Skip to main content
Close

We've Moved!

Product Documentation has moved to docs.hitachivantara.com
Hitachi Vantara Knowledge

Recovering from power stand-by

  1. Last updated
  2. Save as PDF

When the server is in a power stand-by state, the power supplies are powered and the PSU LEDs are lit, but the Power Status LED on the rear panel is not.

The server enters a stand-by power state due to any the following conditions:

  • The shutdown --powerdown command has been issued.
  • The PWR button is pressed when the server is running.
  • The server has shut down automatically due to an over-temperature condition.
You can restore the server to its normal power state by either of the following methods:

  • Press the PWR button.
  • Remove the power cables from both PSUs, wait for 10 seconds, then reconnect the cables to the PSUs.
Parent Topic