Skip to main content

We've Moved!

Product Documentation has moved to docs.hitachivantara.com
Hitachi Vantara Knowledge

Adding EMC VNX File probe

The EMC VNX file probe collects the NAS configuration and NAS performance data from the VNX file storage systems.

Before you begin

A user with an minimum nasadmin (Operator) role with access to the CLI must be available on the storage system. For this, verify that the nasadmin operator role and CLI access allowed options are selected while creating a user.

Procedure

  1. On the Analyzer probe home page, click Add Probe.

  2. In the Add Probe window, from the Probes list, select VNX File.

  3. In the VNX File Probe Details window, type the following details, and then click Next:

    • IP Address: IP address of VNX File control station.
    • Username: User name to log on to the VNX file storage.
    • Password: Password to log on to the VNX File storage.
  4. In the Validation window, click Next, and then click OK.

  5. In the Status window, in Action, click Start to start collecting data.

 

  • Was this article helpful?