NAS Platform System Installation Guide Last updated Save as PDF Guides you through the installation process, one phase at a time, with checkpoints. Child TopicsSystem requirementsVerifying your system componentsAssembling the physical layerAssembling the physical layer is identifying and installing the hardware components for the system. Configuring the logical layerAccepting your systemUpgrading storage array firmwareThis task describes the procedure for upgrading the firmware on the storage arrays. The steps are performed in the system graphical user interface (GUI). Configuring the superflush settingsAfter creating volumes on the storage, configure the superflush settings. Upgrading operating systemsUpgrading server firmwareRunning the NAS-PRECONFIG scriptThis section describes the procedure for running the nas-preconfig script. This script automates some required configuration steps. Using a virtual SMUUpgrading an external SMURunning the SMU-CONFIG scriptAdding nodes to an N-way cluster (HNAS server only)