Skip to main content
Hitachi Vantara Knowledge

Managing the Replication Verification service

You can set the Replication Verification service to run once or to run continuously, or you can disable the service so that it doesn't run at all.

Procedure

  1. In the top-level menu of the HCP System Management Console, select Services Replication.

  2. On the left side of the Replication page, click Settings.

  3. On the replication Settings page, take one of these actions:

    • To run the Replication Verification service once, select Run Replication Verification service. Then select Run once.
    • To run the Replication Verification service continuously, select Run Replication Verification service. Then select Run continuously.
    • To disable the Replication Verification service, deselect Run Replication Verification service.
  4. Click Update Settings.

 

  • Was this article helpful?