Bezel removal

The server bezel is held onto the server chassis through a friction fit onto four retention posts, which are mounted to the chassis along the left and right edges of the chassis. There are no screws or other fasteners.

Procedure

1. To remove the bezel, grasp the front of the bezel by the grasping areas.

2. Gently pull the bezel straight out away from the server.

Parent Topic

• 3080 and 3090 G1 Hardware Reference

  Overview of the Hitachi NAS Platform. The 3080 and 3090 G1 hardware reference explains how to configure the hardware and software, and how to replace faulty components.