Skip to main content

We've Moved!

Product Documentation has moved to docs.hitachivantara.com
Hitachi Vantara Knowledge

Upgrade workflow

Run the installer to upgrade the following components:

  • Analyzer server
  • Analyzer detail view server
  • Analyzer probe server (including the RAID Agent on the same host)
  • Windows probe
NoteIf you are using Tuning Manager - Agent for RAID, check whether it is supported by the upgraded version of Ops Center Analyzer. If it is not supported, you must upgrade Tuning Manager - Agent for RAID. For the upgrade procedure, see the Hitachi Command Suite Tuning Manager Installation Guide.

The following figure shows the sequence of tasks for upgrading Ops Center Analyzer. Even if you used a virtual appliance to complete the initial installation, you must use the installers when upgrading. Note that you must also follow this sequence of tasks if you are upgrading to Ops Center Analyzer from Infrastructure Analytics Advisor.

GUID-46E7067D-B9BA-4815-B87A-44338D81B2A2-low.gif