Skip to main content
Outside service Partner
Hitachi Vantara Knowledge

Tenant Management Console alerts


The Tenant Management Console uses icons to report tenant and namespace status on the tenant Overview, Namespaces, and Search pages and on the namespace Overview panel. The Console also uses icons to report conflicting user accounts on the Users page. These icons, called alerts, are accompanied by text on the tenant Overview page and namespace Overview panel. On all pages on which they appear, alerts have text that’s displayed when you hover over them.

This appendix describes the alerts that can appear on the Console pages and shows the hover text for each alert. Where applicable, the appendix also tells you how to respond to the alerts.

The alerts in each table in this appendix are listed alphabetically by their hover text.

© 2015, 2019 Hitachi Vantara Corporation. All rights reserved.

Tenant Overview page alerts


Icon

Mouse-over text

Description

UsernameConflictBig.png

Conflicting user accounts

Two or more user accounts have the same username. This can happen after an upgrade if, before the upgrade occurred, a user account and a data access account (created in an HCP release earlier than 5.0) had the same username. Resolve the conflict by merging or separating the conflicting accounts on the Users page in the Tenant Management Console.

IrreparableObjects-Alert.png

Irreparable and unavailable objects

One or more of the tenant's namespaces contain irreparable objects, and one or more of the tenant's namespaces contain unavailable objects. Please contact your HCP system administrator.

To see which objects are irreparable, go to the Irreparable Objects panel for the applicable namespaces. For information on this panel, see Working with irreparable objects.

IrreparableObjects-Alert.png

Irreparable objects

One or more of the tenant's namespaces contain irreparable objects. Please contact your HCP system administrator.

To see which objects are irreparable, go to the Irreparable Objects panel for the applicable namespaces. For information on this panel, see Working with irreparable objects.

NamespaceNonReplicatingObjects.png Nonreplicating objects The namespace contains objects that are not replicating. Please contact your HCP system administrator.

SoftQuotaExceeded.png

Soft quota exceeded

The amount of storage used by all the tenant's namespaces exceeds the soft quota configured for the tenant. Consider deleting some objects from the namespaces or requesting an increase in the hard quota for the tenant.

FullFileSystem.png

Tenant has namespace-count namespace(s) configured for CIFS with authenticated access only, but CIFS authenticated access is not currently supported

One or more of the tenant's namespaces are configured for CIFS authenticated access only, but the system is not configured to support the use of authenticated CIFS. As a result, CIFS cannot be used for access to those namespaces.

Reconfigure the affected namespace(s) to support both anonymous and authenticated access with CIFS.

NamespacesWithDPL1.png

Tenant with DPL 1 namespaces that are not replicating

The tenant owns one or more namespaces that have a DPL of 1 (one) and are not being replicated. All HCP namespaces with a DPL of 1 should be replicated to ensure that the stored data is protected. If replication is not available, increase the DPL of the affected namespaces.

This alert appears only in HCP systems in which setting the DPL to one for a namespace can leave objects unprotected.

IrreparableObjects-Alert.png

Unavailable objects

One or more of the tenant's namespaces contain unavailable objects. Please contact your HCP system administrator.

© 2015, 2019 Hitachi Vantara Corporation. All rights reserved.

Namespaces page alerts


Icon

Mouse-over text

Description

ADNoSingleSignonAccess.png

AD single sign-on access disabled.

Active Directory single sign-on is currently not working with the HTTP protocol. Please contact your HCP system administrator.

AnonymousAccessSmall.png

Anonymous access allowed

One or more enabled protocols allow clients to access the namespace without presenting user credentials for authentication.

ContentClassNoIndexing.png

Content classes but no custom metadata indexing

The namespace is associated with one or more content classes, but custom metadata indexing is disabled for the namespace. The metadata query engine is not indexing content properties for objects in the namespace.

DPL1Namespace.png

DPL 1 namespace is not replicating

The namespace has a DPL of 1 (one) and is not being replicated. All HCP namespaces with a DPL of 1 should be replicated to ensure that the stored data is protected. If replication is not available, increase the namespace DPL.

This alert appears only in HCP systems in which setting the DPL to one for a namespace can leave objects unprotected.

HardQuotaExceeded.png

Hard quota exceeded

The amount of storage used by the namespace exceeds the hard quota configured for the namespace. Clients will not be able to add data to the namespace until either some existing objects are deleted or you increase the hard quota.

