Skip to main content

We've Moved!

Product Documentation has moved to docs.hitachivantara.com
Hitachi Vantara Knowledge

Powering down the server

Follow this procedure whenever a server is about to be powered down for shipment or storage, and will be left off for more than a day. If the system is being restarted or power-cycled, this procedure is not required.

Contact your representative for special instructions if servers will be in storage for more than one year.

Procedure

  1. From the NAS Platform operating system console, enter the command: shutdown --powerdown

  2. Wait until the rear panel LEDs turn off.

    NoteThe PSUs continue to run and the PSU LEDs stay on.
  3. Power down the server by removing the power cables from the PSU modules.