Add and manage probes on the Analyzer probe server
- Last updated
- Save as PDF
Start collecting information about your system resources by adding probes to the Analyzer probe server. After adding the probes, you manage them from the Analyzer probe server UI (home page).
- Child Topics
- Installing the third-party storage probe add-on package
- Configuring the RAID Agent to monitor Hitachi Enterprise Storage Systems
Before adding the Hitachi Enterprise Storage probe, you choose and configure the RAID Agent based on your monitoring environment and data collection requirements to monitor VSP, VSP F series, VSP G series, VSP 5000 series, or HUS VM.
- Adding Hitachi Enterprise Storage probe
The Hitachi Enterprise Storage probe collects data about the following Hitachi Enterprise storage systems: VSP, VSP F series, VSP G series, VSP 5000 series, and HUS VM. This procedure presumes you are using the RAID Agent bundled with Analyzer server. The procedure is the same for using Tuning Manager - Agent for RAID.
- Adding Hitachi Adaptable Modular Storage (AMS) probe
- Adding Hitachi NAS probe
Hitachi NAS probe collects configuration and performance data for the Hitachi NAS platform. There are two types of Hitachi NAS configurations: External SMU and Internal SMU. The Hitachi NAS probe collects configuration data using REST API, and performance data using RUSC CLI.
- Adding
IBM XIV® probe
The IBM XIV® probe collects configuration and performance data from IBM XIV® storage systems.
- Adding EMC VNX File probe
The EMC VNX file probe collects the NAS configuration and NAS performance data from the VNX file storage systems.
- Adding EMC VNX Block probe
EMC VNX block probe collects data from VNX storage systems.
- Adding EMC XtremIO probe
EMC XtremIO probe collects configuration and performance data from the EMC XtremIO storage systems.
- Adding EMC VMAX probe
EMC VMAX probe collects data from EMC VMAX storage systems.
- Adding NetApp probe
The NetApp probe collects configuration and performance data from NetApp storage systems using the ONTAP API.
- Adding Pure Storage probe
Pure Storage probe collects configuration and performance data from the Pure Storage storage systems.
- Adding HPE 3PAR probe
The HPE 3PAR probe collects configuration and performance data from HPE 3PAR StoreServ Storage systems.
- Adding VMware probe
VMware probe collects data from the VMware vCenter server and standalone VMware ESXi host.
- Adding Brocade FC Switch (BNA) probe
Brocade FC Switch (BNA) probe collects configuration and performance data about the brocade switches from Brocade Network Advisor using REST API. Brocade Network Advisor manages the entire Brocade IP address and SAN portfolio for unified network visibility and control.
- Adding Brocade FC Switch (CLI) probe
Brocade FC Switch (CLI) probe collects the performance and configuration data using the CLI commands from the individual Brocade FC Switch. The probe logs on to the switch using SSH and runs CLI commands to collect the data.
- Adding Cisco FC Switch (DCNM) probe
The Cisco FC Switch (DCNM) probe collects data from the Cisco Data Center Network Manager using Web Services APIs.
- Adding Cisco FC Switch (CLI) probe
Cisco FC Switch (CLI) probe collects the performance and configuration data using the CLI commands from Cisco SAN switches.
- Adding Linux probe
The Linux probe collects performance and configuration data from individual machines running the Linux operating system.
- Initial setup after adding a probe
After adding a probe, check if the Analyzer detail view server is collecting data.
- Installing Analyzer Windows probe
- Managing probes on the Analyzer probe server
You manage individual probes and the server by using the Analyzer probe server UI.