IrreparableObjects-TenNS.png

Namespace namespace-name has irreparable-object-count irreparable objects

The namespace contains the indicated number of irreparable objects. Please contact your HCP system administrator.

To see which objects are irreparable, go to the Irreparable Objects panel for the namespace. For information on this panel, see Working with irreparable objects.

IrreparableObjects-TenNS.png

Namespace namespace-name has irreparable-object-count irreparable objects and unavailable-object-count unavailable objects

The namespace contains the indicated number of irreparable objects and the indicated number of unavailable objects. Please contact your HCP system administrator.

To see which objects are irreparable, go to the Irreparable Objects panel for the namespace. For information on this panel, see Working with irreparable objects.

IrreparableObjects-TenNS.png

Namespace namespace-name has unavailable-object-count unavailable objects

The namespace contains the indicated number of unavailable objects. Please contact your HCP system administrator.

FullFileSystem.png

Namespace setting for CIFS authenticated access not supported by system configuration

The namespace requires authentication for CIFS-based data access. However the system is currently not configured to support the use of authenticated CIFS.

NonReplicatingObjects.png Nonreplicating objects The namespace contains objects that are not replicating. Please contact your HCP system administrator.

SoftQuotaExceeded.png

Soft quota exceeded

The amount of storage used by the namespace exceeds the soft quota configured for the namespace. Consider deleting some objects from the namespace or increasing its hard quota.

VersioningAppendableSmall.png

Versioning without REST API

The namespace has versioning enabled, but the REST API is not enabled. Versioning works only with the REST API.

© 2015, 2019 Hitachi Vantara Corporation. All rights reserved.

Namespaces Overview panel alerts


Icon

Mouse-over text

Description

AnonymousAccessBig.png

Anonymous access allowed

One or more enabled protocols allow clients to access the namespace without presenting user credentials for authentication.

NamespacesWithDPL1.png

DPL 1 namespace is not replicating

The namespace has a DPL of 1 (one) and is not being replicated. All HCP namespaces with a DPL of 1 should be replicated to ensure that the stored data is protected. If replication is not available, increase the namespace DPL.

This alert appears only in HCP systems in which setting the DPL to one for a namespace can leave objects unprotected.

HardQuotaExceeded.png

Hard quota exceeded

The amount of storage used by the namespace exceeds the hard quota configured for the namespace. Clients will not be able to add data to the namespace until either some existing objects are deleted or you increase the hard quota.

IrreparableObjects-Alert.png

Irreparable and unavailable objects

The namespace contains irreparable objects and unavailable objects. Please contact your HCP system administrator.

To see which objects are irreparable, go to the Irreparable Objects panel for the namespace. For information on this panel, see Working with irreparable objects.

IrreparableObjects-Alert.png

Irreparable objects

The namespace contains irreparable objects. Please contact your HCP system administrator.

To see which objects are irreparable, go to the Irreparable Objects panel for the namespace. For information on this panel, see Working with irreparable objects.

FullFileSystem.png

Namespace setting for CIFS authenticated access not supported by system configuration

The namespace requires authentication for CIFS-based data access. However the system is currently not configured to support the use of authenticated CIFS.

NamespaceNonReplicatingObjects.png Nonreplicating objects The namespace contains objects that are not replicating. Please contact your HCP system administrator.

SoftQuotaExceeded.png

Soft quota exceeded

The amount of storage used by the namespace exceeds the soft quota configured for the namespace. Consider deleting some objects from the namespace or increasing its hard quota.

IrreparableObjects-Alert.png

Unavailable objects

The namespace contains unavailable objects. Please contact your HCP system administrator.

VersioningAppendableBig.png

Versioning enabled without REST API

The namespace has versioning enabled, but the REST API is not enabled. Versioning works only with the REST API.

© 2015, 2019 Hitachi Vantara Corporation. All rights reserved.

Search page alert


Icon

Mouse-over text

Description

ContentClassNoIndexing.png

Namespaces without custom metadata indexing

The content class is associated with one or more namespaces for which custom metadata indexing is disabled. The metadata query engine is not indexing content properties for objects in those namespace.

© 2015, 2019 Hitachi Vantara Corporation. All rights reserved.

Users page alert


Icon

Mouse-over text

Description

UsernameConflictIcon.png

Conflicting user accounts

Another user account has the same username as this account Resolve the conflict by merging or separating the conflicting accounts.

© 2015, 2019 Hitachi Vantara Corporation. All rights reserved.