Postupgrade guidelines
After a successful upgrade, certain custom settings may require resetting to that all items are displayed correctly in the Ops Center Analyzer web user interface.
Check the following:
- Content display
If any tables is missing content or displays content incorrectly, select OK to clear the settings saved in the browser.
, and then clickThis procedure also clears the following information:
- Table configuration information (column settings, column widths, column sorting status, filtering status)
- History of search keywords
- Connection settings with Ops Center Automator
If you upgrade the components from version 3.1.0-01 or earlier, the connection settings with Ops Center Automator are disabled. If you are using the I/O control configuration function using Ops Center Automator, perform the procedure for Reconfiguring the connection with Ops Center Automator after an upgrade.
- Data collection method
If you upgrade the components from a version earlier than 4.1.0, you can choose the data collection method by specifying the
Access Type
in the instance information for all RAID Agent instances.Access Type
corresponds toMethod for collecting
in versions earlier than 4.1.0. We recommend revising the settings because, in addition toAccess Type
, other items in the instance information are also changed.If you change the value of
Access Type
, make sure that the value of the collection interval for RAID Agent and the value of the collection interval for the Hitachi Enterprise Storage probe are the same. If these values do not match, change one or both of the values so that the specified collection intervals are the same.