |
Abort Shredding |
Aborting shredding an LDEV |
VS |
End Shredding |
Ending shredding an LDEV |
VS |
Shred LDEVs |
Shredding an LDEV |
Encryption Key operation
The following tables show the function names, operation names and event names of encryption keys for data encryption and each item is listed in alphabetical order. The logs for the operation names listed in the first table are output to Auditlog information file 1, while the logs for the event names listed in the second table are output to Auditlog information file 2.
Function Name | Operation Name | Corresponding GUI Operation |
ENC | Add keys to DKC | Creating encryption keys Configuring encryption environment settings |
Backup Keys | Backing up encryption keys on the key management server or backing up encryption keys as a file on the Device Manager - Storage Navigator PC | |
Backup Keys to File | Backing up encryption keys as a file on the Device Manager - Storage Navigator PC | |
Backup Keys to Serv | Backing up encryption keys on the key management server | |
Create KEK Dynamic | Configuring encryption environment settings Updating key encryption keys | |
Create Keys | Creating encryption keys Configuring encryption environment settings | |
Create Keys On Serv | Creating encryption keys Backing up encryption keys on the key management server Configuring encryption environment settings | |
Delete KEK Dynamic | Configuring encryption environment settings Updating key encryption keys | |
Delete Keys | Deleting encryption keys | |
Delete Keys on Serv | Deleting encryption keys backed up on the key management server | |
DEK assign SpareDisk | Configuring encryption environment settings | |
DEK delete | Configuring encryption environment settings | |
Edit Encryption | Enabling/disabling the encryption in a parity group level | |
Edit ENC Settings | Configuring encryption environment settings | |
Edit Password Policy | Editing password policies for backing up encryption keys | |
Register KEK Dynamic | Configuring encryption environment settings Updating key encryption keys | |
Rekey CEK | Configuring encryption environment settings Updating certificate encryption keys | |
Rekey KEK Dynamic | Updating key encryption keys | |
Restore Keys | Restoring encryption keys from back up copies on the key management server or the Device Manager - Storage Navigator PC | |
Restore Keys fr File | Restoring encryption keys from back up copies on the Device Manager - Storage Navigator PC | |
Restore Keys fr Serv | Restoring encryption keys from back up copies on the key management server | |
Retry KEK Dynamic | Reacquisition of key encryption keys | |
Set Up Key Mng Serv | Configuring encryption environment settings | |
KEK Acquisition |
Acquisition Key |
Reacquisition of key encryption keys |
Set Key |
Function Name | Event Name | Output Trigger |
ENC | Change CEK Status |
|
Change DEK Status |
| |
Clear Keys | When the encryption environment setting is initialized. | |
Create Keys | When the encryption key is created. | |
Delete Keys | When the encryption key is deleted. | |
Use Keys for CEK/KEK |
|
Command sent from the host
The following table describes the function name output to the audit log file when receiving commands from the host.
A CCI command does not always correspond to a command that is output by the audit logs.
Function Name | Description |
Config Command | Indicates that a configuration command was received. Not indicate the completion of the operation. |
FC-SP | Indicates that the FC-SP authentication is completed. |
User Auth | Indicates that a user authentication command was received. Not indicate the completion of the operation. |
PIN Deletion Tool operation
The following table shows the function name and the operation name concerning the PIN Deletion Tool.
Function Name | Operation Name | Corresponding GUI Operation |
PINDeletion | Delete | PIN deletion operation by PIN deletion tool |
Audit log reproduced output
The following table describes the operation name, event name, and triggering events that are output when the audit log file is reproduced. The "create file" event name will be automatically output only once.
Function Name | Event Name | Output Trigger |
AuditLog | Create File | Output when abnormal files in the audit log are reproduced automatically. |
Audit log lost output
The following table shows the function name and the event name that are output when the audit log by the commands that the storage system accepted from the host has been lost. The "DKCAuditLog was lost" event name will be automatically output only once for each output trigger.
Function Name | Event Name | Output Trigger |
AuditLog | DKCAuditLog was lost | Output when the audit log by the commands that the storage system accepted from the host has been lost. |