Skip to main content

We've Moved!

Product Documentation has moved to docs.hitachivantara.com
Hitachi Vantara Knowledge

About IO control service templates

Ops Center Automator IO control service templates enable you to control IO performance.

The following Ops Center Automator IO control service templates are provided with the software and are preconfigured:

  • Get IO Control

    This service template gets IO control setting information.

  • Set IO Control

    This service template sets the IO control of a WWN or iSCSI name and the volume that has LUN paths. If the IO control is already set for the specified resources, then the setting is overwritten.

  • Remove IO Control

    This service template removes the IO control setting from the WWN or iSCSI name and volume.

 

  • Was this article helpful?