Specifying an NDMP user name and password
Procedure
Navigate to NDMP Configuration page.
to display theEnter the required information NDMP settings:
Field/Item Description NDMP Settings User Name The user name cannot be more than 20 characters long and cannot contain the following characters: \ / < > " ' Password By default, the password is ʺndmpʺ. The password cannot be more than 20 characters long. Version By default, the storage server uses NDMP version 4 for NDMP backup and recovery; if required, it can be configured for version 2 or 3 of the NDMP protocol. NoteBoth incremental data replication and ADC require NDMP version 3 or 4. Set NDMP to version 2 only if required by your backup software.Port The NDMP port number. By default, port 10000 is used. apply Apply the changes made to the NDMP Settings. NDMP Server Status Current Status: The options are: - start - Enable NDMP server.
- stop - Disable NDMP server and terminate any NDMP operations in progress.
Enable NDMP Server At Boot: The options are: - enable - Enable NDMP server at boot time.
- disable - Disable NDMP server at boot time.
Click Apply to save your changes.