Configuring server identification

Procedure

1. Navigate to Home Server Settings Server Identification.

   

   Field/Item	Description
   Server Name	Enter a name for the system. On a cluster, this is also the cluster name and all cluster nodes are automatically renamed by appending the node ID to the cluster name. For example, if the cluster is named 'NASCluster,' node 1 will be automatically be renamed 'NASCluster-01'. NoteWhen you change the name of the server, the new name will not appear on the Server Status Console (on the Home page) until after the server is restarted.
   Location	Enter the address of the building in which the server is installed.
   Contact	Enter the contact information for the person who is the primarily responsible for maintaining the server.
   apply	Saves the identification settings.

2. Enter the requested information

3. Click apply to save the settings.

Parent Topic

• Server and Cluster Administration Guide

  This guide provides information about administering servers, clusters, and server farms. Includes information about licensing, name spaces, upgrading firmware, monitoring servers and clusters, the backing up and restoring configurations.